AH151632-N -- Floor Sheet - Right 75-5/16" Stainless Steel
$300.00
Models/Applications: 900 Series, 913F, 915F, 918F, 922F
Replaces: AH151632
Measurements: Right 75-5/16" Stainless Steel
OEM Brand: JD
AH151635-N -- Floor Sheet - Left 78-7/16" Stainless Steel
$315.00
Models/Applications:900 Series, 924F, 925F, 930F
Replaces: AH151635
Measurements: Left 78-7/16" Stainless Steel
OEM Brand: JD
AH151633-N -- Floor Sheet - Left 75-5/16" Stainless Steel
$290.00
Models/Applications:900 Series, 913F, 915F, 918F, 922F
Replaces:AH151633
AH151628-N -- Floor Sheet - Center 40-7/16" Stainless Steel
$165.00
Models/Applications:900 Series, 922F, 930F
Replaces:AH151628
H157112-N -- Feeder House Wear Plate - Machines with Contour Master
$105.00
Models/Applications:9600 Series, 9700 Series, 9650STS, 9750STS
Replaces:H157112
H173904-N -- Feeder House Seal
$67.00
Models/Applications:9400 Series, 9500 Series, 9600 Series, 9700 Series, 9400, 9410, 9450, 9500, 9510, 9510SH, 9550, 9550SH, 9650, 9650SSTS, 9750STS
Replaces:H173904
AH156157-N -- Feeder House Rock Trap Plate
$250.00
Models/Applications:9650STS, 9660STS, 9670STS, 9770STS, 9870STS, 9880iSTS, S650, S660, S670, S680, S690
Replaces:AH156157
H98558-V -- Feeder House Drum Shaft - JD 64.250"
$75.00
Models/Applications:88, 208, 820
Replaces:H98558
H77755-V -- Feeder House Drum Shaft - JD 53.375"
$49.00
Models/Applications:7700 Series, 7700, 7720
Replaces:H77755
H76631-V -- Feeder House Drum Shaft - JD 42.562"
$55.00
Models/Applications:6600 Series, 6600, 6620
Replaces:H76631
H77751-V -- Feeder House Drum Shaft - JD
$38.99
Models/Applications:4400 Series, 4400, 4420
Replaces:H77751
AXE29353-N -- Feeder House Bottom - Machines with Hydraulic Fore / Aft Tilt
$775.00
****MADE TO ORDER - 4-6 WEEK LEAD TIME****
PROUDLY MADE IN THE USA!
Replace a worn, thin, cracked, or washboarded feeder house bottom with this complete aftermarket feeder house floor for John Deere® combines equipped with hydraulic fore/aft tilt.
AXE29353-N replaces OEM AXE29353 and restores a smooth, solid surface beneath the feeder house conveyor chain. A badly worn floor can interfere with crop flow and eventually allow the conveyor slats to contact or wear through the bottom. Replacing the complete floor provides a clean repair without patching an already weakened feeding surface.
Key Features
Direct aftermarket replacement for John Deere® AXE29353
Designed specifically for feeder houses with hydraulic fore/aft tilt
Complete replacement floor—not a liner or repair overlay
Replaces worn, damaged, cracked, or washboarded feeder house bottoms
Restores a smooth surface beneath the feeder house conveyor chain
Fits John Deere® Combines
S660, S670, S680, S685 and S690
S760, S770, S780, S785 and S790
S7 600, S7 700, S7 800, S7 850 and S7 900
Important Fitment Note
This floor is for machines equipped with hydraulic fore/aft feeder house tilt. Fitment depends on feeder house configuration, not model number alone. Verify that the existing floor uses OEM part number AXE29353 before ordering.
AR39052-N -- Drive Sprocket Shaft Oil Seal - Ruberized Outer Ring
$6.35
Models/Applications:40 Series, 90 Series, 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294
Replaces:AR39052
AH143100-N -- Drive Sprocket #60 Chain 13 Tooth SN(665401- )
$92.78
Models/Applications: 493, 494, 592, 693, 694, 893, 894, 1092, 1290, 1291, 1293
Replaces: AH143100
KXE10488-N -- Drive Sprocket - 8 Tooth 600, 700, C Series
$43.42
Models/Applications: 606 (SN 745101- ), 606C (SN 745101- ), 608 (SN 745101- ), 608C (SN 745101- ), 612 (SN 745101- ), 612C (SN 745101- ), 612FC, 616, 616C, 618, 618C, 706C, 708C, 708FC, 712C, 712FC, 716C, 718C, C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F, C18R
OEM Brand: JD
Reference Number(s):KXE10488
Part Notes: Includes v-ring seal, 8 teeth, 1" hex bore, new - aftermarket part
Other Notes: For use on JD heads with RowMax kits
