New Holland

Models/Applications: Case IH: 3206, 3208, 3212, 3406, 3408, 3412, 3416, 3418 New Holland: 98D (with knife rolls) OEM Brand: Case IH / New Holland Part Notes: Right-hand stalk roll shaft assembly includes shaft, cast spiral point, water pump bearing, and steel shield. Designed for smooth crop feeding, efficient stalk processing, and long service life. Material: High-strength, precision-machined steel with cast spiral point and durable steel shielding PROUDLY MADE TO OEM SPECIFICATIONS

Application/Models: 243, 244, 343, 344, 443, 444, 493, 494, 543, 546, 594, 642, 643, 644, 645, 692, 693, 694, 842, 843, 844, 892, 893, 894, 243, 1290, 1291, 1294, 544 OEM Brand: JD  Application/Models: 1043, 1044, 1054, 1063, 1064, 1083, 1084, 2206, 2208, 2212, 800, 823, 824, 833, 834, 843, 844, 853, 854, 863, 864, 873 OEM Brand: IH Application/Models: 96C1220, 96C1222, 96C1230, 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 974, 98C1220, 98C1222, 98C1230, 996N6 OEM Brand: FRD / NH Reference Number(s): AN102009, 113399rR91, 176279C91, AH91367, AH229064, 2221-32821, B1SB251, 176279C91, 251-E, 1306953C91, 610831, , 1133997R1 About This Part: This 6-lug gathering chain was designed to help deal with the ever lingering problem of pulling too much trash into the corn head, and thus the feeder house of the combine. These chains can decrease the trash coming into the corn head by upwards of 40%! By operating with 6-lugs, rather than the normal 8-lugs, we are able to increase the window between lugs by 25%. Giving the stalk rolls more time to do their job - suck the trash down. This 6-lug chain acts similarly to a slow-down kit, but rather than having to the drive sprockets, idler sprockets, and chains - a farmer can get by with just purchasing chains. Thus offering a more cost-effective way to decrease trash - and increase yield. These chains are the best "bang for your buck" on the market AND they are CHROME pinned, offering a longer life than most other aftermarket chains!

Application/Models: 243, 244, 343, 344, 443, 444, 493, 494, 543, 546, 594, 642, 643, 644, 645, 692, 693, 694, 842, 843, 844, 892, 893, 894, 243, 1290, 1291, 1294, 544 OEM Brand: JD  Application/Models: 1043, 1044, 1054, 1063, 1064, 1083, 1084, 2206, 2208, 2212, 800, 823, 824, 833, 834, 843, 844, 853, 854, 863, 864, 873 OEM Brand: IH Application/Models: 96C1220, 96C1222, 96C1230, 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 974, 98C1220, 98C1222, 98C1230, 996N6 OEM Brand: FRD / NH Reference Number(s): AN102009, 113399rR91, 176279C91, AH91367, AH229064, 2221-32821, B1SB251, 176279C91, 251-E, 1306953C91, 610831, , 1133997R1 Part Features: Hardened pins for extended wear

AH136671-N — 48-Link, 8-Lug Gathering Chain – Chrome Pins Description: Chrome-pin gathering chain for John Deere 40 and 90 Series corn heads and compatible Case IH® and New Holland® corn heads using the same CA555 eight-lug chain configuration. This gathering chain works as part of a pair to pull stalks and ears rearward through the row unit and into the corn head. Chrome pins provide a harder wear surface at the pin-and-bushing joint, helping reduce chain elongation and extend service life in abrasive harvest conditions. Models/Applications: John Deere®:40 Series and 90 Series corn heads, including 243, 343, 443, 493, 543, 643, 693, 843, 893, 1243, and 1293 models and their corresponding row-spacing configurations using OEM part number AH136671. Case IH®:2200, 2400, 3200, and 3400 Series corn heads through model year 2010, including 2206, 2208, and 2212. Also fits select earlier 800 and 1000 Series applications using the same CA555 eight-lug gathering chain. New Holland®:Select 974, 996, 96C, 98C, and 98D corn heads through model year 2010 using the same eight-lug chain configuration. OEM Brand:John Deere® / Case IH® / New Holland® Reference Number(s):AH136671, 86978515 Part Features: CA555 endless gathering chain 48 links 8 gathering lugs Chrome pins for increased wear resistance Sold individually Two gathering chains required per row Fitment Note: This is the eight-lug chain configuration. Case IH® and New Holland® corn heads manufactured in 2011 and later may use the six-lug gathering chain that replaces OEM part number 84284709. On Case IH® 2206, 2208, and 2212 heads, verify the serial-number break at HAJ0003469 or confirm the existing OEM part number before ordering. Service Tip: When installing new gathering chains, inspect the drive and idler sprockets for hooked, pointed, or unevenly worn teeth. Worn sprockets can accelerate wear on a new chain. For consistent feeding and adjustment, replace both gathering chains on the row together and set chain tension and lug timing according to the equipment manufacturer’s instructions.

