
AH103303-N -- Idler Sprocket - Gathering Chain 11 Tooth
$22.61
Models/Applications:50A Series, 653A, 853A, 1253A
Replaces:AH103303

KXE10487-N -- Gathering Chain Kit - 700 Series Row Max
$451.75
Gathering Chain Kit - 700 Series Row Max
Replaces:
KXE10487
Models:
606, 608, 612, 616, 618, 612F, 706C, 708C, 712C, 718C

KIT99991885 -- C/M Knife Roller Kit with Heavy Stalk Roller
(Add 99771883 Timing Tool to order - ...
$995.00
Models/Applications:443, 643, 843, 1243, 444, 644, 844, 1244, 493, 494, 592, 693, 694, 893, 894, 1092, 1290, 1291, 1293
Replaces:

H154270-N -- Right Hand Deck Plate - Hard Surfaced Edge
$38.25
Models/Applications: 693,893,1293,694,894,1294
OEM Brand: JD
Reference Number(s): H154270
Part Features: Hard surfaced edge for prolonged wear, stationary/manual adjust deck plate
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!

08H4219-N -- Idler Tension Spring Bolt
$4.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294, 606, 606C, 608, 608C, 612, 612C, 616, 616C, 618, 618C, 706, 706C, 708, 708C, 712, 712F, 712C, 716, 716C, 718, 718C, C6R, C8R, C12R, C12F, C16R, C16F, C18R
OEM Brand: JD
Reference Number(s): 08H4219
Part Features: Bolt used to tension the gathering chain

AN102448-N -- Idler Sprocket - Non-Greaseable
$14.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 1244, 2206, 2208, 2212, 3206, 3208, 3212, 3406, 3408, 3412, 974, 493, 494, 693, 694, 893, 894, 1293, 1294
OEM Brand: IH, JD, NH
Reference Number(s): AN102448, 587300, 745023, 745023, 176283C91, 84549635, 86583947, 87034967
Material: Non-greaseable idler sprocket - 8 teeth - CA555 Chain
Other Notes: 2 idler sprockets required per row

H149666-N -- Gathering Chain Drive Shaft - Left Hand SN(655100- )
$51.98
Models/Applications:50A Series, 653A, 853A, 1253A
Replaces:H149666


AN102009-N -- Gathering Chain - HARDENED Pins
$37.00
Application/Models: 243, 244, 343, 344, 443, 444, 493, 494, 543, 546, 594, 642, 643, 644, 645, 692, 693, 694, 842, 843, 844, 892, 893, 894, 243, 1290, 1291, 1294, 544
OEM Brand: JD
Application/Models: 1043, 1044, 1054, 1063, 1064, 1083, 1084, 2206, 2208, 2212, 800, 823, 824, 833, 834, 843, 844, 853, 854, 863, 864, 873
OEM Brand: IH
Application/Models: 96C1220, 96C1222, 96C1230, 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 974, 98C1220, 98C1222, 98C1230, 996N6
OEM Brand: FRD / NH
Reference Number(s): AN102009, 113399rR91, 176279C91, AH91367, AH229064, 2221-32821, B1SB251, 176279C91, 251-E, 1306953C91, 610831, , 1133997R1
Part Features: Hardened pins for extended wear

N102036-N -- Row Unit Slip Clutch Hub 1-1/8'' Hex
$114.70
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294
OEM Brand: JD
Reference Number(s): N102036
Material: USA Ductile Iron
Finish: Zinc Plate - Yellow
Proudly Made In The USA!

AH117558-N -- Sprocket - Gathering Chain 12 Tooth without Flange Spacer
$18.75
Models/Applications:50 Series, 50A Series, 653, 853, 1253, 653A, 853A, 1253A
Replaces:AH117552

AH101340-N -- Gathering Drive Sprocket 11 & 12 Teeth Spline Bore
$63.80
Models/Applications:50A Series, 653A, 853A
Replaces:AH101340

AH101339-N -- Gathering Drive Sprocket - 11 Tooth Spline Bore
$35.80
Models/Applications:50A Series, 653A, 853A
Replaces:AH101339


LANSS24608 -- Complete Stalk Stomper® kit (1 row) with poly for Case® 4400 Series & like model Ne...
$446.25
The LANSS24608 is a complete Stalk Stomper® mount, hardware and shoe with poly kit for ONE row. This kit will fit Case® 4400 Series & like model New Holland® corn heads. The Stalk Stomper® poly liner is 1/4" thick and held to the main shoe with carriage bolts. No tools required to remove shoe from mount if needed.
For 4412 30" corn heads, also order (1) LANSS4613 kit for use with rows 1 & 12.
Installation Instructions

LANSS14512 -- Complete Stalk Stomper® kit (1 row) with Poly for 2011 and older John Deere® 600 Se...
$446.25
The LANSS14512 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2011 and older John Deere® 600 Series corn heads. This kit will fit any John Deere® factory 600 Series corn head, 2011 and older, accommodating all spacing configurations. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS21451) are interchangeable with John Deere® original shoe and mount.
Lankota's LANSS21466 jack stand kit is recommended, but not required.
Installation Instructions

LANSS231 -- Generation 3 Stalk Stomper® with poly assembly
$287.00
The LANSS231 is Lankota's Generation 3 Stalk Stomper® with poly assembly. The LANSS231 is interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). This Stalk Stomper® is included in the LANSS11362 & LANSS14512 kits.
Lankota's LANSS21466 jack stand is recommended, but not required.