Case-IH

This used OEM gearbox assembly for Case IH corn heads, fitting models 2606, 2608, 2612, 4406, 4408, and 4412. It has been inspected for quality and functionality to ensure reliable performance in the field. OEM Replacement – Designed to fit and function like the original Case IH part. Tested & Inspected – Each unit is checked to meet performance standards. Cost-Effective Solution – Get OEM quality at a fraction of the price of new components. Reference Numbers: 32251500, 322592700 Knives NOT included 

The LANCIHTH1910 is a heavy duty folding and telescoping hitch for Case IH® 7120, 8120, 9120, 7230, 8230, 9230, 7240, 8240, 9240, 7250, 8250, 9250 Series combines and like model New Holland® combines. This hitch DOES NOT fit Case IH® x130, x140 or x150 (and like model New Holland) Series Combines. The hitch is designed to mount to the left side of the combine rear axle. The LANCIHTH1910 is available with a standard clevis hitch (LANTH1451KBLK), or a heavy duty 15 ton pintle hitch (LAN10040K). Both options are NOT included in the above listed price. Call Lankota for details. LANCIHTH1910 features: Telescopes 20" for easy hookup Swivel tube has three positions Extends 5.5' behind the rear axle High strength 4" x 4" x ⅜" box tubing Installation Instructions

Attach any header to a CNH® combine with the LAN2P5065-2AFC. Simply connect the header hydraulic lines to this block and mount to the header. The LAN2P5065-2AFC will work with newer single point Case IH® and New Holland® combines.

The LANSS24608 is a complete Stalk Stomper® mount, hardware and shoe with poly kit for ONE row. This kit will fit Case® 4400 Series & like model New Holland® corn heads. The Stalk Stomper® poly liner is 1/4" thick and held to the main shoe with carriage bolts. No tools required to remove shoe from mount if needed. For 4412 30" corn heads, also order (1) LANSS4613 kit for use with rows 1 & 12. Installation Instructions

The LANAUGCIH1400 is an auger extension kit for Case IH® Combines with 14" augers. Lankota auger extension kits allow farmers to run wider headers and still unload on the go. For extension lengths, see the model and serial number chart below. LANAUGCIH1400 Combine Models and Serial # Splits Creates a 34" Extension Creates an 18" Extension Model Serial #'s Serial #'s 5088 Up to Y9G002055 Y9G002055 and up 6088 7088 7010 Up to year 2006 Not Available 8010 7120 Up to Y9G206759 Y9G206759 and up 8120 9120 30, 40 & 50 Series Not Available All This kit may require the purchase of a new Case IH® spout, factory part number 84219375. ONLY works with 14" diameter augers Does NOT work on combines with adjustable unloading auger spout For Case IH 1466-2588 combines, order the LANAUGCIHK 1466-2588 combines, order the LANAUGCIHK Installation Instructions

Product Description The LANAUGCIHK is a 3 foot unloading auger extension for Case IH® 1440-2388 combines. This kit allows farmers to run wider headers and still unload on the go. For Case IH® 10 & 20 Series Combines, order the LANAUGCIH1400 Installation Instructions

Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 1244, 2206, 2208, 2212, 3206, 3208, 3212, 3406, 3408, 3412, 974, 493, 494, 693, 694, 893, 894, 1293, 1294 OEM Brand: IH, JD, NH Reference Number(s): AN102448, 587300, 745023, 745023, 176283C91, 84549635, 86583947, 87034967 Material: Non-greaseable idler sprocket - 8 teeth - CA555 Chain Other Notes: 2 idler sprockets required per row MADE IN THE USA!!!

Sprocket Assembly for CNH Cornheads (Single Double) Models/Applications:  Case IH® Cornheads - 240630, 240636, 240638, 240670, 240822, 240830, 240836, 240838, 240870, 241220, 241222, 241230 New Holland® Cornheads - 98C630, 98C636, 98C822, 98C830, 98C836, 98C1220, 98C1222, 98C1230 Replaces: 87283939

Models/Applications: 1063 OEM Brand: IH  Part Features: Tracker Kit should only be used on a 1063 Corn Head. PTO-Shaft Included! PTO Drive Shaft: 1-1/8'' Hex Coupler End 1-1/8'' Hex Clamp End (33" - OAL) *If you need a different PTO Drive Shaft please contact us! 

Models/Applications: 1083 OEM Brand: IH Part Features: Tracker drive kit to be used on 1083 Case-IH corn head - PTO Shaft included!  PTO Drive Shaft - 1-1/8'' Hex Coupler End 1-1/8'' Hex Clamp End (33" - OAL) *If you need a different PTO Drive Shaft please contact us! 

Models/Applications: 3206, 3208, 3212, 3406, 3408, 3412 OEM Brand: CNH Reference Number(s): 87598741 Part Features: Heat treated and tungsten coated knife edge for extended wear Material: USA Steel MADE IN THE USA!

CNH Corn Head Gathering Chain Models/Applications:  Case IH®Cornheads 2011 and Later ASN HAJ0003469 - 2206, 2208, 2212 Cornheads 2011 and Later - 240630, 240636, 240638, 240670, 240822, 240830, 240836, 240838, 240870, 241220, 241222, 241230, 320630, 320636, 320638, 320670, 320822, 320830, 320836, 320838, 320870, 321220, 321222, 321230, 340630, 340636, 340638, 340670, 340822, 340830, 340836, 340838, 340870, 341220, 341222, 341230, 341630, 341820 New Holland®Cornheads 2011 and Later - 96C430, 96C436, 96C536, 96C630, 96C636, 96C820, 96C822, 96C830, 96C836, 96C1220, 96C1222, 96C1230, 98D0630, 98D0636, 98D0822, 98D0830, 98D0836, 98D1220, 98D1222, 98D1230, 98D1630, 98D1820

Models/Applications: 243, 244, 343, 344, 443, 444, 454, 493, 494, 543, 546, 594, 643, 644, 645, 653, 654, 692, 693, 694, 843, 844, 853, 892, 893, 894, 1243, 1290, 1291, 1293, 604C, 605C, 606C, 607C, 608C, 612C, 612FC, 616C, 618C, 708FC, C8F OEM Brand: JD or IH

Grain Tank Auger Floor Liner Kit, Stainless Steel Models/Applications: 1440, 1460, 1480, 1640, 1644, 1660, 1666, 1680, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588 Replaces: 87561634 Enhance the durability and efficiency of your grain tank with the Grain Tank Auger Floor Liner Kit (AM87561634). Designed to fit seamlessly, this high-quality liner kit provides essential protection against wear and tear. Constructed from robust, long-lasting stainless-steel, it stands up to the harshest conditions and gets you more "bang-for-your-buck." Easy to install and maintain, this kit ensures smooth operation and optimal performance, keeping your grain tank in top condition.

Models/Applications: 2206, 2208, 2212, 2406, 2408, 2412, 2606, 2608, 2612, 3406, 3408, 3412, 996, 96C, 98C, 98D  OEM Brand: IH & NH Part Notes: SS wear strip that mounts onto the divider hood  Material: SS MADE IN THE USA!