JD Poly Day - 12 Days of Christmas

Description: NEW Center Divider Hood, 30" for John Deere® Corn Head  Fitments: 606, 608, 612, 706, 708, 712, C6R, C8R, C12R OEM Brand: John Deere® OEM Reference Number: AXE10906 Replace a cracked, worn, or damaged center divider hood with a durable, American-made aftermarket replacement built for harvest. The Landbouw™ AXE10906-N is designed to replace John Deere® part number AXE10906 on compatible 30-inch-row corn heads. Molded in the USA from high-impact LLDPE (Linear Low-Density Polyethylene), this divider hood delivers the toughness and flexibility needed to handle crop pressure, field debris, and everyday harvest wear. This is the molded center crop-divider hood—not the front snout point. All bushings required for the divider hood are included. Other mounting hardware required for installation is not included. Optional Aftermarket Wear Protection: An OEM wear strip is not part of the original AXE10906 divider hood. Some operators add aftermarket stainless-steel wear protection to high-contact areas, and previously repaired hoods may already have an aftermarket strip installed. Landbouw offers optional wear strips and patch components separately for customers who want additional protection. View Optional Aftermarket Wear Protection: Large Patch Small Patch Key Features and Benefits Direct Replacement for AXE10906: Designed to replace the factory 30-inch center divider hood on compatible John Deere® corn heads. Correct Divider-Hood Component: Replaces the molded center crop-divider hood, not the separate front snout point. Required Bushings Included: Comes with all bushings required for the divider hood. Durable LLDPE Construction: Molded from LLDPE for a practical combination of toughness, flexibility, and impact tolerance in demanding harvest conditions. Made in the USA: Manufactured in Rock Valley, Iowa, using precision tooling for dependable fit and consistent quality. Cost-Effective Aftermarket Replacement: Restore your corn head without paying dealership pricing for the equivalent replacement hood. John Deere® Corn Head Fitment The AXE10906-N fits the following John Deere® 30-inch-row corn heads when originally equipped with OEM part number AXE10906: 600 Series Corn Heads 606 606C 608 608C 612 612C 616 616C For applicable 606 through 612C models, verify that the corn head is after serial number 745101. 600 Series Folding Corn Heads 608FC — after serial number 129189 612FC 700 Series Corn Heads 706C 708C 712C 716C 700 Series Folding Corn Heads 708FC 712FC C-Series Corn Heads C6R C8R C12R C16R C8F C12F C16F Fitment Notice: Model names alone may not confirm compatibility. John Deere® used different divider components depending on serial number and corn-head configuration. Verify that your existing hood references AXE10906 before ordering. Technical Specifications Landbouw Part Number: AXE10906-N OEM Reference Number: AXE10906 Component Type: Center crop-divider hood Row Spacing: 30 inches Material: LLDPE (Linear Low-Density Polyethylene) OEM Compatibility: John Deere® Required Hood Bushings: Included Other Mounting Hardware: Not included OEM Wear Strip: Not used or included Optional Aftermarket Wear Protection: Available separately Country of Origin: Made in the USA What Is Included? This listing includes: One AXE10906-N molded center divider hood All bushings required for the divider hood This listing does not include: The remaining mounting hardware required for installation The front snout point or other divider components Optional aftermarket wear strips or stainless-steel patch components Reuse your existing mounting hardware if it remains serviceable, or purchase the necessary replacement hardware separately. Frequently Asked Questions Is AXE10906-N a snout point?No. AXE10906-N is the molded center crop-divider hood. The forward snout point is a separate component and is not included. Are the bushings included?Yes. The divider hood comes with all bushings required for the hood itself. Is the other mounting hardware included?No. Other hardware needed to mount the hood to the corn head is not included. Existing serviceable hardware may be reused, or replacement hardware can be purchased separately. Does this divider hood use an OEM wear strip?No OEM wear strip is part of the original AXE10906 hood. Landbouw offers optional aftermarket wear strips and patch components for operators who want added protection in high-contact areas, but they are not required and are sold separately. Does AXE10906-N fit folding corn heads?Yes, it fits specific folding models, including the 608FC after serial number 129189, 612FC, 708FC, and 712FC. Always confirm that the mounting position being repaired originally uses AXE10906. How should I verify fitment before ordering?Compare your existing part with OEM reference number AXE10906 and verify the corn-head model, configuration, and serial number. Contact Landbouw if you need help confirming compatibility. John Deere® is a registered trademark of Deere & Company. OEM names, trademarks, models, and part numbers are used for identification and compatibility purposes only. Landbouw™ is not sponsored, approved, or affiliated with Deere & Company.

