Products

The LANTH1451K is a bolt-on clevis hitch and hardware option for the LANTH400, LANTH620 and LANTH910 Lankota trailer hitches.

The LANTH1451KBLK is a bolt-on clevis hitch and hardware option for the LANCIHTH1910 and LANTH1500 trailer hitches.

The LANTH1500 is a 4 foot, heavy duty solid hitch for Case IH® 7120, 8120, 9120, 7230, 8230, 9230, 7240, 8240, 9240, 7250, 8250, 9250 Series combines and like model New Holland® combines. This hitch DOES NOT fit Case IH® x130, x140 or x150 (and like model New Holland) Series Combines. This hitch is designed to specifically mount to the left side of the combine rear axle. The hitch attaches with five factory bolts utilizing pre-existing bolt holes in the axle. The LANTH1500 is available with a standard clevis hitch (LANTH1451KBLK), or a heavy duty 15 ton pintle hitch (LAN10040K). Both options are NOT included in the above listed price. Call VH MFG for details. Installation Instructions

The LANTH21387 is a heavy duty folding and telescoping hitch for John Deere® X9 Series combines. The hitch is designed to mount to the left side of the combine rear axle. When extended in the transport position, this hitch extends eight feet from the back of the rear combine axle to the center of the hitch pin hole. The LANTH21387 is available with a standard clevis hitch (LANTH1451K), or a heavy duty 15 ton pintle hitch (LAN10040K). Neither option is included in the above listed price. Call VH MFG for details. Installation Instructions *You should plan approximately 2 hours to install this unit ** A required hitch option (LANTH1451K or LAN10040K) is NOT included in the listed price

The LANTH400 is a 6 foot, heavy duty solid hitch for John Deere® 70 and S Series combines. This hitch is specifically designed to mount to the left side of the combine rear axle. The LANTH400 attaches with six 20mm steel bolts (included) by utilizing pre-existing bolt holes in the axle. The LANTH400 is available with a standard clevis hitch (the LANTH1451K shown in above images), or a heavy duty 15 ton pintle hitch (LAN10040K). Both options are NOT included in the above listed price. Call Lankota for details. Lankota also offers a folding hitch (LANTH620) and a folding & telescoping hitch (LANTH910). Installation Instructions A required hitch option (LANTH1451K or LAN10040K) is NOT included in the above listed price

The LANTH620 is a heavy duty folding hitch for John Deere® 70 and "S" Series combines. The hitch is designed to mount to the left side of the combine rear axle. The LANTH620 is available with a standard clevis hitch (the LANTH1451K shown in above images), or a heavy duty 15 ton pintle hitch (LAN10040K). Both options are NOT included in the above listed price. Call VH MFG for details. LANTH620 features: Swivel tube can fold out of the way under the combine when not in use Extends 5.8' behind rear axle (retracted) High strength 4" x 4" x ⅜" box tubing For a hitch that folds and telescopes, order the LANTH910. Installation Instructions

The LANTH910 is a heavy duty folding and telescoping hitch for John Deere® 70 and "S" Series combines. The hitch is designed to mount to the left side of the combine rear axle. The LANTH910 is available with a standard clevis hitch (LANTH1451K), or a heavy duty 15 ton pintle hitch (LAN10040K). Both options are NOT included in the above listed price. Call Lankota for details. LANTH910 features: Telescopes 20" for easy hookup Swivel tube can fold out of the way under the combine when not in use Extends 5.8' behind rear axle (retracted) High strength 4" x 4" x ⅜" box tubing Installation Instructions

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD1000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD1000K fits John Deere® HUR combine models 9560 - S770. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2   Recommended Seasonal Maintenance

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD2000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD2000K fits John Deere® combine models S680, S780, S690, & S790. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 *HUR= High Unload Rate   Lankota Seasonal Recommended Maintenance Video

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD3000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD3000K fits John Deere® NON-HUR combine models 60 - S770, and all 50 Series STS combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2   Recommended Seasonal Maintenance

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD4000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD4000K fits John Deere® combine models 00, 10,and all 50 Series Walker combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 HUR = High Unload Rate Recommended Seasonal Maintenance Video

Landbouw™ Snow Pusher - 8'  Color: Red Adjustable 3/8 GR80 Blade  Bolt on Skids Heavy Duty Designed Snow Pusher made in the USA!   

Description: 8' Snow Pusher for Payloader Bucket (Universal Attach Style) MADE IN THE USA! 

Fits End C-IH and NH Draper Platforms, MacDon Auger, Draper and Mower Conditioner Platforms, JD Auger and Draper Platforms, Replaces MacDon 118301, JD FH318317, C-IH 847709129, 87422039. Name Value Guard Series 641 Series Number of Points 2-Point German Made No Heat Treatment Heat Treated Color Black Brand AgSmart Make Case IH Make Ford_New Holland Make John Deere Make Macdon Model 1052 Model 2042 Model 2052 Model 2062 Model 2142 Model 2152 Model 2162 Model 84C Model 86C Model 140 Model 140A Model 160A Model 180A Model 400D Series Model A30D Model A30S Model A40D Model 972 Model 973 Model 974 Model D125 Model D50 Model D60 Model D65 Model FD125 Model FD130 Model FD135 Model FD140 Model FD145 Model FD70 Model FD75 Type Combine Header Type Auger Header Category1 Cutting Parts Category2 Guards