71364963NP -- Plastic Wear Tip for Polytin - Black $17.95
Models/Applications: 800 Series, 900 Series, 1000 Series, 40 Series, 974 Series, 843, 844, 863, 864, 883, 884, 943, 944, 963, 964, 983, 984, 1043, 1044, 1063, 1064, 1083, 1084, 443, 444, 643, 644, 843, 844, 1243, 1244, 974 Replaces: 71364963P
HSKK-AA0555A -- Kernel Keeper Kit for CA555 Chains - Single Row $195.00
Kernel Keeper Kit for CA555 Chains Kernel Keeper™ is the industry's most economical way to solve your shatter-loss/butt-shelling issues. With patented rails that act as a suspension system for your deck plates absorb the shock and "hold" loose kernels on the plate. From there, brushes mounted on each lug of the gathering chain sweep up any loose kernels into the auger bed. Showing similar results to the competition while coming in at least $500 LESS per row makes Kernel Keeper™ the best solution to loss and butt-shelling. Sold by the row. Each kit contains 2 rails, brushes for 2 chains, and necessary installation hardware. Models/Applications: Deere (40 & 90 Series), Case-IH (800, 900, & 1000) Series, New Holland (974, 996, 96C, 98C, 98D, through 2010 Corn Heads, 996) Clarke (All NON-15" corn heads)           FAQ's: 1. How much to break even? Beta testing has shown Kernel Keeperâ„¢ can pay for itself by saving JUST 2 kernels per 6 square feet. That's ONLY 1/3 of a bushel per acre. 2. How long do they last? A. Testing has shown a life greater than 150 acres per row B. Example of total life: 6 Row = 900 Acres, 8 Row = 1200 Acres, 12 Row = 1800 Acres 3. "Sounds fancy, but during a normal year how much money do I save? A. Using corn prices of $5.00 per bushel, a 6-row corn head, and a savings of just ONE bushel per acre, you will NET $3,330 (or $555/row) over the life of the product. For the mathematically inclined, that's a net return of 285%! 4. Why plastic rails? Well...technically it's Ultra High Molecular Weight Polyethylene. This material has a proven track record in abrasive wear situations. Additionally, it provides a much softer landing for the ear, allowing for the transfer of energy to the dampening pocket. 5. Why is the rail offset from the deck plates? The stalk-facing edge of the deck plate is often hard-faced with weld. By offsetting the Kernel Keeper™ edge, the majority of the wear is still against the hardened deck plate, increasing the life of the product. 6. My gathering chain rides tightly on the Kernel Keeper™ rail, will this damage my sprockets and chains? No, the gathering chain will ride higher on the front sprocket due to the addition of the Kernel Keeper™ rail. This will not affect the life of your chains and sprockets. 7. When do you plan to offer pre-drilled deck plates? We plan to have pre-drilled deck plates in the near future. When that time comes, we will continue to offer both solutions, allowing the grower to enjoy the benefits of Kernel Keeper™ without HAVING to buy new deck plates.
