Case-IH

Models/Applications: 5088, 5130, 5140, 5150, 6088, 6130, 6140, 6150, 7088, 7130, 7140, 7150, 9230 Replaces: 87751634 Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions. This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season. Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.

Models/Applications: 1063 OEM Brand: IH  Part Features: Tracker Kit should only be used on a 1063 Corn Head. PTO-Shaft Included! PTO Drive Shaft: 1-1/8'' Hex Coupler End 1-1/8'' Hex Clamp End (33" - OAL) *If you need a different PTO Drive Shaft please contact us! 

Models/Applications: 1000 Series, 1043, 1044, 1054, 1063, 1064, 1083, 1084, 3206, 3208, 3212, 3406, 3408, 3412  Replaces: 1989222C2

Description: PTO Shaft & Hanger Kit Hex Both Ends Details: 1-1/8" Hex On Both Ends, Includes Bearings Fitments: 800 Series, 900 Series, 1000 Series, 40 Series, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 844, 1244  OEM Brand(s): John Deere®, Case-IH®

This OEM-spec CNH bolt (PN 86615134-N) is a Torx head, M12 × 1.75 × 25 mm, Class 10.9 fastener used across a wide range of Case IH and New Holland equipment. The high-strength 10.9 rating delivers reliable clamping force in high-vibration areas like driveline covers, guards, and general hardware locations. Sold individually. Features Genuine-spec replacement for CNH 86615134 or Z-1225-TX Torx head for secure drive and reduced cam-out Class 10.9 high-strength steel for demanding applications M12 × 1.75 pitch × 25 mm length Common across Case IH & New Holland combines and other equipment Specs Head type: Torx Thread size: M12 × 1.75 Length (under head): 25 mm Strength: Class 10.9 Quantity: 1 bolt Install: Torque to OEM service-manual specs Notes Always match thread size, length, and grade to the original fastener. If replacing multiple bolts in a critical assembly, replace as a full set where recommended.

Description: Center Divider, 30" 2000 & 3000 Series Case IH® Corn Heads (No Metal Frame) Fitments: Case IH® Cornheads - 2206, 2208, 2212, 2406, 2408, 2412, 2606XR, 2608XR, 2612XR, 3206, 3208, 3212, 3406, 3408, 3412, 3416, 3418 OEM Brand: Case-IH® OEM Reference Number: 87028633 MADE IN THE USA!    This 30-inch center divider is engineered for Case IH® 2000 and 3000 Series corn heads, offering superior durability and dependable crop separation during harvest. Built to match OEM specifications, it provides a precise fit and optimal performance on models including 2206, 2208, 2212, 2406, 2408, 2412, 2606XR, 2608XR, 2612XR, 3206, 3208, 3212, 3406, 3408, 3412, 3416, and 3418. Proudly MADE IN THE USA, this divider delivers reliable quality, helping farmers maximize efficiency and reduce downtime in the field.

Models/Applications: 5088, 5130, 5140, 5150, 6088, 6130, 6140, 6150, 7088, 7140, 7150 Replaces: 87726709

