John Deere S770 Combine

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD1000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD1000K fits John Deere® HUR combine models 9560 - S770. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2   Recommended Seasonal Maintenance

Extend the reach of your John Deere® 60, 70, and S Series combines with the LANAUGHURK. Designed for 17" High Unloading Rate (HUR) augers, this bolt-on extension adds 48" without the need for welding or drilling. Ideal for non-folding augers, it enhances functionality and efficiency. Note: Not compatible with X9 series combines or factory 28.5' augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 50 Series and older combines, order the LANAUG702K Installation Instructions *Plan roughly 4 hours for installation of this kit Weight & Dimensions: 215 lbs; 52"x48"x27".

****MADE TO ORDER - 4-6 WEEK LEAD TIME**** DESCRIPTION:  Feeder House Floor, JD, "S" Series Late APPLICATION: S650 SN(775001),S660 SN(775001),S670 SN(775001),S680 SN(775001),S690 SN(775001),S760,S770,S780,S785,S790 Replaces:AXE36568

****MADE TO ORDER - 4-6 WEEK LEAD TIME**** PROUDLY MADE IN THE USA! Replace a worn, thin, cracked, or washboarded feeder house bottom with this complete aftermarket feeder house floor for John Deere® combines equipped with hydraulic fore/aft tilt. AXE29353-N replaces OEM AXE29353 and restores a smooth, solid surface beneath the feeder house conveyor chain. A badly worn floor can interfere with crop flow and eventually allow the conveyor slats to contact or wear through the bottom. Replacing the complete floor provides a clean repair without patching an already weakened feeding surface. Key Features Direct aftermarket replacement for John Deere® AXE29353 Designed specifically for feeder houses with hydraulic fore/aft tilt Complete replacement floor—not a liner or repair overlay Replaces worn, damaged, cracked, or washboarded feeder house bottoms Restores a smooth surface beneath the feeder house conveyor chain Fits John Deere® Combines S660, S670, S680, S685 and S690 S760, S770, S780, S785 and S790 S7 600, S7 700, S7 800, S7 850 and S7 900 Important Fitment Note This floor is for machines equipped with hydraulic fore/aft feeder house tilt. Fitment depends on feeder house configuration, not model number alone. Verify that the existing floor uses OEM part number AXE29353 before ordering.