Shanks & Tines

AGRITUF DANISH S-TINE POINT 7" Application Field Cultivator Bolt Hole Size 7/16 Inch Brand AGRITUF Extended Wear Yes Material Hi-Strength Chrome Alloy Product Type Danish Cultivator Series Agrituf Shank Size/Angle Danish S-Tine Width 7 Inch Bolt Size 7/16 Inch Hex Bolt Number of Bolt Holes 1

AGRITUF DANISH S-TINE POINT 4" Application Field Cultivator Bolt Hole Size 3/8 Inch Bolt Size 7/16 Inch Hex Bolt Product Type Danish Cultivator Shank Size/Angle Danish S-Tine Width 4 Inch Number of Bolt Holes 1 Extended Wear Yes Series AgriTuf Material Hi-Strength Chrome Alloy Brand AGRITUF

AGRITUF DANISH S-TINE POINT 3" Series Agrituf Application Field Cultivator Product Type Danish Cultivator Shank Size/Angle Danish S-Tine Width 3 Inch Extended Wear Yes Material Hi-Strength Chrome Alloy Bolt Size 3/8 Inch Hex Bolt Bolt Hole Size 3/8 Inch Number of Bolt Holes 1 Brand AGRITUF

AGRITUF DANISH S-TINE POINT 1-1/2"

AGRITUF DANISH S-TINE POINT 1" Series Agrituf Application Field Cultivator Product Type Danish Cultivator Shank Size/Angle Danish S-Tine Width 1 Inch Extended Wear Yes Material Hi-Strength Chrome Alloy Bolt Size 3/8 Inch Hex Bolt Bolt Hole Size 3/8 Inch Number of Bolt Holes 1 Brand AGRITUF

RIPPER POINT FOR UNVERFERTH Cast Ripper Point for Unverferth Rip Strip. Fits shank tip #65117 Length 11 Inch Width 1-3/4 Inch For Shank Size 3/4 Inch Bolt Size 3/4 Inch Brand AgSmart Application Ripper / Subsoiler Product Type Ripper Point

BOOTED RIPPER POINT-BOY DOG, MG DICKEY 1 inch thick (without cap) X3 inch wide X 14-3/4 inch overall length. Full chrome cap installed. For 1-1/2 inch shank. Uses 444-RP12X3 roll pin.

NO TILL 3/4" SHANK CASEIH - NEW STYLE 3/4 inch No-Till Shank for Case IH EcoloTill 2500, 2500 Rip-Strip, 2500 Rip-Bed, DMI 2500 built in 2008 and after. 24-1/8 inch Long x 6 inch Wide x 3/4 inch Thick. Replaces 87665693.For units built before 2008, order 972-33020046 Application Ripper / Subsoiler Product Type Ripper Point Width 6 Inch Thickness 3/4 Inch For Shank Size 3/4 Inch No-Till Length 24-1/8 Inch Material Steel Brand AgSmart

SHANK GUARD 14" 1/2 ROUND

KMC/UNVERFERTH RIPPER POINT Has oblong mounting hole for dual applications, KMC and Unverferth. 1-3/8 inch square base and narrow boot for 3/4 inch shank, wear cap and fin. Will replace KMC 16-080-282. Brand AgSmart Application Ripper / Subsoiler Product Type Ripper Point

KMC BOOTED SUBSOILER POINT16-080-102 1-3/4" wide x 1-1/4" thick x 10 7/8" long. 13/16" boot for 3/4" shank. KMC 16-080-102

KMC BOOTED SUBSOILER POINT 1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075 Brand AgSmart

NO TILL 3/4" SHANK CASEIH - OLD STYLE 3/4 inch No-Till Shank for Case IH and DMI EcoloTill 2500, 2500 Rip-Strip, 2500 Rip-Bed prior to 2008.  Replaces 33020046.  For units built after 2008, order 972-87665693 Application Ripper / Subsoiler Product Type Ripper Point Width 6 Inch Thickness 3/4 Inch For Shank Size 3/4 Inch No-Till Length 25 Inch Material Steel Brand AgSmart

KMC BOOTED SUBSOILER POINT 1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096. Brand AgSmart

WILRICH HARROW TINE-41410/16429 Application Field Cultivator Product Type Harrow Coil Tine Width 3-3/8 Inch Length 16 Inch Tine Type Double Coil Wire 0.375 Coil ID 1.625 Inch Length Range > 14 - 16 Inches Between Coils 5 Inch For Make Wil-Rich Brand AgSmart