BUNDLE WEEK

Refresh your Case IH® 2000 & 3000 Series corn head with this poly-only replacement bundle. Each kit includes the snout and divider hood for one row, built from durable poly to reduce weight and improve wear performance. Fits Case IH® 2000 & 3000 Series  corn heads Includes 1 Snout + 1 Divider Hood per row Poly only – internal frame components not included Manufactured with tough, UV-resistant poly for long-lasting performance Reduces cracking, denting, and corrosion compared to OEM materials Lightweight design improves handling and reduces stress on the head Direct-fit OEM replacement for an updated, clean look Sold per row – order the correct quantity to match your corn head. Kit Includes: 86980207-N (1) 87028633-N (1)

Restore your John Deere® 90 Series corn head with this poly bundle built for early serial numbers (up to SN 695300). Each bundle provides the snout and divider hood for one row, delivering durability, fit, and performance that meets or exceeds OEM standards. Fits John Deere® 90 Series corn heads (Early SN: up to 695300) Includes 1 Snout + 1 Divider Hood per row High-strength poly resists cracking, UV damage, and wear Lightweight design for easier handling and reduced stress on the head Reliable OEM replacement at a better value Sold per row – order the correct quantity to match your corn head. Kit Includes: AH146577-N (1) AH160065-N (1)

Kit Includes: 1327204C1-N (x1) - Stalk Roll Shaft Support - Left Hand 1327205C1-N (x1) - Stalk Roll Shaft Support - Right Hand 1327208C1-N (x1) - Stalk Roll Auger & Shaft Assembly (Left Hand with Bearing) 1327209C1-N (x1) - Stalk Roll  Auger & Shaft Assembly (Right Hand with Bearing) P1/2x21/2SH5C (x2) - Stalk Roll Set Screw Square Head 199806C1-N (x4) - Stalk Roll Shim Large - .032" 199408C1-N (x4) - Stalk Roll Shim Small - .032" 1327159C1-N (x4) - Stalk Roll Shim Small - .010" 1327126C1-N (x8) - IH 900-1000 Series Stalk Roll Knife 176301C1-N (x2) - Snapping Roll Drive Coupler P1/2x1CS8C (x22) - 1/2 x 1 Grade 8 Cap Screw P1/2FW8 (x30) - IH Stalk Roll Washer P1/2LW (x6) - 1/2" Lock Washer P1/2x23/4CS8 (x4) - 1/2x 2-3/4 Grade 8 Cap Screw P1/2NG8 (x4) - 1/2" Grade 8 Nut Models/Applications: 800 Series,900 Series,1000 Series, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084

Fits Models: 2206, 2208, 2212, 2406, 2408, 2412Includes: Replacement Knife Roll Components (excluding the cast piece inside the tube)Note: Cast tube insert not included. Description: This replacement kit is designed for Case-IH® 2200 and 2400 Series corn heads, offering a direct-fit solution for worn or damaged knife rolls. Built to match OEM specifications, it restores chopping performance and feed quality. Benefits: High-quality aftermarket replacement Saves time and money by replacing only what’s needed Compatible with multiple row configurations (6, 8, and 12-row heads) Pre-boxed for convenience

Models/Applications:443, 643, 843, 1243, 444, 644, 844, 1244, 493, 494, 592, 693, 694, 893, 894, 1092, 1290, 1291, 1293 Replaces:

Description: John Deere® 90 Series Early SS Patch Kit (1 PER ROW) Fitments: 90 Series / 493, 693, 893, 1293 (EARLY) OEM Brand: John Deere® KIT Includes:  AH146577WSL (1x) AH146577WSR (1x) AH160065WS (2x) MADE IN THE USA! 

Description: IH 1000 Series Chain & Sprocket Kit (1 Per Row) - Non-Greaseable Sprockets Fitments: 1043, 1063, 1083, 1043  OEM Brand: Case IH® KIT Includes:  AN102009-N (2) AH101219-N (2) 199497C1-G (2)

