Products

Product Description The LANSRCIHM3 is a unique alternative to save wear on tires of tractors, planters, grain carts and any other piece of equipment that may travel over treacherous stalks. Independent roller travel, hydraulic lifted. Does not lose ground clearance. Diameter of roller is 14 inches. Width of roller is 52 inches. Will add 1380 lbs of weight to the front end. Weight removal may be required. This kit will work with small weight bracket, but WILL NOT work with large weight bracket (CIH® part number 48152101). The LANSRCIHM3 fits on the following Case IH® Magnum™ tractor models: 180, 190, 200, 210, 215, 220, 225, 240, 245, 275, 305 & 335.

The LANSRCIHM4 is a unique alternative to save wear on tires of tractors, planters, grain carts and any other piece of equipment that may travel over treacherous stalks. Independent roller travel, hydraulic lifted. Does not lose ground clearance. Diameter of roller is 14 inches. Width of roller is 52 inches. Will add 1380 lbs of weight to the front end. Weight removal may be required. The LANSRCIHM4 fits on the following Case IH® Magnum™ tractor models: 235, 250*, 260, 280, 290, 310, 315, 340, 370, 380 & 400. Model year 2012 and newer Installation Instructions *Expect roughly 8 hours for installation of this product

The LANSRCIHM4 is a unique alternative to save wear on tires of tractors, planters, grain carts and any other piece of equipment that may travel over treacherous stalks. Independent roller travel, hydraulic lifted. Does not lose ground clearance. Diameter of roller is 14 inches. Width of roller is 52 inches. Will add 1380 lbs of weight to the front end. Weight removal may be required. The LANSRCIHM4 fits on the following Case IH® Magnum™ tractor models: 235, 250*, 260, 280, 290, 310, 315, 340, 370, 380 & 400. * Model year 2012 and newer

The LANSRCIHMX is a unique alternative to save wear on tires of tractors, planters, grain carts and any other piece of equipment that may travel over treacherous stalks. Independent roller travel, hydraulic lifted. Does not lose ground clearance. Diameter of roller is 14 inches. Width of roller is 52 inches. Will add 1400 lbs. of weight to the front end. Some weight removal may be required. This kit WILL NOT work with larger weight bracket (CIH® part number 238518A2), but will fit if weight bracket is removed. Installation Instructions *Expect roughly 8 hours for installation of this product

Extend the life of your tractor tires with Lankota's Stalk Roller system for Case® & New Holland® large articulated tractors. The 52-inch wide roller will greatly lessen tire damage done by any crop stalk. The 14-inch diameter rollers crush sharp and abrasive crop residue in front of the tractor tires. The system folds and unfolds hydraulically from the cab. If available, use a separate hyd. remote for these functions or tie them directly in with your implement lift. Use the following table to determine which kit number to order, based on your tractor series, tire size, and configuration: NARROW Frame Case IH® & New Holland® 4WD Tractors Tire Configuration Case IH® Quadtrac 420, 470†, Case IH® Rowtrac 400, 420, 450, 470, 500 Case IH® Wheeled 350, 370, 400, 420, 450, 470 New Holland® SmartTrax II T9.530, T9.565 New Holland® Wheeled T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565 No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights Triples480mm & 520mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Duals480mm & 520mm N/A N/A LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W Duals620mm & 650mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Duals710mm & 800mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Singles800mm N/A N/A LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W Tracks18" - 36" LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W N/A N/A • Narrow Frame Tractors with front ballast - order LANSR20343W or LANSR20348W• The LANSR20343 & LANSR20343W have 52" wide rollers, while the LANSR20348 & LANSR20348W have 74" wide rollers WIDE Frame Case IH® & New Holland® 4WD Tractors Tire Configuration Case IH® Quadtrac 450, 470†, 500, 540, 550, 580, 600, 620 Case IH® Wheeled 500, 540, 550, 580, 600, 620 New Holland® SmartTrax II T9.600, T9.645, T9.700 New Holland® Wheeled T9.600, T9.615, T9.645, T9.670, T9.700 No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights Triples480mm & 520mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Duals480mm & 520mm N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W Duals620mm & 650mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Duals710mm & 800mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Singles800mm N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W Tracks18" - 36" LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A Wide Frame Tractors with front ballast - order LANSRCNH52W or LANSRCNH74WThe LANSRCNH52 & LANSRCNH52W have 52" wide rollers, while the LANSRCNH74 & LANSRCNH74W have 74" wide rollers † 470 Quadtrac could be narrow or wide frame, contact your dealer to check build codes  None of these stalk roller kits fit on STX Steiger Tractors Installation Instructions *Expect roughly 8 hours for installation of this product

