John Deere

CLOSING WHEEL ARM KIT FOR JOHN DEERE Closing Wheel Arm Kit. Includes Cast Iron Wheel Arm, Support, T-Handle, Spring, Bushings and Fasteners. Does Not Include Wheels. Fits MaxEmerge2, Plus, Pro, XP, XP Pro Planters, 1530, 1535 Drills. Brand AgSmart

4-1/2 X 16 PLANTER GAUGE WHEEL - BLACK Gauge wheel assembly for John Deere Model 7300 built 1992 and after, and all Model 1700.Replaces AA41359. Diameter 16 Inch Width 4-1/2 Inch Brand AgSmart Spoked Center No Nylon Wheel Half No Bearing SMA88515440 Bearing I.D. Stem With Groove Color Black Tire Hoosier / SMA # 204008 Tire Composition Rubber

4-1/2 X 16 PLANTER GAUGE WHEEL - YELLOW Gauge wheel assembly for John Deere Model 7300 built 1992 and after, and all Model 1700.  Diameter 16 Inch Width 4-1/2 Inch Brand AgSmart Spoked Center No Nylon Wheel Half No Bearing SMA88515440 Bearing I.D. Stem With Groove Color Yellow Tire Hoosier / SMA # 204008 Tire Composition Rubber

4-1/2 X 16 PLANTER GAUGE WHEEL - BLACK For models John Deere 7000, 7100, 7300 series before 1992. Diameter 16 Inch Width 4-1/2 Inch Brand AgSmart Spoked Center No Nylon Wheel Half No Bearing SMA888515240 Bearing I.D. Stem With Hole Color Black Tire Hoosier / SMA # 204008 Tire Composition Rubber

AP-1785V-SHOT CAST CHROME V-SLICE Fits John Deere MaxEmerge Planters Built Before 2006 and Kinze 2000. Includes Slicer, Fertilizer Tubing and Mounting Hardware. Allows in-furrow applicaiton of starter fertilizer. Includes all necessary hardware, four per box.

AP1985V-SHOT CAST CHROME V-SLICE For John Deere XP, XP Pro, MaxEmerge (2006 Up) Planters. Does Not Fit Exact Emerge. Includes Slicer, Fertilizer Tubing and mounting hardware.

SCHAFFERT REBOUNDER FOR JOHN DEERE

HUB-4 BOLT ASBY FOR JD GRAIN DRILL Fits John Deere Drill(s): 750, 1560, 1565, 1590, 1690, 1835, 1860, 1890, 1895, 1990Replaces John Deere OEM Number(s): AN281856Triple-lip bearing Brand AgSmart

SEED BOOT-LH AGRITUF 1590-1990 JD DRILL Fits 1590, 1690, 1890, 1895, 1990 John Deere DrillsReplaces John Deere: N284024, N283731, N284045 Brand AGRITUF

SEED BOOT-RH AGRITUF 1590-1990 JD DRILL Fits 1590, 1690, 1890, 1895, 1990 John Deere DrillsReplaces John Deere: N284025, N283730, N284044 Brand AGRITUF

The LANSS21466 is a double jack stand kit for John Deere® 600, 700, & C Series corn heads. This kit is recommended for any John Deere® 600, 700, & C Series corn heads equipped with Lankota Generation 3 Stalk Stompers® OR John Deere® OEM Stalk Deflectors. This stand kit will reduce excessive Stalk Stomper/Deflector spring tension during long periods of header storage. No drilling, cutting or welding required. Installation Instructions

The LANSS14512 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2011 and older John Deere® 600 Series corn heads. This kit will fit any John Deere® factory 600 Series corn head, 2011 and older, accommodating all spacing configurations. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS21451) are interchangeable with John Deere® original shoe and mount. Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

The LANSS231 is Lankota's Generation 3 Stalk Stomper® with poly assembly. The LANSS231 is interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). This Stalk Stomper® is included in the LANSS11362 & LANSS14512 kits. Lankota's LANSS21466 jack stand is recommended, but not required.

The LANSS11362 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2012+ John Deere® corn heads. This kit will fit any John Deere® factory corn head from 2012 and newer, including all spacing configurations of 600, 700 & C Series corn heads. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS86614) are interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

The LANAUG702K is an unloading auger extension kit for John Deere® 50 Series and older combines (model numbers 6620 to 9750). It also fits any CTS combine. This kit extends the length of the factory unloading auger by 3'. The LANAUG702K is not for use with John Deere® 60, 70, or S Series High Unloading Rate (HUR) augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 60, 70, & "S" Series combines with 17" High Unloading Rate auger (HUR), order the LANAUGHURK For Case IH® combine augers, order the LANAUGCIHK Installation Instructions