Corn Head

Attach any header to a CNH® combine with the LAN2P5065-2AFC. Simply connect the header hydraulic lines to this block and mount to the header. The LAN2P5065-2AFC will work with newer single point Case IH® and New Holland® combines.

The LANSS24608 is a complete Stalk Stomper® mount, hardware and shoe with poly kit for ONE row. This kit will fit Case® 4400 Series & like model New Holland® corn heads. The Stalk Stomper® poly liner is 1/4" thick and held to the main shoe with carriage bolts. No tools required to remove shoe from mount if needed. For 4412 30" corn heads, also order (1) LANSS4613 kit for use with rows 1 & 12. Installation Instructions

The LANSS21466 is a double jack stand kit for John Deere® 600, 700, & C Series corn heads. This kit is recommended for any John Deere® 600, 700, & C Series corn heads equipped with Lankota Generation 3 Stalk Stompers® OR John Deere® OEM Stalk Deflectors. This stand kit will reduce excessive Stalk Stomper/Deflector spring tension during long periods of header storage. No drilling, cutting or welding required. Installation Instructions

The LANSS14512 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2011 and older John Deere® 600 Series corn heads. This kit will fit any John Deere® factory 600 Series corn head, 2011 and older, accommodating all spacing configurations. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS21451) are interchangeable with John Deere® original shoe and mount. Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

The LANSS231 is Lankota's Generation 3 Stalk Stomper® with poly assembly. The LANSS231 is interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). This Stalk Stomper® is included in the LANSS11362 & LANSS14512 kits. Lankota's LANSS21466 jack stand is recommended, but not required.

The LANSS11362 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2012+ John Deere® corn heads. This kit will fit any John Deere® factory corn head from 2012 and newer, including all spacing configurations of 600, 700 & C Series corn heads. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS86614) are interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 1244, 2206, 2208, 2212, 3206, 3208, 3212, 3406, 3408, 3412, 974, 493, 494, 693, 694, 893, 894, 1293, 1294 OEM Brand: IH, JD, NH Reference Number(s): AN102448, 587300, 745023, 745023, 176283C91, 84549635, 86583947, 87034967 Material: Non-greaseable idler sprocket - 8 teeth - CA555 Chain Other Notes: 2 idler sprockets required per row MADE IN THE USA!!!

Drago Series 1 & 2 Divider/Bonnet Wear Strip Kit (1 Kit Per Row) Fitments: Series 1 & 2 Dividers/Bonnets OEM Brand: Drago® Material: Stainless Steel 

Models/Applications: 1063 OEM Brand: IH  Part Features: Tracker Kit should only be used on a 1063 Corn Head. PTO-Shaft Included! PTO Drive Shaft: 1-1/8'' Hex Coupler End 1-1/8'' Hex Clamp End (33" - OAL) *If you need a different PTO Drive Shaft please contact us! 

Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C16R, C18R OEM Brand: JD Reference Number(s): 83758 Part Notes: This part will cover, and replace, aftermarket poly patches. Stainless steel, these patches will not allow the screws to pull through the part while chaff builds up behind it. Kit includes screws to mount the wear strip.  Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it. Get it free of any debris. Take some silicone and put about 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.  Material: USA Stainless Steel PROUDLY MADE IN THE USA!

PTO Drive Shaft - Contour Master to fit John Deere Header requires 2 drivelines per head *PTO Shafts are priced individually Models/Applications: 492, 493, 494, 592, 594, 692, 693, 694, 892, 893, 894, 1092, 1290, 1291, 1293, 900D, 900F, 900P, 900R, 913, 915, 918, 920, 922, 924, 925, 930, 930F Replaces: AH220096

Models/Applications: 1083 OEM Brand: IH Part Features: Tracker drive kit to be used on 1083 Case-IH corn head - PTO Shaft included!  PTO Drive Shaft - 1-1/8'' Hex Coupler End 1-1/8'' Hex Clamp End (33" - OAL) *If you need a different PTO Drive Shaft please contact us! 

Models/Applications: 3206, 3208, 3212, 3406, 3408, 3412 OEM Brand: CNH Reference Number(s): 87598741 Part Features: Heat treated and tungsten coated knife edge for extended wear Material: USA Steel MADE IN THE USA!

Stalk Roll, Right Hand for JD 600 Series Cornhead, HXE41141 Models/Applications: 606 (ASN 740312), 606C (BSN 745100), 608 (ASN 740474), 608C (BSN 745100), 608FC (ASN 129189), 612 (ASN 740750), 612C (BSN 745100), 612FC, 616, 616C, 618, 618C, 706C, 708C, 708FC, 712C, 712FC, 716C, 718C Replaces: HXE41142 Enhance your harvesting efficiency with the New Aftermarket Opposing Stalk Rolls, which are expertly designed for superior crop residue processing. This high-performance Stalk Roll features a knife roll that shreds stalks and residue into a confetti-like form, ensuring finer and more manageable crop residue. Constructed for durability, it effectively handles and processes corn and other crops, minimizing the need for further fieldwork. Its robust build is ideal for harsh field conditions, making it a reliable choice for main