Shanks & Tines

2A SERIES TOOTH BAR SHANK Tooth shank, wrap around top leg tooth holder, will fit up to a 1.5" thick bucket. Use with Y8002AC bucket tooth. UPC 758351804838

AGRITUF DANISH POINT 4" - 7/16 BOLT HOLE Series AgriTuf Application Field Cultivator Product Type Danish Cultivator Shank Size/Angle Danish S-Tine Width 4 Inch Extended Wear Yes Material Hi-Strength Chrome Alloy Bolt Size 7/16 Inch Hex Bolt Bolt Hole Size 7/16 Inch Number of Bolt Holes 1 Brand AGRITUF

8" CIH NO-TILL RIPPER POINT 8 inch No-Till Ripper Point. Fits Case IH 2500 In-Line Ripper. Replaces CNH 87388006. Brand AgSmart Application Ripper / Subsoiler For Shank Size 3/4 Inch No-Till Product Type Ripper Point Width 8 Inch

MELROE HARROW TINE REPLACE 6502210 Application Field Cultivator Product Type Harrow Coil Tine Width 7-3/4 Inch Length 12 Inch Tine Type Double Coil Wire 0.312 Coil ID 1.32 Inch Length Range 10 - 12 Inches Between Coils 3-1/8 Inch For Make Melroe Brand AgSmart

HERMAN/SUMMERS HARROW TINE 8H1150 Replaces 8H-1150. Application Field Cultivator Product Type Harrow Coil Tine Width 9 Inch Length 17-1/2 Inch Tine Type Double Coil Wire 0.375 Coil ID 2 Inch Length Range > 16 Inches Between Coils 5-1/2 Inch For Make Summers Brand AgSmart

Description: GLENCOE HARROW TINE-P1546 Fits Glencoe Harrow and Row Crop Cultivators. Application Field Cultivator Product Type Harrow Coil Tine Width 2-7/8 Inch Length 11-5/16 Inch Tine Type Single Coil Wire 0.375 Coil ID 2.5 Inch Length Range 10 - 12 Inches For Make Glencoe Brand AgSmart

CASE IH POLY SHANK PROTECTOR 1 hole and 1 slot for 7/16 inch bolts on 1-5/8 inch -2 inch centers. Will replace CNH 892911X Application Field Cultivator Product Type Shank Protector Width 1-3/4 Inch Thickness 1/4 Inch Length 8-3/4 Inch Bolt Size 7/16 Inch Color Gray Brand AgSmart

SLICER TINE SPLT ROW GANG ASSM

SLICER TINE GANG SCRAPER

SHANK 5/8 X 2 X 36 W/CHROME PT.

WEEDER SHANK

23 SERIES TOOTH BAR SHANK 23 series tooth bar shank. 4.4 lbs. UPC 758351997165

23 SERIES CAST SHANK BOLT-ON 23 series cast shank, bolt-on.

SPRING TRIP CLAMP W/O SHANK CLAMP

AGRITUF CHROME SHANK GUARD FOR JD Shank wear guard for John Deere Rippers with 1-1/4" Shank. Attaches with two 3/8 x 2-1/4 roll pins - RP24-18 or RP24-18-5 For Shank Size 1-1/4 Inch Hardware Required RP24-18 or RP24-18-5 Material Hi-Strength Chrome Alloy Product Type Shank Guard Series AgriTuf