Test

The LANAUG702K is an unloading auger extension kit for John Deere® 50 Series and older combines (model numbers 6620 to 9750). It also fits any CTS combine. This kit extends the length of the factory unloading auger by 3'. The LANAUG702K is not for use with John Deere® 60, 70, or S Series High Unloading Rate (HUR) augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 60, 70, & "S" Series combines with 17" High Unloading Rate auger (HUR), order the LANAUGHURK For Case IH® combine augers, order the LANAUGCIHK Installation Instructions

The LANAUG1135K is an unloading auger extension kit for John Deere® 60, 70, & "S" Series combines with 13.5" standard augers (non-HUR). The LANAUG1135K will extend the reach of your factory auger by 42". This kit mounts easily to the existing auger with nuts and bolts, and does not require any welding or drilling. DO NOT use with export version horizontal unloading auger housings (John Deere® PN: ST363451) Do not use on folding augers For John Deere® 60, 70, & "S" Series combines with 17" High Unloading Rate auger (HUR), order the LANAUGHURK For John Deere® 50 Series and older combines, order the LANAUG702K Installation Instructions

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD4000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD4000K fits John Deere® combine models 00, 10,and all 50 Series Walker combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 HUR = High Unload Rate Recommended Seasonal Maintenance Video

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD3000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD3000K fits John Deere® NON-HUR combine models 60 - S770, and all 50 Series STS combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2   Recommended Seasonal Maintenance

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD2000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD2000K fits John Deere® combine models S680, S780, S690, & S790. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 *HUR= High Unload Rate   Lankota Seasonal Recommended Maintenance Video

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD1000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD1000K fits John Deere® HUR combine models 9560 - S770. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2   Recommended Seasonal Maintenance

Extend the reach of your John Deere® 60, 70, and S Series combines with the LANAUGHURK. Designed for 17" High Unloading Rate (HUR) augers, this bolt-on extension adds 48" without the need for welding or drilling. Ideal for non-folding augers, it enhances functionality and efficiency. Note: Not compatible with X9 series combines or factory 28.5' augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 50 Series and older combines, order the LANAUG702K Installation Instructions *Plan roughly 4 hours for installation of this kit Weight & Dimensions: 215 lbs; 52"x48"x27".

Product Name: Heavy-Duty Plow Bolt with Nut (Grade 8, Dome Head) Description: This individual 3/4" x 2.5" Grade 8 dome head bolt with a matching nut is engineered for superior performance in heavy-duty applications. Ideal for securing cutting edges on equipment like skid steers and backhoes, it provides durability and reliability under demanding conditions. Perfect for replacing worn or damaged hardware. Replaces: T70286 Applications: 333P, 333G, 335P, 450P, 450G, 450H, 450J, 450K, 455G, 550, 550P, 550G, 550H, 550J, 550K, 555G, 620P, 620G, 622P, 622G, 640L, 640L-II, 648L, 648L-II, 650P, 650G, 650H, 650J, 650K, 670P, 670D, 670G, 672P, 672D, 672G, 700H, 700J, 700J-II, 700K, 700L, 724K, 748L, 748L-II, 750C, 750J, 750J-II, 750K, 750L, 762B, 764, 768L-II, 770P, 770D, 770G, 772P, 772D, 772G, 848L, 848L-II, 850C, 850J, 850J-II, 850JR, 850K, 850L, 862B, 870D, 870G, 872D, 872G, 948L, 948L-II

Sprocket Assembly for CNH Cornheads (Single Double) Models/Applications:  Case IH® Cornheads - 240630, 240636, 240638, 240670, 240822, 240830, 240836, 240838, 240870, 241220, 241222, 241230 New Holland® Cornheads - 98C630, 98C636, 98C822, 98C830, 98C836, 98C1220, 98C1222, 98C1230 Replaces: 87283939

Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C16R, C18R OEM Brand: JD Reference Number(s): 83758 Part Notes: This part will cover, and replace, aftermarket poly patches. Stainless steel, these patches will not allow the screws to pull through the part while chaff builds up behind it. Kit includes screws to mount the wear strip.  Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it. Get it free of any debris. Take some silicone and put about 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.  Material: USA Stainless Steel PROUDLY MADE IN THE USA! Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions. This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season. Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.

