Case-IH

Models/Applications: Case IH: 3206, 3208, 3212, 3406, 3408, 3412, 3416, 3418 New Holland: 98D (with knife rolls) OEM Brand: Case IH / New Holland Part Notes: Complete knife roll replacement kit for 3000 Series corn heads. Contains everything needed to replace both left-hand and right-hand stalk roll shafts, knives, and related hardware to restore optimal cutting and feeding performance. Kit Includes: (1) 84417940-N – Stalk Roll Shaft with Point, LH (1) 84417943-N – Stalk Roll Shaft with Point, RH (8) 87598741-C – Combination Stalk Roll Knife (CNH 900, 1000, & 3000 Series) (22) P1/2X1CS8 – 1/2" GR8 x 1" Bolt (30) P1/2FW8 – 1/2" GR8 Flat Washer (4) P1/2X23/4CS8 – 1/2" x 2-3/4" GR8 Bolt (6) P1/2LW – 1/2" Lock Washer (4) P1/2NG8 – 1/2" GR8 Nut (2) P1/2X21/2SH5C – Square Stalk Roll Set Screw (4) 199806C1-N – Large Stalk Roll Shim (4) 199408C1-N – Small Stalk Roll Shim (4) 1327159C1-N – Small Stalk Roll Shim (2) 176301C1-N – Drive Coupler (1) 1327204C1-N – LH Stalk Roll Shaft Support (1) 1327205C1-N – RH Stalk Roll Shaft Support Material: High-strength, precision-machined steel and hardened high-carbon steel knives PROUDLY MADE TO OEM SPECIFICATIONS Description:Restore your header’s cutting performance with this complete Case IH 3000 Series Knife Roll Replacement Kit. This all-in-one package includes both left-hand and right-hand stalk roll shafts with points, hardened combination stalk roll knives, precision shims, and all required mounting hardware. Designed to meet OEM specifications, the kit ensures smooth crop feeding, efficient stalk processing, and reduced downtime in the field.

Models/Applications: Case IH: 3206, 3208, 3212, 3406, 3408, 3412, 3416, 3418 New Holland: 98D (with knife rolls) OEM Brand: Case IH / New Holland Part Notes: Left-hand stalk roll shaft assembly includes shaft, cast spiral point, water pump bearing, and steel shield. Designed for smooth crop feeding, efficient stalk processing, and long service life. Material: High-strength, precision-machined steel with cast spiral point and durable steel shielding PROUDLY MADE TO OEM SPECIFICATIONS

Models/Applications: Case IH: 3206, 3208, 3212, 3406, 3408, 3412, 3416, 3418 New Holland: 98D (with knife rolls) OEM Brand: Case IH / New Holland Part Notes: Right-hand stalk roll shaft assembly includes shaft, cast spiral point, water pump bearing, and steel shield. Designed for smooth crop feeding, efficient stalk processing, and long service life. Material: High-strength, precision-machined steel with cast spiral point and durable steel shielding PROUDLY MADE TO OEM SPECIFICATIONS

The LANSSCIH20/30 is a Lankota Stalk Stomper® mounting kit for Case IH® 2200, 2400, 3200, and 3400 Series corn heads. The kit mounts right to the row unit main arm beam. The kit contains the mounts and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stomper® shoes are not included in this kit, and are sold separately. The following items are required to cover 2 rows of a Case IH® 2200, 2400, 3200,or 3400 Series corn head: (1) LANSSCIH20/30: Mounting Kit (2) LANSS755BLK: Stalk Stomper® Shoes with Poly Installation Instructions

Description: Snout Wear Strip Kit- RH Stainless Steel 2200, 2400, 3400, 2600, 996, 96C, 98C, 98D Fitments: 2200, 2400, 3400, 2600, 996, 96C, 98C, 98D OEM Brand: Case-IH® - New Holland® OEM Reference Number: 86980207 *Kit Includes Hardware* MADE IN THE USA!

