Corn Head

The LANSS3406R2 is a Lankota Stalk Stomper® Mounting Kit for CaseIH® 2206/2406/3206/3406 Series 30" & New Holland® 98 "X" Series Corn Heads. The kit contains the toolbars, mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®.   Lankota Stalk Stomper® shoes are not included in this kit, and are sold separately. The following items are required to cover 2 rows of a CaseIH® 2206, 2406, 3206, or 3406 Series corn head: (1) LANSS3406R2: Mounting Kit (2) LANSS755BLK: Stalk Stomper® Shoes with Poly Lankota Stalk Stompers® (LANSS755BLK) are NOT included, and are sold separately Installation Instructions

The LANSS2600XO is a Lankota Stalk Stomper® mount kit for a pair of rows on Case IH® 2600, 4200, and 4400 Series chopping corn heads. The kit mounts right to the row unit main arm beam. The kit contains the mounts and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stomper® shoes are not included in this kit, and are sold separately. The following items are required to cover 2 rows of a Case IH® 2600, 4200, or 4400 Series chopping corn head: (1) LANSSCIH2600XO: Mounting Kit (2) LANSS755BLK: Stalk Stomper® Shoes with Poly Installation Instructions

The LANSS231BLK is Lankota's black Generation 3 Stalk Stomper® with poly assembly. The LANSS231BLK is engineered to work with all Lankota Generation 3 Stalk Stomper® kits for Case IH® and like New Holland® corn heads.

The LANSS1240/90R6 is a Lankota Stalk Stomper® mounting kit for a 12 row John Deere® 40/90 Series 30" corn head. The kit contains the toolbars, installation mounts, Stalk Stomper®mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stompers® (LANSS755) are not included in this kit, and are sold separately. Installation Instructions

The LANPSJD100 is a Stalk Stomper® kit for John Deere® three point mounted corn planters. Lankota's corn planter Stalk Stompers® will smear last year's residue before it causes excessive damage to your transport/drive tires. The simple, rugged, abrasion resistant material design install in minutes and will allow for years of continued performance. Each LANPSJD100 contains the Stalk Stomper®, mount, and hardware required to cover 1 wheel. The LANPSJD100 fits John Deere® models including, but not limited to, 1705, 1710, 1725, & 7300. Contact VH for other model inquiries. Installation Instructions

Applications: CM630, CM830, CM1230, CM1630  Poly Corn Snout End Shield – High-Performance Design Built for durability and performance, our Poly Corn Snout is engineered with high-impact polyethylene and reinforced steel framing to withstand the toughest harvesting conditions. Features: Heavy-Duty Polyethylene Construction: Resistant to cracking, UV damage, and wear from debris and field conditions. Steel Reinforcement: Internal powder-coated steel brackets provide added structure and long-term durability. Replaceable Steel Tip: Built for high-wear zones with easy replacement when needed. Mounting Chain Included: Secures the shield firmly in place to prevent bounce or loss during operation. Universal Fitment: Designed to work with a wide range of corn head models. Ideal for custom builds or replacements, this component enhances protection, improves flow, and reduces crop damage across varying field conditions.

The LANSS21466 is a double jack stand kit for John Deere® 600, 700, & C Series corn heads. This kit is recommended for any John Deere® 600, 700, & C Series corn heads equipped with Lankota Generation 3 Stalk Stompers® OR John Deere® OEM Stalk Deflectors. This stand kit will reduce excessive Stalk Stomper/Deflector spring tension during long periods of header storage. No drilling, cutting or welding required. Installation Instructions

The LANSS14512 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2011 and older John Deere® 600 Series corn heads. This kit will fit any John Deere® factory 600 Series corn head, 2011 and older, accommodating all spacing configurations. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS21451) are interchangeable with John Deere® original shoe and mount. Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

The LANSS231 is Lankota's Generation 3 Stalk Stomper® with poly assembly. The LANSS231 is interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). This Stalk Stomper® is included in the LANSS11362 & LANSS14512 kits. Lankota's LANSS21466 jack stand is recommended, but not required.

Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C16R, C18R OEM Brand: JD Reference Number(s): 83758 Part Notes: This part will cover, and replace, aftermarket poly patches. Stainless steel, these patches will not allow the screws to pull through the part while chaff builds up behind it. Kit includes screws to mount the wear strip.  Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it. Get it free of any debris. Take some silicone and put about 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.  Material: USA Stainless Steel PROUDLY MADE IN THE USA! Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions. This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season. Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.

PTO Drive Shaft - Contour Master to fit John Deere Header requires 2 drivelines per head *PTO Shafts are priced individually Models/Applications: 492, 493, 494, 592, 594, 692, 693, 694, 892, 893, 894, 1092, 1290, 1291, 1293, 900D, 900F, 900P, 900R, 913, 915, 918, 920, 922, 924, 925, 930, 930F Replaces: AH220096

Models/Applications: 3206, 3208, 3212, 3406, 3408, 3412 OEM Brand: CNH Reference Number(s): 87598741 Part Features: Heat treated and tungsten coated knife edge for extended wear Material: USA Steel MADE IN THE USA!

Stalk Roll, Right Hand for JD 600 Series Cornhead, HXE41141 (Late, Opposed Austempered to 45 HRC) Models/Applications: 606 (ASN 740312), 606C (BSN 745100), 608 (ASN 740474), 608C (BSN 745100), 608FC (ASN 129189), 612 (ASN 740750), 612C (BSN 745100), 612FC, 616, 616C, 618, 618C, 706C, 708C, 708FC, 712C, 712FC, 716C, 718C Replaces: HXE41142 Enhance your harvesting efficiency with the New Aftermarket Opposing Stalk Rolls, which are expertly designed for superior crop residue processing. This high-performance Stalk Roll features a knife roll that shreds stalks and residue into a confetti-like form, ensuring finer and more manageable crop residue. Constructed for durability, it effectively handles and processes corn and other crops, minimizing the need for further fieldwork. Its robust build is ideal for harsh field conditions, making it a reliable choice for main

Stalk Roll, Left Hand for JD 600 Series Cornhead, HXE41141 (Late, Opposed Austempered to 45 HRC) Models/Applications: 606 (ASN 740312), 606C (BSN 745100), 608 (ASN 740474), 608C (BSN 745100), 608FC (ASN 129189), 612 (ASN 740750), 612C (BSN 745100), 612FC, 616, 616C, 618, 618C, 706C, 708C, 708FC, 712C, 712FC, 716C, 718C Replaces: HXE41141 Enhance your harvesting efficiency with the New Aftermarket Opposing Stalk Rolls, which are expertly designed for superior crop residue processing. This high-performance Stalk Roll features a knife roll that shreds stalks and residue into a confetti-like form, ensuring finer and more manageable crop residue. Constructed for durability, it effectively handles and processes corn and other crops, minimizing the need for further fieldwork. Its robust build is ideal for harsh field conditions, making it a reliable choice for maintaining optimal performance for your corn head.

Rubber Divider Shield, JD 600 Series Models/Applications: 606, 606C, 608, 608C, 612, 612C (BSN 745100) Replaces: H22744 Extend the Life of Your Corn Head Dividers with Rubber Shields Enhance the durability of your plastic corn head dividers with our high-quality rubber shields. Designed to fit seamlessly over your existing dividers, these rubber shields provide a robust protective layer that significantly extends their lifespan. Key Benefits: Durable Protection: Rubber shields absorb impact and reduce wear, shielding your plastic dividers from damage caused by harsh field conditions and constant use. Extended Lifespan: By minimizing direct contact with abrasive elements, these shields prevent premature degradation, ensuring your dividers last longer and perform optimally. Easy Installation: Our rubber shields are designed for a perfect fit, making installation quick and hassle-free without the need for specialized tools. Cost-Effective Solution: Protecting your investment with rubber shields can help you avoid costly replacements and repairs, offering a budget-friendly way to maintain your equipment. Upgrade your corn head dividers with rubber shields and keep your equipment running smoothly season after season.