H154270-N -- Right Hand Deck Plate - Hard Surfaced Edge
$38.25
Models/Applications: 693,893,1293,694,894,1294
OEM Brand: JD
Reference Number(s): H154270
Part Features: Hard surfaced edge for prolonged wear, stationary/manual adjust deck plate
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!
AH129357-N -- Clean Grain Elevator Boot Door - 25-5/8" x 7-1/8"
$63.70
Models/Applications:9400 Series, 9500 Series, 9400, 9410, 9500, 9500SH, 9510, 9510SH
Replaces:AH129357
AH101340-N -- Gathering Drive Sprocket 11 & 12 Teeth Spline Bore
$63.80
Models/Applications:50A Series, 653A, 853A
Replaces:AH101340
AH101339-N -- Gathering Drive Sprocket - 11 Tooth Spline Bore
$35.80
Models/Applications:50A Series, 653A, 853A
Replaces:AH101339
H149666-N -- Gathering Chain Drive Shaft - Left Hand SN(655100- )
$51.98
Models/Applications:50A Series, 653A, 853A, 1253A
Replaces:H149666
AN102009-N -- Gathering Chain - HARDENED Pins
$37.00
Application/Models: 243, 244, 343, 344, 443, 444, 493, 494, 543, 546, 594, 642, 643, 644, 645, 692, 693, 694, 842, 843, 844, 892, 893, 894, 243, 1290, 1291, 1294, 544
OEM Brand: JD
Application/Models: 1043, 1044, 1054, 1063, 1064, 1083, 1084, 2206, 2208, 2212, 800, 823, 824, 833, 834, 843, 844, 853, 854, 863, 864, 873
OEM Brand: IH
Application/Models: 96C1220, 96C1222, 96C1230, 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 974, 98C1220, 98C1222, 98C1230, 996N6
OEM Brand: FRD / NH
Reference Number(s): AN102009, 113399rR91, 176279C91, AH91367, AH229064, 2221-32821, B1SB251, 176279C91, 251-E, 1306953C91, 610831, , 1133997R1
Part Features: Hardened pins for extended wear
H205318-N -- Poly Retractable Auger Finger 200 & 900 Series
$6.50
Models/Applications:200 Series, 900 Series, 200, 900F, 900R
Replaces:H205318
AH117558-N -- Sprocket - Gathering Chain 12 Tooth without Flange Spacer
$18.75
Models/Applications:50 Series, 50A Series, 653, 853, 1253, 653A, 853A, 1253A
Replaces:AH117552
AH146577-N -- Poly Snout - 30'' Replacement 90 Series SN( -695300)
$235.00
Models/Applications: 493, 693, 893, 1293
OEM Brand: JD
Reference Number(s): AH146577
Material: Poly
Other Notes: For use on JD 90 series early model serial number corn heads SN( -695301)
Finish: OEM Green
Proudly Made In The USA!
LANSS21466 -- Double Jack Stand Kit for John Deere® 600 & 700 Series corn heads
$634.25
The LANSS21466 is a double jack stand kit for John Deere® 600, 700, & C Series corn heads. This kit is recommended for any John Deere® 600, 700, & C Series corn heads equipped with Lankota Generation 3 Stalk Stompers® OR John Deere® OEM Stalk Deflectors. This stand kit will reduce excessive Stalk Stomper/Deflector spring tension during long periods of header storage. No drilling, cutting or welding required.
Installation Instructions
LANSS14512 -- Complete Stalk Stomper® kit (1 row) with Poly for 2011 and older John Deere® 600 Se...
$446.25
The LANSS14512 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2011 and older John Deere® 600 Series corn heads. This kit will fit any John Deere® factory 600 Series corn head, 2011 and older, accommodating all spacing configurations. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS21451) are interchangeable with John Deere® original shoe and mount.
Lankota's LANSS21466 jack stand kit is recommended, but not required.
Installation Instructions
LANSS231 -- Generation 3 Stalk Stomper® with poly assembly
$287.00
The LANSS231 is Lankota's Generation 3 Stalk Stomper® with poly assembly. The LANSS231 is interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). This Stalk Stomper® is included in the LANSS11362 & LANSS14512 kits.
Lankota's LANSS21466 jack stand is recommended, but not required.
LANSS11362 -- Complete Stalk Stomper® kit (1 row) with Poly for 2012+ John Deere® corn heads
$446.25
The LANSS11362 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2012+ John Deere® corn heads. This kit will fit any John Deere® factory corn head from 2012 and newer, including all spacing configurations of 600, 700 & C Series corn heads. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS86614) are interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362).
Lankota's LANSS21466 jack stand kit is recommended, but not required.
Installation Instructions
LANAUG702K -- Unloading auger extension kit with grain saver door
$1,018.50
The LANAUG702K is an unloading auger extension kit for John Deere® 50 Series and older combines (model numbers 6620 to 9750). It also fits any CTS combine. This kit extends the length of the factory unloading auger by 3'.
The LANAUG702K is not for use with John Deere® 60, 70, or S Series High Unloading Rate (HUR) augers.
For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K
For John Deere® 60, 70, & "S" Series combines with 17" High Unloading Rate auger (HUR), order the LANAUGHURK
For Case IH® combine augers, order the LANAUGCIHK
Installation Instructions
LANAUG1135K -- Unloading auger extension for John Deere® 60, 70, & S Series augers (NON-HUR)
$1,315.50
The LANAUG1135K is an unloading auger extension kit for John Deere® 60, 70, & "S" Series combines with 13.5" standard augers (non-HUR). The LANAUG1135K will extend the reach of your factory auger by 42". This kit mounts easily to the existing auger with nuts and bolts, and does not require any welding or drilling.
DO NOT use with export version horizontal unloading auger housings (John Deere® PN: ST363451)
Do not use on folding augers
For John Deere® 60, 70, & "S" Series combines with 17" High Unloading Rate auger (HUR), order the LANAUGHURK
For John Deere® 50 Series and older combines, order the LANAUG702K
Installation Instructions