Models/Applications:800 Series, 900 Series, 1000 Series, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084 Kit Includes:  1327204C1-N (x1) - Stalk Roll Shaft Support - Left Hand 1327205C1-N (x1) - Stalk Roll Shaft Support - Right Hand 1327208C1-N (x1) - Stalk Roll Auger & Shaft Assembly (Left Hand with Bearing) 1327209C1-N (x1) - Stalk Roll  Auger & Shaft Assembly (Right Hand with Bearing) P1/2x21/2SH5C (x2) - Stalk Roll Set Screw Square Head 199806C1-N (x4) - Stalk Roll Shim Large - .032" 199408C1-N (x4) - Stalk Roll Shim Small - .032" 1327159C1-N (x4) - Stalk Roll Shim Small - .010" 176301C1-N (x2) - Snapping Roll Drive Coupler P1/2x1CS8C (x22) - 1/2 x 1 Grade 8 Cap Screw P1/2FW8 (x30) - IH Stalk Roll Washer P1/2LW (x6) - 1/2" Lock Washer P1/2x23/4CS8 (x4) - 1/2x 2-3/4 Grade 8 Cap Screw P1/2NG8 (x4) - 1/2" Grade 8 Nut

Models/ Applications: 493, 494, 592, 693, 694, 893, 894, 1092, 1290, 1291, 1293, CLARKE OEM Brand: JD / CLARKE Part Features: Designed for no-till farmers that require maximum decomposition across a broad range of conditions - this is not a substitute for a "chopping" head Kit Includes: Cast augers made of USA Ductile Iron, tubes made of USA Steel, knives that are hardened, and tungsten coated, for extra wear, and mounting hardware Other Notes: Knives are reversible and can be replaced without having to remove the whole roll Warning: Do not use this part number on JD 40 series corn heads (443, 444, 643, 644, 843, 844, 1243, 1244). You will run a high risk of pinion housing failure. Use part number: KIT99991885 for JD 40 series corn heads.   

Description: JD 600 Series Wear Parts Kit - EARLY SN( -745101) - Deck Plates,  Idler Blocks (1 Per Row) Fitments: 600 Series / 606, 608, 612 OEM Brand: John Deere® 600 Series KIT Includes:  AH232250-N  H225719-N H237885-N H237841-N The JD 600 Series Wear Parts Kit – EARLY SN (-745101) is built to keep your John Deere® 600 Series corn head performing at its best. Designed for models 606, 608, and 612, this kit includes deck plates and idler blocks, which are critical for proper crop flow and consistent feeding. By replacing these high-wear components together, farmers can reduce crop loss, maintain smoother operation, and prevent costly downtime during harvest. It’s a reliable, all-in-one solution to keep your header running efficiently in the field.

Description: JD 600 Series Wear Parts Kit - EARLY SN( -745101) - Deck Plates,  Idler Blocks (1 Per Row) Fitments: 600 Series / 606, 608, 612 OEM Brand: John Deere® 600 Series KIT Includes:  AH232250-N  H225719-N H237885-N H237841-N The JD 600 Series Wear Parts Kit – EARLY SN (-745101) is built to keep your John Deere® 600 Series corn head performing at its best. Designed for models 606, 608, and 612, this kit includes deck plates and idler blocks, which are critical for proper crop flow and consistent feeding. By replacing these high-wear components together, farmers can reduce crop loss, maintain smoother operation, and prevent costly downtime during harvest. It’s a reliable, all-in-one solution to keep your header running efficiently in the field.

Description: JD 40 & 90 Series Chain & Sprocket Kit (1 Per Row) - Non-Greaseable Sprockets Fitments: 40 Series & 90 Series / 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294 OEM Brand: John Deere® KIT Includes:  AN102009-N (2x) H85252-G (2x) AH101219-N (2x)

Description: POLYTIN™ 30'' SS Patch Kit Fitments: 800 Series & 900 Series & 1000 Series & 40 Series & 974 Series / 863, 883, 943, 963,  964,  983, 1043, 1063, 1083, 643, 843, 1243 OEM Brand(s): Case IH® & John Deere® (POLYTIN™) KIT Includes:  PW31-L(1x) PW31-R(1x) PD30WS(2x) MADE IN THE USA!

Description: CNH 2000, 3000, NH Series SS Patch Kit (1 PER ROW) Fitments: 2206, 2208, 2212, 2406, 2408, 2412, 2606, 2608, 2612, 3206, 3208, 3212, 3406, 3408, 3412 - 30", 36", & 38" Row Spacing OEM Brand(s): Case IH - New Holland® KIT Includes:  87528030-N (1x) 86980207WSR (1x) 86980207WSL (1x) MADE IN THE USA!

Description: John Deere 600, 700, C Series SS Patch Kit (1 PER ROW) Fitments: 606, 606C, 608, 608C, 612, 612C, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C12F, C16R, C18R OEM Brand: John Deere® KIT Includes:  AXE10906WSB AXE10905WSL AXE10905WSR MADE IN THE USA!