Case-IH

Description: Corn Concave Set with Built-In Extension,  1 Front & 2 Rear (29-Bar) Models/Applications: 1480, 1680, 1688, 2188, 2388, 1480, 1680, 1688, 2188, 2377, 2388, 2577, 2588, 5088, 5130, 5140 SN( , FYG014001), 6088, 6130, 6140 SN( , YFG014001) 7088, 7130, 7140 SN( , YFG014001) OEM Reference Number: B96125, 193782C6, 193783C1, 193783C2, 193783C3, 193783C4, 193783C5, 1300860C1, 1318551C1, 1318556C1, 386188A1, 386189A1, 418645A1, 418646A1, 2356288R91, 47607204, 87300871, 87300873 MADE IN THE USA!

Models/Applications: 1000 Series, 1063, 1083, 1064, 1084  Replaces: 1327209C1

Models/Applications: 1640, 1644, 1660, 1666, 1670, 2144, 2166, 2344, 2366, 1640, 1644, 1660, 1666, 1670, 2144, 2166, 2344, 2366 Replaces: 1317484C2

Models/Applications:900 Series, 1000 Series, 40 Series, 90 Series, 943, 963, 983, 944, 964, 984, 1043, 1063, 1083, 1044, 1064, 1084, 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294 Replaces:

Models/Applications:800 Series, 900 Series, 1000 Series, 843, 844, 863, 864, 883, 884, 943, 944, 963, 964, 1063, 1064, 1083, 1084 Replaces:199491C1

Application/Models: 243, 244, 343, 344, 443, 444, 493, 494, 543, 546, 594, 642, 643, 644, 645, 692, 693, 694, 842, 843, 844, 892, 893, 894, 243, 1290, 1291, 1294, 544 OEM Brand: JD  Application/Models: 1043, 1044, 1054, 1063, 1064, 1083, 1084, 2206, 2208, 2212, 800, 823, 824, 833, 834, 843, 844, 853, 854, 863, 864, 873 OEM Brand: IH Application/Models: 96C1220, 96C1222, 96C1230, 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 974, 98C1220, 98C1222, 98C1230, 996N6 OEM Brand: FRD / NH Reference Number(s): AN102009, 113399rR91, 176279C91, AH91367, AH229064, 2221-32821, B1SB251, 176279C91, 251-E, 1306953C91, 610831, , 1133997R1 Part Features: Hardened pins for extended wear

AH136671-N — 48-Link, 8-Lug Gathering Chain – Chrome Pins Description: Chrome-pin gathering chain for John Deere 40 and 90 Series corn heads and compatible Case IH® and New Holland® corn heads using the same CA555 eight-lug chain configuration. This gathering chain works as part of a pair to pull stalks and ears rearward through the row unit and into the corn head. Chrome pins provide a harder wear surface at the pin-and-bushing joint, helping reduce chain elongation and extend service life in abrasive harvest conditions. Models/Applications: John Deere®:40 Series and 90 Series corn heads, including 243, 343, 443, 493, 543, 643, 693, 843, 893, 1243, and 1293 models and their corresponding row-spacing configurations using OEM part number AH136671. Case IH®:2200, 2400, 3200, and 3400 Series corn heads through model year 2010, including 2206, 2208, and 2212. Also fits select earlier 800 and 1000 Series applications using the same CA555 eight-lug gathering chain. New Holland®:Select 974, 996, 96C, 98C, and 98D corn heads through model year 2010 using the same eight-lug chain configuration. OEM Brand:John Deere® / Case IH® / New Holland® Reference Number(s):AH136671, 86978515 Part Features: CA555 endless gathering chain 48 links 8 gathering lugs Chrome pins for increased wear resistance Sold individually Two gathering chains required per row Fitment Note: This is the eight-lug chain configuration. Case IH® and New Holland® corn heads manufactured in 2011 and later may use the six-lug gathering chain that replaces OEM part number 84284709. On Case IH® 2206, 2208, and 2212 heads, verify the serial-number break at HAJ0003469 or confirm the existing OEM part number before ordering. Service Tip: When installing new gathering chains, inspect the drive and idler sprockets for hooked, pointed, or unevenly worn teeth. Worn sprockets can accelerate wear on a new chain. For consistent feeding and adjustment, replace both gathering chains on the row together and set chain tension and lug timing according to the equipment manufacturer’s instructions.