Kernel Keeper Kit for CA555 Chains Kernel Keeper™ is the industry's most economical way to solve your shatter-loss/butt-shelling issues. With patented rails that act as a suspension system for your deck plates absorb the shock and "hold" loose kernels on the plate. From there, brushes mounted on each lug of the gathering chain sweep up any loose kernels into the auger bed. Showing similar results to the competition while coming in at least $500 LESS per row makes Kernel Keeper™ the best solution to loss and butt-shelling. Sold by the row. Each kit contains 2 rails, brushes for 2 chains, and necessary installation hardware. Models/Applications: Deere (40 & 90 Series), Case-IH (800, 900, & 1000) Series, New Holland (974, 996, 96C, 98C, 98D, through 2010 Corn Heads, 996) Clarke (All NON-15" corn heads)           FAQ's: 1. How much to break even? Beta testing has shown Kernel Keeperâ„¢ can pay for itself by saving JUST 2 kernels per 6 square feet. That's ONLY 1/3 of a bushel per acre. 2. How long do they last? A. Testing has shown a life greater than 150 acres per row B. Example of total life: 6 Row = 900 Acres, 8 Row = 1200 Acres, 12 Row = 1800 Acres 3. "Sounds fancy, but during a normal year how much money do I save? A. Using corn prices of $5.00 per bushel, a 6-row corn head, and a savings of just ONE bushel per acre, you will NET $3,330 (or $555/row) over the life of the product. For the mathematically inclined, that's a net return of 285%! 4. Why plastic rails? Well...technically it's Ultra High Molecular Weight Polyethylene. This material has a proven track record in abrasive wear situations. Additionally, it provides a much softer landing for the ear, allowing for the transfer of energy to the dampening pocket. 5. Why is the rail offset from the deck plates? The stalk-facing edge of the deck plate is often hard-faced with weld. By offsetting the Kernel Keeper™ edge, the majority of the wear is still against the hardened deck plate, increasing the life of the product. 6. My gathering chain rides tightly on the Kernel Keeper™ rail, will this damage my sprockets and chains? No, the gathering chain will ride higher on the front sprocket due to the addition of the Kernel Keeper™ rail. This will not affect the life of your chains and sprockets. 7. When do you plan to offer pre-drilled deck plates? We plan to have pre-drilled deck plates in the near future. When that time comes, we will continue to offer both solutions, allowing the grower to enjoy the benefits of Kernel Keeper™ without HAVING to buy new deck plates.

Hydraulic Deck Plate Indicator Assembly IH & JD Kit Application: IH / JD Hydraulic Deck Plate Kits

Models/Applications: 2206, 2208, 2212, 2406, 2408, 2412, 3206, 3208, 3212, 3406, 3408, 3412 OEM Brand: IH Reference Number(s): 86837081 Material: Drive sprocket - 7 teeth Other Notes: 2 sprockets required per row

Models/Applications: 2200 Series, 996 Series, Clarke Knife Roll Replaces: 86977538 The 2200 Series Case IH Stalk Roll Knife (Aftermarket - Model 86977538) features an advanced "W-shape" design that excels in both crimping and cutting stalks (every 4-6"). This unique shape not only ensures precise slicing but also effectively crimps the stalks, causing them to lay down where they're cut. This reduces the risk of stalks blowing around the field and down the road, which can be a common issue with less effective residue management. By creating a more "stable" residue, this knife is especially beneficial for no-till farmers, as it promotes a more nutritious and manageable field environment and prepares the soil for optimal planting conditions. Durable and reliable, the 2200 Series Stalk Roll Knife by VH Mfg (Polytin) is essential for enhancing harvesting performance and supporting effective residue management strategies.

Models/Applications: 800 Series, 900 Series, 1000, 843, 844, 863, 864, 883, 884, 943, 944, 963, 964, 983, 984, 1043, 1044, 1063, 1064, 1083, 1084, 443, 444, 643, 644, 843, 844, 1243, 1244  Replaces: 199097C3

Models/Applications:900 Series, 1000 Series, 943, 963, 983, 1043, 1063, 1064, 1083, 1084 

CNH 86512497-N is a hex flange nut (M12 × 1.75, 12 mm height) used across Case IH and New Holland equipment. The integrated flange acts like a built-in washer to spread load and resist loosening in high-vibration assemblies.  Features Genuine-spec replacement for CNH 86512497 Hex flange design distributes clamping load and reduces surface damage Metric thread: M12 × 1.75 (standard pitch) Specs Part number: 86512497 Type: Hex flange nut Thread: M12 × 1.75 Overall height: 12 mm Quantity: 1 nut (each) 

Corn Head Brand: IH Corn Head Models: 2206, 2208, 2212 Combine Brand: IH Combine Models: 7010, 8010, 7120, 8120, 9120, 7230, 8230, 9230, 7240, 8240, 9240 Installation Notes: This adapter mounts into the feeder house section of the corn head. The bottom wedge bolts on using the existing holes. The top wedge plates will require you to drill, and tap, holes to secure those wedge plates into place. Installation instructions are provided upon the delivery of this kit.  Proudly Made In The USA!