Description: Case IH/New Holland Bolt  Fitments:  Case IH 4-WD Tractors: 9370, 9380, 9390, 9350(1995-2000) Steiger Series (4-WD): 9270, 9280 (early to mid-1990s) Corn Headers: 2212 (12 Row 22'' and 30'' Spacing, 2001-2006) OEM Reference Number: 86642643  Specs:  Type: Hex Bolt  Size: 1/2'' - 13NC x 8-1/2'' Grade: 8

Fits Models: 2206, 2208, 2212, 2406, 2408, 2412Includes: Replacement Knife Roll Components (excluding the cast piece inside the tube)Note: Cast tube insert not included. Description: This replacement kit is designed for Case-IH® 2200 and 2400 Series corn heads, offering a direct-fit solution for worn or damaged knife rolls. Built to match OEM specifications, it restores chopping performance and feed quality. Benefits: High-quality aftermarket replacement Saves time and money by replacing only what’s needed Compatible with multiple row configurations (6, 8, and 12-row heads) Pre-boxed for convenience

Description: LH Deck Plate (New Case IH® Corn Heads) Fitments: 4408-22, 4412-20, 4412-22, 4416-20, 4416-22, 4418-20, 4418-22, C508, C512, C516, C518, C508C, C512C, C516C, C518C OEM Reference Number(s): 91718313 OEM Brand: Case IH® MADE IN AMERICA!

Description: RH Deck Plate (New Case IH® Corn Heads) Fitments: 4408-22, 4412-20, 4412-22, 4416-20, 4416-22, 4418-20, 4418-22, C508, C512, C516, C518, C508C, C512C, C516C, C518C OEM Reference Number(s): 91718313 OEM Brand: Case IH® MADE IN AMERICA!

The LANSS4412R8N is a Lankota Stalk Stomper® mounting kit for the outside four rows on each side of a Case® 4412 Series (and New Holland® like models) 20" corn head. The kit contains the toolbars, mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stomper® shoes are not included in this kit, and are sold separately. Use with eight LANSS755BLK (Gen II Lankota Stalk Stomper® Shoes with Poly). Installation Instructions

The LANSS4412R6N is a Lankota Stalk Stomper® mounting kit for rows 2, 3, 4 & 9, 10, 11 on each side of a Case® 4412 Series (and New Holland® like models) 20" corn head. The kit contains the toolbars, mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stomper® shoes are not included in this kit, and are sold separately. Use with six LANSS755BLK (Gen II Lankota Stalk Stomper® Shoes with Poly). Installation Instructions *Expect roughly 1 hour for installation of this product

The LANSS4412R6 is a Lankota Stalk Stomper® mounting kit for CaseIH® 2612/4212/4412 Series 30" corn heads, & New Holland® 99 Series corn heads. The kit contains the toolbars, mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stomper® shoes are not included in this kit, and are sold separately. The following items are required to cover 6 rows: (1) LANSS4412R6: Mounting Kit (6) LANSS755BLK: Stalk Stomper® Shoes with Poly Installation Instructions *Expect roughly 2 hours for installation of this product

The LANSS4412R4FH is a Lankota Stalk Stomper® mounting kit for CaseIH® 2612/4212/4412 Series & New Holland® 99 Series hydraulic folding corn heads. The kit contains the toolbars, mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stomper® shoes are not included in this kit, and are sold separately. The following items are required to cover 4 rows: (1) LANSS4412R4: Mounting Kit (4) LANSS755BLK: Stalk Stomper® Shoes with Poly Installation Instructions *Expect roughly 2 hours for installation of this product

The LANSS4412R4 is a Lankota Stalk Stomper® mounting kit for CaseIH® 2612/4212/4412 Series 30" corn heads, & New Holland® 99 Series corn heads. The kit contains the toolbars, mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stomper® shoes are not included in this kit, and are sold separately. The following items are required to cover 4 rows: (1) LANSS4412R4: Mounting Kit (4) LANSS755BLK: Stalk Stomper® Shoes with Poly Installation Instructions *Expect roughly 2 hours for installation of this product