Models/Applications:2344,2366,2388,2144,2188,2166,2344,2366,2388,2144 SN(JJC0172845),2188 SN(JJC0191483),2166 SN(44C0180000,) Replaces:199006A2

Models/Applications: 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084  OEM Brand: IH Reference Number(s): 199381C1 Part Features: Stationary/manual adjust deck plate - beveled - 1 per row Material: USA Steel Proudly Made In The USA!

Description: 2000 & 3000 Case-IH Series Snout, Fender AND 20" Center, POLY ONLY Fitments:  Fender Snout: 2206, 2208, 2212, 2216, 2406, 2408, 2412, 2416, 3206, 3208, 3212, 3216 20" Center Snout: Fits Case IH® 2200, 2400, 2600 Series & 3400 Series (3412, 3416, 3418) OEM Brand: Case-IH® OEM Reference Number(s): 86980203 Upgrade or replace worn corn head poly with this Case IH® 2000, 3000 & 3400 Series Snout, OEM reference 86980203. This poly-only replacement snout is designed for use as a fender snout on Case IH® 2206, 2208, 2212, 2216, 2406, 2408, 2412, 2416, 3206, 3208, 3212 and 3216 corn heads, and as a 20" center snout on select Case IH® 2200, 2400, 2600 and 3400 Series corn heads, including 3412, 3416 and 3418 models. A direct replacement option for damaged, cracked or worn corn head snout poly, Landbouw™ 86980203-N helps keep your Case IH corn head ready for harvest.

Description: 4000 Series Case-IH­­­ Center Snout, 30" (POLY ONLY) Fitments: 4206, 4208, 4212, 4406, 4408, 4412 OEM Brand: Case-IH® OEM Replacement Number(s): 48116083, 84518884, 47468213 Replace the Damaged Poly—Not the Entire Divider Assembly Landbouw 48116083-N is an aftermarket inner crop-divider snout designed for select Case IH® corn heads using OEM crop divider 48116083. It also replaces the earlier 84518884 and 47468213 crop-divider numbers. Whether you call it an inner crop divider, center snout, divider snout or poly hood, this is the molded red body positioned between the row units. It helps lift and guide standing or down corn toward the gathering chains while maintaining smooth crop flow through the head. Molded from UV-Protected LLDPE This crop-divider snout is molded from linear low-density polyethylene (LLDPE) with UV-protected red colorant incorporated into the material. LLDPE provides the flexibility and impact tolerance needed in demanding harvest conditions. Because the color is molded into the plastic rather than painted onto the surface, there is no painted finish to chip, peel or wear away. The UV-protected colorant also helps protect the snout’s appearance during prolonged outdoor and seasonal exposure. Product Highlights Aftermarket inner crop-divider snout for select Case IH corn heads Replaces OEM crop divider 48116083 Also replaces earlier OEM numbers 84518884 and 47468213 Molded from flexible, impact-tolerant LLDPE UV-protected red colorant incorporated into the material Molded-in color with no painted coating to chip or peel Replaces the individual poly body without requiring the complete divider kit Designed to reuse existing divider components when they remain serviceable Compatible Case IH Corn Heads Common applications include: 4206 4208 4406 4408 4412 4412F 4416 This crop-divider snout is also used with the applicable plastic-update configuration on select: 3406 3408 3412 3416 3418 Fitment can vary by configuration and previous updates. Before ordering, verify that the existing crop-divider body carries OEM number 48116083, 84518884, or 47468213. Part-Number Cross Reference Landbouw part number: 48116083-N Replaces current OEM number: 48116083 Replaces earlier OEM number: 84518884 Replaces earlier OEM number: 47468213 Related complete OEM divider kit: 47830188 The replacement history is: 47468213 → 84518884 → 48116083 → Landbouw 48116083-N OEM number 47830188 identifies the larger complete divider kit. That kit includes OEM crop divider 48116083 along with additional mounting and wear components. What Is Included? This listing includes: One Landbouw 48116083-N molded crop-divider snout The point, mount, wear strips, flaps, plates, spring, pins, fasteners and other installation hardware included with complete OEM kit 47830188 are not included. Existing components may be transferred to the new snout when they are still in serviceable condition. Inspect all mounting, wear and retention components before installation. Does It Fit a Case IH C508 or C508C? No catalog-supported interchange has been identified between 48116083 and the inner hood used on the newer Case IH C500 Series. Current C508 and C508C parts catalogs identify the red inner hood as OEM number 51449695. Do not order 48116083-N for a C508 or C508C unless physical interchangeability has been independently confirmed. Frequently Asked Questions Does 48116083-N replace 84518884 and 47468213? Yes. OEM number 48116083 superseded 84518884, and 84518884 previously superseded 47468213. Landbouw 48116083-N is designed as the aftermarket replacement for this crop-divider body. Is this the complete 47830188 divider kit? No. This product replaces the molded crop-divider snout contained within complete OEM kit 47830188. It does not include the point, mount, wear strips, spring, flaps, plates or installation hardware supplied with the complete kit. Is “crop divider” the same as “snout”? In this application, the terms crop divider, divider snout, inner snout, center snout and poly hood are commonly used to describe the molded divider body located between the corn-head row units. How should I verify fitment? The most reliable method is to match the number on the existing crop-divider body. If your current part is identified as 48116083, 84518884 or 47468213, Landbouw 48116083-N is the corresponding replacement. Case IH® and associated OEM part numbers are used for identification and fitment reference only. Landbouw is not affiliated with or endorsed by CNH Industrial or Case IH.

