19901224 -- Gathering Chain Drive Sprocket 6 Tooth
$50.00
Models/Applications: 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294, CLARKE 15" Heads
OEM Brand: JD & Clarke
Reference Number(s):
Part Features: Aids in slowing the row unit gathering chains down
Other Notes: For use on JD 40 and 90 series corn heads - and all CLARKE 15" heads
Material: USA Ductile Iron - Heat Treated
Finish: Powder Coat - Black
Proudly Made In The USA!
HSKK-AA0555A -- Kernel Keeper Kit for CA555 Chains - Single Row
$195.00
Kernel Keeper Kit for CA555 Chains
Kernel Keeper™ is the industry's most economical way to solve your shatter-loss/butt-shelling issues. With patented rails that act as a suspension system for your deck plates absorb the shock and "hold" loose kernels on the plate. From there, brushes mounted on each lug of the gathering chain sweep up any loose kernels into the auger bed.
Showing similar results to the competition while coming in at least $500 LESS per row makes Kernel Keeper™ the best solution to loss and butt-shelling.
Sold by the row. Each kit contains 2 rails, brushes for 2 chains, and necessary installation hardware.
Models/Applications: Deere (40 & 90 Series), Case-IH (800, 900, & 1000) Series, New Holland (974, 996, 96C, 98C, 98D, through 2010 Corn Heads, 996) Clarke (All NON-15" corn heads)
FAQ's:
1. How much to break even?
Beta testing has shown Kernel Keeperâ„¢ can pay for itself by saving JUST 2 kernels per 6 square feet. That's ONLY 1/3 of a bushel per acre.
2. How long do they last?
A. Testing has shown a life greater than 150 acres per row
B. Example of total life: 6 Row = 900 Acres, 8 Row = 1200 Acres, 12 Row = 1800 Acres
3. "Sounds fancy, but during a normal year how much money do I save?
A. Using corn prices of $5.00 per bushel, a 6-row corn head, and a savings of just ONE bushel per acre, you will NET $3,330 (or $555/row) over the life of the product. For the mathematically inclined, that's a net return of 285%!
4. Why plastic rails?
Well...technically it's Ultra High Molecular Weight Polyethylene. This material has a proven track record in abrasive wear situations. Additionally, it provides a much softer landing for the ear, allowing for the transfer of energy to the dampening pocket.
5. Why is the rail offset from the deck plates?
The stalk-facing edge of the deck plate is often hard-faced with weld. By offsetting the Kernel Keeper™ edge, the majority of the wear is still against the hardened deck plate, increasing the life of the product.
6. My gathering chain rides tightly on the Kernel Keeper™ rail, will this damage my sprockets and chains?
No, the gathering chain will ride higher on the front sprocket due to the addition of the Kernel Keeper™ rail. This will not affect the life of your chains and sprockets.
7. When do you plan to offer pre-drilled deck plates?
We plan to have pre-drilled deck plates in the near future. When that time comes, we will continue to offer both solutions, allowing the grower to enjoy the benefits of Kernel Keeper™ without HAVING to buy new deck plates.
80991005 - End Deflector Kit - Corn Head
$175.00
End Deflector Kit - Corn Head
*Sold as a single side
*Fits on any model
30-BI-40S-CA-GN -- 30" Bi-Fold Complete Center Assembly - 40 Series (Divider & Snout) - JD Green
$935.00
30" Bi-Fold Complete Center Assembly - 40 Series (Divider & Snout) - JD Green
AH145940-N -- Auger Drive Sprocket - 50 Chain 65 Tooth 1-1/8'' Hex
(Used in Auger Slow Down Kit)
$166.50
Models/Applications:443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 644, 844, 1244
Replaces:
20-BI-40S-LEA-GN -- 20'' Bi-Fold LH End Assembly 40 Series JD Green
$725.00
20'' Bi-Fold LH End Assembly 40 Series JD Green
99771460 -- JD Head to Standard IH Combine Adapter Assembly
$1,250.00
Corn Head Brand: JD
Corn Head Models: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294, 606, 606C, 608, 608C, 612, 612C, 616, 616C, 706, 706C, 708, 708C, 712, 712C, 716, 716C
Combine Brand: IH
Combine Models: 1420, 1440, 1460, 1470, 1480, 1482, 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1682, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388
Installation Notes: This adapter mounts into the feeder house section of the corn head using bolts. Minimal, to no, fabrication required. Installation instructions are provided upon delivery of this kit.
Proudly Made In The USA!
AH83654-N -- Auger Idler Pulley
$17.60
Application:
443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:
AH83654
Description:
Auger Idler Pulley
91262400 -- 1-1/4'' Hex coupler (4-1/2'' long)
$75.60
Models/Applications: 493, 693, 893, 1293, 494, 694, 894, 1294
OEM Brand: JD
Reference Number(s):
Part Notes: 1-1/4" hex coupler 4-1/2" long - use for splicing 1-1/4" hex shafts
Finish: Black Oxide
KIT99991885 -- C/M Knife Roller Kit with Heavy Stalk Roller
(Add 99771883 Timing Tool to order - ...
$995.00
Models/Applications:443, 643, 843, 1243, 444, 644, 844, 1244, 493, 494, 592, 693, 694, 893, 894, 1092, 1290, 1291, 1293
Replaces:
99991885 - CLARKE Knife Roll Upgrade Kit
$800.00
Models/ Applications: 493, 494, 592, 693, 694, 893, 894, 1092, 1290, 1291, 1293, CLARKE
OEM Brand: JD / CLARKE
Part Features: Designed for no-till farmers that require maximum decomposition across a broad range of conditions - this is not a substitute for a "chopping" head
Kit Includes: Cast augers made of USA Ductile Iron, tubes made of USA Steel, knives that are hardened, and tungsten coated, for extra wear, and mounting hardware
Other Notes: Knives are reversible and can be replaced without having to remove the whole roll
Warning: Do not use this part number on JD 40 series corn heads (443, 444, 643, 644, 843, 844, 1243, 1244). You will run a high risk of pinion housing failure. Use part number: KIT99991885 for JD 40 series corn heads.
22-BI-40S-CA-GN -- 22" Bifold Center Assembly Complete - JD Green - 40 Series
$725.00
22" Bifold Center Assembly Complete - JD Green - 40 Series
Includes Center Divider and Center Snout
H144850-N -- Tube Guide - JD Hydraulic Deck Plate
$15.50
Models/Applications: 693, 893, 1293, 694, 894, 1294, CLARKE
OEM Brand: JD
Reference Number(s): H144850
Part Features: Protects the hydraulic deck plate tube from being damaged - mounts at the base of the gearbox
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!
30-BI-CA-GN -- 30'' Bi-Fold Center Assembly - JD Green (Without Mounting Brackets)
$795.00
30'' Bi-Fold Center Assembly - JD Green (Without Mounting Brackets)