Description: Poly Divider - 30" Replacement - 90 Series SN(695301-) Fitments: 493, 693, 893, 1293 OEM Brand: JD Reference Number(s): AH160065 Material: Poly Other Notes: For use on JD 90 series late model serial number corn heads SN(695301- ) Finish: OEM Green Proudly Made In The USA! This 30" Poly Divider is a direct-fit replacement for John Deere® 90 Series corn heads. Molded from durable, impact-resistant polyethylene and finished in OEM green, it’s built to handle tough harvesting conditions while maintaining smooth crop flow and long service life. Proudly Made in the USA, this divider delivers reliable performance with OEM-quality fit and finish.

Description: Poly Snout - 30'' Replacement 90 Series SN(695301- ) Fitments: 493, 693, 893, 1293 (Late) OEM Brand: JD Reference Number(s): AH168313 Material: Poly Other Notes: For use on JD 90 series late model serial number corn heads SN(695301- ) Finish: OEM Green Proudly Made In The USA! This 30" Poly Replacement Snout is designed for late-serial-number John Deere® 90 Series corn heads. Manufactured from durable, impact-resistant polyethylene and finished in OEM green, it delivers smooth crop flow, excellent wear resistance, and reliable field performance. Proudly Made in the USA, this snout offers OEM-level fit and quality for dependable harvesting.

Description: Poly Snout - 30'' Replacement 90 Series SN( -695300) Fitments: 493, 693, 893, 1293 (Early Serial Number)  OEM Brand: JD Reference Number(s): AH146577 Material: Poly Other Notes: For use on JD 90 series early model serial number corn heads SN( -695301) Finish: OEM Green Proudly Made In The USA! This 30" Poly Replacement Snout is designed for early-serial-number John Deere® 90 Series corn heads. Manufactured from durable, impact-resistant polyethylene and finished in OEM green, it delivers smooth crop flow, excellent wear resistance, and reliable field performance. Proudly Made in the USA, this snout offers OEM-level fit and quality for dependable harvesting.

Models/Applications: 40 Series, 443, 444, 643, 644, 843, 844, 1243, 1244  Replaces: AH115402

Description:  Narrow Row Center Snout with Point - 30" JD Green Fitments: 40 Series, 443, 643, 843, 1243  OEM Brand: John Deere® - Polytin™ MADE IN THE USA!  The Narrow Row Center Snout with Point - 30" (JD Green) is built for John Deere® 40 Series cornheads, including models 443, 643, 843, and 1243. Manufactured by Polytin™ and proudly made in the USA, this snout delivers a durable, precise fit that withstands the toughest harvest conditions.

Models/Applications: 40 Series, 443, 444, 643, 644, 843, 844, 1243, 1244  Replaces: AH115403

Description: 40 Series Center Divider(Hood) Fitments: 443, 643, 843, 1243 Replaces: 40 Series Dividers (Hoods) MADE IN THE USA! 

Description: 600 / 700 Series / C Series - Center Snout 30'' Fitments: 606, 608, 612, 616, 706, 708, 712, 716, C6R, C8R, C12R, C16R OEM Brand: John Deere® OEM Reference Number: AXE10905 MADE IN THE USA!  This 30" Center Snout is a direct-fit replacement for John Deere® 600, 700, and C Series corn heads. Molded from durable, impact-resistant polyethylene, it’s built to handle tough harvesting conditions while maintaining smooth crop flow and long service life. Proudly Made in the USA, this snout delivers dependable performance with OEM-level fit and finish.

Description: 40" Center Divider Assembly, JD Green Fitments: 40 Series, 444, 644, 844, 1244

Description: 38" Center Divider Assembly, JD Green Fitments: 40 Series, 444, 644, 844, 1244

Description: 38" - 40" Center Snout Assembly, JD Green Fitments: 40 Series, 444, 644, 844, 1244 Replaces:

Description: 36" Center Snout Assembly, JD Green Fitments: 40 Series, 444, 644, 844, 1244 Replaces:

Models/Applications:40 Series, 444, 644, 844, 1244 Replaces: