322341A1-N -- Left Auger Back Sheet - 6 Row 30''
$97.69
Models/Applications:900 Series, 1000 Series, 963, 1063
Replaces:322341A1
W10000015A -- John Deere Wedge with PTO Shafts Hex Clamp 21-Spl Couple
$1,500.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244
OEM Brand: JD
Part Features: This wedge kit helps provide a more optimal operating level to your corn head by flattening it out
Kit Includes: Wedge kit with PTO shafts
Warning: Not applicable to heads mounting on 'Side Hill' combines
Installation Instructions: This wedge kit mounts on the base of the feeder house section of the corn head using bolts. Minimal, to no, fabrication required. Installation instructions to be provided upon delivery of this kit.
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!
H85252-G -- JD Sprocket Hex 8 Tooth Upper Drive Gear (Heat Treated)
$16.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294
OEM Brand: JD
Reference Number(s): H85252
Part Features: Heat Treated
Other Notes: For use on JD 40 & 90 series corn heads - 2 per row
Finish: Paint Black
H158049-N -- JD HDK Pivot Arm Shaft (OEM Style)
$81.34
Models/Applications:690, 890, 1290, 693, 893, 1293, 694, 894, 1294
Replaces:H158049
AH148769-N -- JD Gathering Hex Drive Shaft - New
$97.50
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294
OEM Brand: JD
Reference Number(s): AH148769
Part Features: Heat treated shaft & gear
Other Notes: For use on JD 40 & 90 series corn heads - 2 per gearbox
AN102006-N -- Input Spur Gear Oil Seal
$7.79
Models/Applications:40 Series, 90 Series, 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294
Replaces: AN102006
87029139-N -- Idler Sprocket Support Arm
$28.50
Models/Applications: 3206, 3208, 3212, 3406, 3408, 3412, 2206, 2208, 2212, 2406, 2408, 2412
Replaces: 87029139
OEM Brand: Case IH® & New Holland®
99801234 -- Idler Sprocket # 80 Chain 12 Tooth - 3/4'' Bearing Hole
$54.50
Models/Applications:690, 693, 694, 890, 893, 894, 1290, 1293, 1294, 606, 608, 612, 616, 618
AH227072BK -- Stalk Roll Knife & Auger Bolt Kit - 1 Used per Row 90 Series
$29.07
Models/Applications: 693, 893, 1293, 694, 894, 1294
OEM Brand: JD
Reference Number(s):
Other Notes: For use on JD 90 series corn heads - 1 kit per row
Finish: Paint Black
1327126C1-N -- Stalk Roll Knife - Tungsten Coated & Heat Treated 8 Per Row
$15.45
Models/Applications: 900 Series, 1000 Series, 943, 944, 963, 964, 983, 984, 1043, 1044, 1063,1064,1083,1084
Replaces: 1327126C1
H150690-N -- Stalk Roll Knife - RH 90 Series Marked Side B
$169.00
Description: Stalk Roll Knife - RH 90 Series Marked Side B
Fitments: 693, 893, 1293, 694, 894, 1294
OEM Reference Number: H150690, H148562
OEM Brand: John Deere®
H150691-N -- Stalk Roll Knife - LH 90 Series Marked Side A
$169.00
Description: Stalk Roll Knife - LH 90 Series Marked Side A
Fitments: 693, 893, 1293, 694, 894, 1294
OEM Reference Number: H150691, H148563
OEM Brand: John Deere®
AH143881BK -- Stalk Roll Barrel Bearing & Seal Kit
$36.90
Models/Applications: 40 Series, 90 Series, 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294
Replaces: AH143881BK
N102023-N -- Slip Clutch Jaw
$37.50
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294, 606, 608, 612, 616, 618
OEM Brand: JD
Reference Number(s): N102023
Material: USA Ductile Iron
Finish: Zinc Plate - Yellow
Proudly Made In The USA!
Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions.
This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season.
Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.
H135198-N -- Slip Clutch Hub 1-1/8''
$135.96
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 493, 693, 893, 1293, 494, 694, 894, 1294
OEM Brand: JD
Reference Number(s): H135198
Material: USA Ductile Iron
Finish: Zinc Plated - Yellow
Proudly Made In The USA!
Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions.
This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season.
Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.
