John Deere

WEAR RING FOR 213544 HUB Wear Ring for 213544 disc opener hub on John Deere 750, 1500, 1800, and 1900 series drills. Replaces N219000. Brand AgSmart

AP-1785V-SHOT CAST CHROME V-SLICE Fits John Deere MaxEmerge Planters Built Before 2006 and Kinze 2000. Includes Slicer, Fertilizer Tubing and Mounting Hardware. Allows in-furrow applicaiton of starter fertilizer. Includes all necessary hardware, four per box.

AP1985V-SHOT CAST CHROME V-SLICE For John Deere XP, XP Pro, MaxEmerge (2006 Up) Planters. Does Not Fit Exact Emerge. Includes Slicer, Fertilizer Tubing and mounting hardware.

SEED BOOT-LH AGRITUF 1590-1990 JD DRILL Fits 1590, 1690, 1890, 1895, 1990 John Deere DrillsReplaces John Deere: N284024, N283731, N284045 Brand AGRITUF

SEED BOOT-RH AGRITUF 1590-1990 JD DRILL Fits 1590, 1690, 1890, 1895, 1990 John Deere DrillsReplaces John Deere: N284025, N283730, N284044 Brand AGRITUF

The LANSS21466 is a double jack stand kit for John Deere® 600, 700, & C Series corn heads. This kit is recommended for any John Deere® 600, 700, & C Series corn heads equipped with Lankota Generation 3 Stalk Stompers® OR John Deere® OEM Stalk Deflectors. This stand kit will reduce excessive Stalk Stomper/Deflector spring tension during long periods of header storage. No drilling, cutting or welding required. Installation Instructions

The LANSS14512 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2011 and older John Deere® 600 Series corn heads. This kit will fit any John Deere® factory 600 Series corn head, 2011 and older, accommodating all spacing configurations. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS21451) are interchangeable with John Deere® original shoe and mount. Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

The LANSS231 is Lankota's Generation 3 Stalk Stomper® with poly assembly. The LANSS231 is interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). This Stalk Stomper® is included in the LANSS11362 & LANSS14512 kits. Lankota's LANSS21466 jack stand is recommended, but not required.

The LANAUG702K is an unloading auger extension kit for John Deere® 50 Series and older combines (model numbers 6620 to 9750). It also fits any CTS combine. This kit extends the length of the factory unloading auger by 3'. The LANAUG702K is not for use with John Deere® 60, 70, or S Series High Unloading Rate (HUR) augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 60, 70, & "S" Series combines with 17" High Unloading Rate auger (HUR), order the LANAUGHURK For Case IH® combine augers, order the LANAUGCIHK Installation Instructions

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD4000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD4000K fits John Deere® combine models 00, 10,and all 50 Series Walker combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 HUR = High Unload Rate Recommended Seasonal Maintenance Video

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD3000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD3000K fits John Deere® NON-HUR combine models 60 - S770, and all 50 Series STS combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2   Recommended Seasonal Maintenance

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD2000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD2000K fits John Deere® combine models S680, S780, S690, & S790. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 *HUR= High Unload Rate   Lankota Seasonal Recommended Maintenance Video

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD1000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD1000K fits John Deere® HUR combine models 9560 - S770. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2   Recommended Seasonal Maintenance

Extend the reach of your John Deere® 60, 70, and S Series combines with the LANAUGHURK. Designed for 17" High Unloading Rate (HUR) augers, this bolt-on extension adds 48" without the need for welding or drilling. Ideal for non-folding augers, it enhances functionality and efficiency. Note: Not compatible with X9 series combines or factory 28.5' augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 50 Series and older combines, order the LANAUG702K Installation Instructions *Plan roughly 4 hours for installation of this kit Weight & Dimensions: 215 lbs; 52"x48"x27".

Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C16R, C18R OEM Brand: JD Reference Number(s): 83758 Part Notes: This part will cover, and replace, aftermarket poly patches. Stainless steel, these patches will not allow the screws to pull through the part while chaff builds up behind it. Kit includes screws to mount the wear strip.  Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it. Get it free of any debris. Take some silicone and put about 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.  Material: USA Stainless Steel PROUDLY MADE IN THE USA! Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions. This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season. Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.