6-30-AL -- 6 Row 30" JD/IH Auger Liner
$320.00
Models/Applications: 800 Series, 900 Series, 1000 Series, 40 Series, 90 Series, 863, 963, 1063, 643, 693
89991519 -- 20'' Bifold End Main Pivot Bracket
$116.95
Models/Applications:CM1215, CM1615, CM2415, CM1220, CM1620, CM1820
Replaces:
AH140825-N -- Left Hand Deck Plate Cover
$52.00
Models/Applications: 493, 494, 693, 694, 893, 894, 1293, 1294
OEM Brand: JD
Reference Number(s): AH140825
Part Features: Cover that mounts on top of the hydraulically controlled deck plate
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!
AH147773-B -- Left Hand Deck Plate - Beveled (Hydraulic)
$90.00
Models/Applications: 493, 693, 893, 1293, 494, 694, 894, 1294
OEM Brand: JD
Reference Number(s): AH147773
Part Features: Beveled to provide more surface area with the kernel as it hits the deck plate, to try and reduce butt-shelling/kernel loss - hydraulically adjust deck plate - hard surfaced for prolonged wear
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!
W10000015A -- John Deere Wedge with PTO Shafts Hex Clamp 21-Spl Couple
$1,500.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244
OEM Brand: JD
Part Features: This wedge kit helps provide a more optimal operating level to your corn head by flattening it out
Kit Includes: Wedge kit with PTO shafts
Warning: Not applicable to heads mounting on 'Side Hill' combines
Installation Instructions: This wedge kit mounts on the base of the feeder house section of the corn head using bolts. Minimal, to no, fabrication required. Installation instructions to be provided upon delivery of this kit.
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!
AH148769-N -- JD Gathering Hex Drive Shaft - New
$97.50
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294
OEM Brand: JD
Reference Number(s): AH148769
Part Features: Heat treated shaft & gear
Other Notes: For use on JD 40 & 90 series corn heads - 2 per gearbox
AN102006-N -- Input Spur Gear Oil Seal
$7.79
Models/Applications:40 Series, 90 Series, 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294
Replaces: AN102006
87029139-N -- Idler Sprocket Support Arm
$28.50
Models/Applications: 3206, 3208, 3212, 3406, 3408, 3412, 2206, 2208, 2212, 2406, 2408, 2412
Replaces: 87029139
OEM Brand: Case IH® & New Holland®
99801234 -- Idler Sprocket # 80 Chain 12 Tooth - 3/4'' Bearing Hole
$54.50
Models/Applications:690, 693, 694, 890, 893, 894, 1290, 1293, 1294, 606, 608, 612, 616, 618
AH227072BK -- Stalk Roll Knife & Auger Bolt Kit - 1 Used per Row 90 Series
$29.07
Models/Applications: 693, 893, 1293, 694, 894, 1294
OEM Brand: JD
Reference Number(s):
Other Notes: For use on JD 90 series corn heads - 1 kit per row
Finish: Paint Black
1327126C1-N -- Stalk Roll Knife - Tungsten Coated & Heat Treated 8 Per Row
$15.45
Models/Applications: 900 Series, 1000 Series, 943, 944, 963, 964, 983, 984, 1043, 1044, 1063,1064,1083,1084
Replaces: 1327126C1
H150690-N -- Stalk Roll Knife - RH 90 Series Marked Side B
$169.00
Description: Stalk Roll Knife - RH 90 Series Marked Side B
Fitments: 693, 893, 1293, 694, 894, 1294
OEM Reference Number: H150690, H148562
OEM Brand: John Deere®
H150691-N -- Stalk Roll Knife - LH 90 Series Marked Side A
$169.00
Description: Stalk Roll Knife - LH 90 Series Marked Side A
Fitments: 693, 893, 1293, 694, 894, 1294
OEM Reference Number: H150691, H148563
OEM Brand: John Deere®
AH143881BK -- Stalk Roll Barrel Bearing & Seal Kit
$36.90
Models/Applications: 40 Series, 90 Series, 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294
Replaces: AH143881BK
1327209C1-N -- Stalk Roll Auger & Shaft Assy - RH W/Bearing
$142.86
Models/Applications: 1000 Series, 1063, 1083, 1064, 1084
Replaces: 1327209C1