PW31-R -- 30" Center Snout RH Wear Strip SS $23.83
Models/Applications:800 Series, 900 Series, 1000 Series, 40 Series, 974 Series, 843, 844, 863, 864, 883, 884, 943, 944, 963, 964, 983, 984, 1043, 1044, 1063, 1064, 1083, 1084, 443, 444, 643, 644, 843, 844, 1243, 1244 Replaces:
PW31-L -- 30" Center Snout LH Wear Strip SS $23.83
Models/Applications:800 Series, 900 Series, 1000 Series, 40 Series, 974 Series, 843, 844, 863, 864, 883, 884, 943, 944, 963, 964, 983, 984, 1043, 1044, 1063, 1064, 1083, 1084, 443, 444, 643, 644, 843, 844, 1243, 1244 Replaces:
HDK-IK2 -- Hydraulic Deck Plate Indicator Assembly IH & JD Kit $208.55
Hydraulic Deck Plate Indicator Assembly IH & JD Kit Application: IH / JD Hydraulic Deck Plate Kits
AN102448-N -- Idler Sprocket - Non-Greaseable $13.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 1244, 2206, 2208, 2212, 3206, 3208, 3212, 3406, 3408, 3412, 974, 493, 494, 693, 694, 893, 894, 1293, 1294 OEM Brand: IH, JD, NH Reference Number(s): AN102448, 587300, 745023, 745023, 176283C91, 84549635, 86583947, 87034967 Material: Non-greaseable idler sprocket - 8 teeth - CA555 Chain Other Notes: 2 idler sprockets required per row
W10000016A -- PTO Shaft & Hanger Kit Hex Both Ends $454.31
Models/Applications:800 Series, 900 Series, 1000 Series, 40 Series, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 844, 1244 Replaces:
AN102009-N -- Gathering Chain - HARDENED Pins $37.00
Application/Models: 243, 244, 343, 344, 443, 444, 493, 494, 543, 546, 594, 642, 643, 644, 645, 692, 693, 694, 842, 843, 844, 892, 893, 894, 243, 1290, 1291, 1294, 544 OEM Brand: JD  Application/Models: 1043, 1044, 1054, 1063, 1064, 1083, 1084, 2206, 2208, 2212, 800, 823, 824, 833, 834, 843, 844, 853, 854, 863, 864, 873 OEM Brand: IH Application/Models: 96C1220, 96C1222, 96C1230, 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 974, 98C1220, 98C1222, 98C1230, 996N6 OEM Brand: FRD / NH Reference Number(s): AN102009, 113399rR91, 176279C91, AH91367, AH229064, 2221-32821, B1SB251, 176279C91, 251-E, 1306953C91, 610831, , 1133997R1 Part Features: Hardened pins for extended wear
AN102009-6L -- Gathering Chain - 6 Lugs - CHROME Pins $41.50
Application/Models: 243, 244, 343, 344, 443, 444, 493, 494, 543, 546, 594, 642, 643, 644, 645, 692, 693, 694, 842, 843, 844, 892, 893, 894, 243, 1290, 1291, 1294, 544 OEM Brand: JD  Application/Models: 1043, 1044, 1054, 1063, 1064, 1083, 1084, 2206, 2208, 2212, 800, 823, 824, 833, 834, 843, 844, 853, 854, 863, 864, 873 OEM Brand: IH Application/Models: 96C1220, 96C1222, 96C1230, 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 974, 98C1220, 98C1222, 98C1230, 996N6 OEM Brand: FRD / NH Reference Number(s): AN102009, 113399rR91, 176279C91, AH91367, AH229064, 2221-32821, B1SB251, 176279C91, 251-E, 1306953C91, 610831, , 1133997R1 About This Part: This 6-lug gathering chain was designed to help deal with the ever lingering problem of pulling too much trash into the corn head, and thus the feeder house of the combine. These chains can decrease the trash coming into the corn head by upwards of 40%! By operating with 6-lugs, rather than the normal 8-lugs, we are able to increase the window between lugs by 25%. Giving the stalk rolls more time to do their job - suck the trash down. This 6-lug chain acts similarly to a slow-down kit, but rather than having to the drive sprockets, idler sprockets, and chains - a farmer can get by with just purchasing chains. Thus offering a more cost-effective way to decrease trash - and increase yield. These chains are the best "bang for your buck" on the market AND they are CHROME pinned, offering a longer life than most other aftermarket chains!
208KRRB16 -- 1-1/4" Hex Bore Bearing 80mm $42.50
Models/Applications: 243, 244, 343, 344, 443, 444, 454, 493, 494, 543, 546, 594, 643, 644, 645, 653, 654, 692, 693, 694, 843, 844, 853, 892, 893, 894, 1243, 1290, 1291, 1293, 604C, 605C, 606C, 607C, 608C, 612C, 612FC, 616C, 618C, 708FC, C8F OEM Brand: JD or IH
80991005 - End Deflector Kit - Corn Head $165.00
End Deflector Kit - Corn Head *Sold as a single side

"And on the 8th day, God looked down on his planned paradise and said, "I need a caretaker." So, God made a Farmer." - Paul Harvey

FOLLOW US
WE ACCEPT Discover Mastercard Visa