

LANSS21466 -- Double Jack Stand Kit for John Deere® 600 & 700 Series corn heads
$634.25
The LANSS21466 is a double jack stand kit for John Deere® 600, 700, & C Series corn heads. This kit is recommended for any John Deere® 600, 700, & C Series corn heads equipped with Lankota Generation 3 Stalk Stompers® OR John Deere® OEM Stalk Deflectors. This stand kit will reduce excessive Stalk Stomper/Deflector spring tension during long periods of header storage. No drilling, cutting or welding required.
Installation Instructions


AXE10906WS -- Wear Strip - JD 30" OE Divider - 600, 700, C SERIES (Stainless Steel 4-1/2" High 16...
$34.00
Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 616C, 706, 706C, 708, 708C, 712, 712C, 716, 716C, 718, 718C, C6R, C8R, C12R, C12F, C16R, C16F, C18R
OEM Brand: JD
Reference Number(s):
Part Features: Stainless steel wear strip to help prolong the life of your divider by protecting the plastic from cracking
Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers
Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it - get it free of any debris. Take some silicone and put about an 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.
Material: USA Stainless Steel
Proudly Made In The USA!

26-BI-600L-CA-GN -- 26'' Bi-Fold Center Assembly 600 Series SN( 745101- ) JD Green
$785.00
26'' Bi-Fold Center Assembly 600 Series SN( 745101- ) JD Green

24-BI-600L-CA-GN -- 24'' Bi-Fold Center Complete Assembly 600 Series - JD Green
$785.00
24'' Bi-Fold Center Complete Assembly 600 Series - JD Green

20-BI-600E-CA-GN -- 20'' Bi-Fold Center Assembly 600 Series (Early) SN( -745000)
$725.00
20'' Bi-Fold Center Assembly 600 Series (Early) SN( -745000)

AH234656-BAR -- AR (Abrasion Resistant) LH Deck Plate - Beveled 600, 700, C Series
$97.50
Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 616C, 618, 618, 706, 706C, 708, 708C, 712, 712C, 716, 716C, 718, C6R, C8R, C12F, C12R, C16F, C16R, C18R
OEM Brand: JD
Reference Number(s): AH234656, AXE86178
Part Features: Beveled to provide more surface area with the kernel as it hits the deck plate, to try and reduce butt-shelling/kernel loss - hydraulically adjust deck plate - hard surfaced for prolonged wear - made of AR material for extra resistance to wear
Beveled not shown in the picture
Other Notes: For late model serial number 600 series SN(745101- )
Material: AR400 - USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!


H237437-BAR -- AR (Abrasion Resistant) RH Deck Plate - Beveled 600, 700, C Series
$69.00
Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 616C, 618, 618, 706, 706C, 708, 708C, 712, 712C, 716, 716C, 718, C6R, C8R, C12F, C12R, C16F, C16R, C18R
OEM Brand: JD
Reference Number(s): H237437
Part Features: Beveled to provide more surface area with the kernel as it hits the deck plate, to try and reduce butt-shelling/kernel loss - stationary/manual adjust deck plate - hard surfaced for prolonged wear - made of AR material for extra resistance to wear
Other Notes: For late model serial number 600 series SN(745101- )
Material: AR400 - USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!

H101677-N -- Slip Clutch Jaw 1-1/4''
$43.34
Combine Brand: JD
Combine Models: 6620, 6622, 7720, 8820, 9400, 9410, 9450, 9500SH, 9501, 9510, 9510SH, 9550, 9550SH, 9560STS, 9600, 9610, 9650, 9650CTS, 9660, 9660CTS, 592, CTS, CTS II
Corn Head Brand: JD
Corn Head Models: 493, 693, 893, 1293, 694, 894, 1294, 606, 608, 612
Reference Number(s): H101677
Material: USA Ductile Iron
Other Notes: Fits feeder house sprocket clip clutch - fits corn head auger slip clutch
Finish: Heat Treated - Unfinished
Proudly Made In The USA!

JD600CSK-E -- Gathering Chain & Sprocket Kit SN( -745100)
Contains 2 - AH209879-N Chains 2 - AH...
$299.00
Models/Applications:600 Series, 606, 608, 612
Replaces:

AH234656-B -- LH Deck Plate - Beveled 600, 700, C Series
$96.00
Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 616C, 618, 618, 706, 706C, 708, 708C, 712, 712C, 716, 716C, 718, C6R, C8R, C12F, C12R, C16F, C16R, C18R
OEM Brand: JD
Reference Number(s): AH234656, AXE86178
Part Features: Beveled to provide more surface area with the kernel as it hits the deck plate, to try and reduce butt-shelling/kernel loss - hydraulically adjust deck plate - hard surfaced for prolonged wear
Beveled is not shown in the picture
Other Notes: For 600 series JD corn heads late serial number (745101- )
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!

AH232250-B -- LH Deck Plate - Beveled 600 Series SN( -745101)
$94.00
Models/Applications:600 Series, 606, 608, 612
Replaces:AH232250


H237437-N -- Right Hand Deck Plate 600 Series SN(745101- )
$51.00
Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 616C, 618, 618, 706, 706C, 708, 708C, 712, 712C, 716, 716C, 718, C6R, C8R, C12F, C12R, C16F, C16R, C18R
OEM Brand: JD
Reference Number(s): H237437
Part Features: Hard surfaced for prolonged wear - stationary/manual deck plate
Other Notes: For late model serial number 600 series SN(745101- )
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!