Models/Applications:974 Replaces:

Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 1244, 2206, 2208, 2212, 3206, 3208, 3212, 3406, 3408, 3412, 974, 493, 494, 693, 694, 893, 894, 1293, 1294 OEM Brand: IH, JD, NH Reference Number(s): AN102448, 587300, 745023, 745023, 176283C91, 84549635, 86583947, 87034967 Material: Non-greaseable idler sprocket - 8 teeth - CA555 Chain Other Notes: 2 idler sprockets required per row

Description: Center Snout 30'' 2000 & 3000 Series Case IH® (Without Metal Frame) Fitments: Case IH® Cornheads - 2206, 2208, 2212, 2406, 2408, 2412, 2606XR, 2608XF, 2608XR, 2612XR, 3206, 3208, 3212, 3406, 3408, 3412, 3416, 3418 OEM Brand: Case-IH® OEM Reference Number: 86980207 MADE IN AMERICA!    This high-quality 30-inch center snout is designed for Case IH® 2000 and 3000 Series corn heads, providing reliable crop flow and durability in the field. Built to exact OEM specifications, it ensures a precise fit and long-lasting performance on models including 2206, 2208, 2212, 2406, 2408, 2412, 2606XR, 2608XF, 2608XR, 2612XR, 3206, 3208, 3212, 3406, 3408, 3412, 3416, and 3418. Proudly MADE IN AMERICA, this snout delivers the rugged strength and dependability farmers expect during the toughest harvest conditions.

Description: Combine Stalk Chopper Blade fits Case IH Details:  Replaces Case-IH part numbers 47818715, 84340041, 84976065 Heat Treated Tungsten Carbide Other Parts You May Need: Bolt: (84972753), Bushing: (322630350), Nut and washer Fitments:  Case-IH® 2606, 2608, 2612, 4206, 4208, 4406, 4408, 4412, 4416, 4418, 4408F, 4412F  New Holland® 99C, 980CF, 980CR OEM Brand: Case IH®, New Holland® OEM Reference Number(s): 47818715,84340041, 84976065

Models/Applications: Case IH: 3206, 3208, 3212, 3406, 3408, 3412, 3416, 3418 New Holland: 98D (with knife rolls) OEM Brand: Case IH / New Holland Part Notes: Left-hand stalk roll shaft assembly includes shaft, cast spiral point, water pump bearing, and steel shield. Designed for smooth crop feeding, efficient stalk processing, and long service life. Material: High-strength, precision-machined steel with cast spiral point and durable steel shielding PROUDLY MADE TO OEM SPECIFICATIONS

Models/Applications: 3206, 3208, 3212, 3406, 3408, 3412, 2206, 2208, 2212, 2406, 2408, 2412  Replaces: 87029139 OEM Brand: Case IH® & New Holland®

Models/Applications:,TR89,TR97 SN(555803),TR98,TR99,TX36 Replaces:86562752

Models/Applications:, AFX8010, 7010, 7120, 8010, 8120, 9120, CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080, CX8090 Replaces:84814042

Description: New Holland 30'' Center Snout (Poly Only)  Fitments: 96C, 98C, 98D, 996,99C OEM Brand: New Holland® OEM Reference Number(s): 86608636, 86978707 MADE IN THE USA! This 30" New Holland® Center Snout (Poly Only) is a direct-fit replacement for select New Holland corn heads. Manufactured from durable, impact-resistant polyethylene, it’s designed to withstand harsh field conditions while providing smooth crop flow and long service life. Proudly Made in the USA, this snout delivers reliable performance and OEM-level fit and finish.