Description: Lower Clean Grain Auger for Case IH® Combine Fitments: 5088, 5130, 5140, 6088, 6130, 6140, 7088, 7130, 7140 OEM Brand: Case-IH® OEM Reference Number: 87510720 Availability: This item is produced as orders are received. Please call for current availability and estimated lead time. MADE IN THE USA! Specifications:   Type Extended Wear Overall Length 76.625 Shaft Diameter 1 1/2" Pitch 9 Flighting Diameter 8.5 Flighting Thickness 0.25 Balanced No Flighting Direction Right Hand Flighting Length 61.875 The Lower Clean Grain Auger for Case IH® combines is built for extended wear and dependable performance. Designed to fit models 5088, 5130, 5140, 6088, 6130, 6140, 7088, 7130, and 7140, it replaces OEM 87510720. With a 76.625" overall length, 1-1/2" shaft diameter, and heavy-duty 0.25" flighting, this right-hand auger is engineered for durability and long service life. Proudly Made in the USA, it ensures smooth and efficient grain handling season after season.

Description: IH 1000 Series Chain & Sprocket Kit (1 Per Row) - Non-Greaseable Sprockets Fitments: 1043, 1063, 1083, 1043  OEM Brand: Case IH® KIT Includes:  AN102009-N (2) AH101219-N (2) 199497C1-G (2)

Description: Combine Stalk Chopper Blade fits Case IH Details:  Replaces Case-IH part numbers 47818715, 84340041, 84976065 Heat Treated Tungsten Carbide Other Parts You May Need: Bolt: (84972753), Bushing: (322630350), Nut and washer Fitments:  Case-IH® 2606, 2608, 2612, 4206, 4208, 4406, 4408, 4412, 4416, 4418, 4408F, 4412F  New Holland® 99C, 980CF, 980CR OEM Brand: Case IH®, New Holland® OEM Reference Number(s): 47818715,84340041, 84976065

Models/Applications: Case IH: 3206, 3208, 3212, 3406, 3408, 3412, 3416, 3418 New Holland: 98D (with knife rolls) OEM Brand: Case IH / New Holland Part Notes: Left-hand stalk roll shaft assembly includes shaft, cast spiral point, water pump bearing, and steel shield. Designed for smooth crop feeding, efficient stalk processing, and long service life. Material: High-strength, precision-machined steel with cast spiral point and durable steel shielding PROUDLY MADE TO OEM SPECIFICATIONS