PTO Drive Shaft - Contour Master to fit John Deere Header requires 2 drivelines per head *PTO Shafts are priced individually Models/Applications: 492, 493, 494, 592, 594, 692, 693, 694, 892, 893, 894, 1092, 1290, 1291, 1293, 900D, 900F, 900P, 900R, 913, 915, 918, 920, 922, 924, 925, 930, 930F Replaces: AH220096

Stalk Roll, Right Hand for JD 600 Series Cornhead, HXE41141 Models/Applications: 606 (ASN 740312), 606C (BSN 745100), 608 (ASN 740474), 608C (BSN 745100), 608FC (ASN 129189), 612 (ASN 740750), 612C (BSN 745100), 612FC, 616, 616C, 618, 618C, 706C, 708C, 708FC, 712C, 712FC, 716C, 718C Replaces: HXE41142 Enhance your harvesting efficiency with the New Aftermarket Opposing Stalk Rolls, which are expertly designed for superior crop residue processing. This high-performance Stalk Roll features a knife roll that shreds stalks and residue into a confetti-like form, ensuring finer and more manageable crop residue. Constructed for durability, it effectively handles and processes corn and other crops, minimizing the need for further fieldwork. Its robust build is ideal for harsh field conditions, making it a reliable choice for main

Stalk Roll, Left Hand for JD 600 Series Cornhead, HXE41141 Models/Applications: 606 (ASN 740312), 606C (BSN 745100), 608 (ASN 740474), 608C (BSN 745100), 608FC (ASN 129189), 612 (ASN 740750), 612C (BSN 745100), 612FC, 616, 616C, 618, 618C, 706C, 708C, 708FC, 712C, 712FC, 716C, 718C Replaces: HXE41141 Enhance your harvesting efficiency with the New Aftermarket Opposing Stalk Rolls, which are expertly designed for superior crop residue processing. This high-performance Stalk Roll features a knife roll that shreds stalks and residue into a confetti-like form, ensuring finer and more manageable crop residue. Constructed for durability, it effectively handles and processes corn and other crops, minimizing the need for further fieldwork. Its robust build is ideal for harsh field conditions, making it a reliable choice for maintaining optimal performance for your corn head.

Rubber Divider Shield, JD 600 Series Models/Applications: 606, 606C, 608, 608C, 612, 612C (BSN 745100) Replaces: H22744 Extend the Life of Your Corn Head Dividers with Rubber Shields Enhance the durability of your plastic corn head dividers with our high-quality rubber shields. Designed to fit seamlessly over your existing dividers, these rubber shields provide a robust protective layer that significantly extends their lifespan. Key Benefits: Durable Protection: Rubber shields absorb impact and reduce wear, shielding your plastic dividers from damage caused by harsh field conditions and constant use. Extended Lifespan: By minimizing direct contact with abrasive elements, these shields prevent premature degradation, ensuring your dividers last longer and perform optimally. Easy Installation: Our rubber shields are designed for a perfect fit, making installation quick and hassle-free without the need for specialized tools. Cost-Effective Solution: Protecting your investment with rubber shields can help you avoid costly replacements and repairs, offering a budget-friendly way to maintain your equipment. Upgrade your corn head dividers with rubber shields and keep your equipment running smoothly season after season.

CNH Corn Head Gathering Chain Models/Applications:  Case IH®Cornheads 2011 and Later ASN HAJ0003469 - 2206, 2208, 2212 Cornheads 2011 and Later - 240630, 240636, 240638, 240670, 240822, 240830, 240836, 240838, 240870, 241220, 241222, 241230, 320630, 320636, 320638, 320670, 320822, 320830, 320836, 320838, 320870, 321220, 321222, 321230, 340630, 340636, 340638, 340670, 340822, 340830, 340836, 340838, 340870, 341220, 341222, 341230, 341630, 341820 New Holland®Cornheads 2011 and Later - 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 96C1220, 96C1222, 96C1230, 98D0630, 98D0636, 98D0822, 98D0830, 98D0836, 98D1220, 98D1222, 98D1230, 98D1630, 98D1820