Test

Center Auger Floor Pan, 115.375''Â - JD 40 Series Models/Applications: 443 Early, 643, 644, 843, 1243 Replaces:Â H146025

Models/Applications: 5088, 5130, 5140, 5150, 6088, 6130, 6140, 6150, 7088, 7130, 7140, 7150, 9230 Replaces: 87751634

Models/Applications: 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294, 1043, 1063, 1083, 1044, 1064, 1084 OEM Brand: JD, IH, NH Reference Number(s):  Part Notes: 1-1/8" hex coupler 4-1/2" long - use for splicing 1-1/8" hex shafts Finish: Black Oxide

Models/Applications:443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 644, 844, 1244 Replaces:

LH Auger Floor Pan, 115.25'' - 1293 SN (695756-  ) Models/Applications: 1293 Replaces: H179210

RH Auger Floor Pan, 118.13'' - 1293 SN (695756-  ) Models/Applications: 1293 Replaces: H179209

Center Auger Floor Pan, 115'' - 90 Series SN (695756-  ) Models/Applications: 693, 893, 1293 Replaces: H179193

Models/Applications:200 Series, 900 Series, 200, 900F, 900R Replaces:H205318

The LANAUG702K is an unloading auger extension kit for John Deere® 50 Series and older combines (model numbers 6620 to 9750). It also fits any CTS combine. This kit extends the length of the factory unloading auger by 3'. The LANAUG702K is not for use with John Deere® 60, 70, or S Series High Unloading Rate (HUR) augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 60, 70, & "S" Series combines with 17" High Unloading Rate auger (HUR), order the LANAUGHURK For Case IH® combine augers, order the LANAUGCIHK Installation Instructions

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD4000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD4000K fits John Deere® combine models 00, 10,and all 50 Series Walker combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 HUR = High Unload Rate Recommended Seasonal Maintenance Video

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD3000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD3000K fits John Deere® NON-HUR combine models 60 - S770, and all 50 Series STS combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2   Recommended Seasonal Maintenance

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD2000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD2000K fits John Deere® combine models S680, S780, S690, & S790. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 *HUR= High Unload Rate   Lankota Seasonal Recommended Maintenance Video

Extend the reach of your John Deere® 60, 70, and S Series combines with the LANAUGHURK. Designed for 17" High Unloading Rate (HUR) augers, this bolt-on extension adds 48" without the need for welding or drilling. Ideal for non-folding augers, it enhances functionality and efficiency. Note: Not compatible with X9 series combines or factory 28.5' augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 50 Series and older combines, order the LANAUG702K Installation Instructions *Plan roughly 4 hours for installation of this kit Weight & Dimensions: 215 lbs; 52"x48"x27".

H232305-N -- JD Auger Hanger Chain Adjustment Bracket Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 616C - SN ( -745100) Replaces: H232305

Models/Applications: 5088, 5130, 5140, 5150, 6088, 6130, 6140, 6150, 7088, 7140, 7150 Replaces: 87726709