Extend the life of your tractor tires with Lankota's Stalk Roller system for Case® & New Holland® large articulated tractors. The 52-inch wide roller will greatly lessen tire damage done by any crop stalk. The 14-inch diameter rollers crush sharp and abrasive crop residue in front of the tractor tires. The system folds and unfolds hydraulically from the cab. If available, use a separate hyd. remote for these functions or tie them directly in with your implement lift. Use the following table to determine which kit number to order, based on your tractor series, tire size, and configuration: NARROW Frame Case IH® & New Holland® 4WD Tractors Tire Configuration Case IH® Quadtrac 420, 470†, Case IH® Rowtrac 400, 420, 450, 470, 500 Case IH® Wheeled 350, 370, 400, 420, 450, 470 New Holland® SmartTrax II T9.530, T9.565 New Holland® Wheeled T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565 No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights Triples480mm & 520mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Duals480mm & 520mm N/A N/A LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W Duals620mm & 650mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Duals710mm & 800mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Singles800mm N/A N/A LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W Tracks18" - 36" LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W N/A N/A • Narrow Frame Tractors with front ballast - order LANSR20343W or LANSR20348W• The LANSR20343 & LANSR20343W have 52" wide rollers, while the LANSR20348 & LANSR20348W have 74" wide rollers WIDE Frame Case IH® & New Holland® 4WD Tractors Tire Configuration Case IH® Quadtrac 450, 470†, 500, 540, 550, 580, 600, 620 Case IH® Wheeled 500, 540, 550, 580, 600, 620 New Holland® SmartTrax II T9.600, T9.645, T9.700 New Holland® Wheeled T9.600, T9.615, T9.645, T9.670, T9.700 No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights Triples480mm & 520mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Duals480mm & 520mm N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W Duals620mm & 650mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Duals710mm & 800mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Singles800mm N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W Tracks18" - 36" LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A Wide Frame Tractors with front ballast - order LANSRCNH52W or LANSRCNH74WThe LANSRCNH52 & LANSRCNH52W have 52" wide rollers, while the LANSRCNH74 & LANSRCNH74W have 74" wide rollers † 470 Quadtrac could be narrow or wide frame, contact your dealer to check build codes  None of these stalk roller kits fit on STX Steiger Tractors Installation Instructions *Expect roughly 8 hours for installation of this product

Extend the life of your tractor tires with Lankota's Stalk Roller system for Case® & New Holland® large articulated tractors. The 74-inch wide roller will greatly lessen tire damage done by any crop stalk. The 14-inch diameter rollers crush sharp and abrasive crop residue in front of the tractor tires. The system folds and unfolds hydraulically from the cab. If available, use a separate hyd. remote for these functions or tie them directly in with your implement lift. Use the following table to determine which kit number to order, based on your tractor series, tire size, and configuration: NARROW Frame Case IH® & New Holland® 4WD Tractors Tire Configuration Case IH® Quadtrac 420, 470†, Case IH® Rowtrac 400, 420, 450, 470, 500 Case IH® Wheeled 350, 370, 400, 420, 450, 470 New Holland® SmartTrax II T9.530, T9.565 New Holland® Wheeled T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565 No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights Triples480mm & 520mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Duals480mm & 520mm N/A N/A LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W Duals620mm & 650mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Duals710mm & 800mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Singles800mm N/A N/A LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W Tracks18" - 36" LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W N/A N/A • Narrow Frame Tractors with front ballast - order LANSR20343W or LANSR20348W• The LANSR20343 & LANSR20343W have 52" wide rollers, while the LANSR20348 & LANSR20348W have 74" wide rollers WIDE Frame Case IH® & New Holland® 4WD Tractors Tire Configuration Case IH® Quadtrac 450, 470†, 500, 540, 550, 580, 600, 620 Case IH® Wheeled 500, 540, 550, 580, 600, 620 New Holland® SmartTrax II T9.600, T9.645, T9.700 New Holland® Wheeled T9.600, T9.615, T9.645, T9.670, T9.700 No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights Triples480mm & 520mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Duals480mm & 520mm N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W Duals620mm & 650mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Duals710mm & 800mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Singles800mm N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W Tracks18" - 36" LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A Wide Frame Tractors with front ballast - order LANSRCNH52W or LANSRCNH74WThe LANSRCNH52 & LANSRCNH52W have 52" wide rollers, while the LANSRCNH74 & LANSRCNH74W have 74" wide rollers † 470 Quadtrac could be narrow or wide frame, contact your dealer to check build codes  None of these stalk roller kits fit on STX Steiger Tractors Installation Instructions *Expect roughly 10 hours for installation of this product

Extend the life of your tractor tires with Lankota's Stalk Roller system for Case® & New Holland® large articulated tractors. The 74-inch wide roller will greatly lessen tire damage done by any crop stalk. The 14-inch diameter rollers crush sharp and abrasive crop residue in front of the tractor tires. The system folds and unfolds hydraulically from the cab. If available, use a separate hyd. remote for these functions or tie them directly in with your implement lift. Use the following table to determine which kit number to order, based on your tractor series, tire size, and configuration: NARROW Frame Case IH® & New Holland® 4WD Tractors Tire Configuration Case IH® Quadtrac 420, 470†, Case IH® Rowtrac 400, 420, 450, 470, 500 Case IH® Wheeled 350, 370, 400, 420, 450, 470 New Holland® SmartTrax II T9.530, T9.565 New Holland® Wheeled T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565 No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights Triples480mm & 520mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Duals480mm & 520mm N/A N/A LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W Duals620mm & 650mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Duals710mm & 800mm N/A N/A LANSR20348 LANSR20348W N/A N/A LANSR20348 LANSR20348W Singles800mm N/A N/A LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W Tracks18" - 36" LANSR20343 LANSR20343W N/A N/A LANSR20343 LANSR20343W N/A N/A • Narrow Frame Tractors with front ballast - order LANSR20343W or LANSR20348W• The LANSR20343 & LANSR20343W have 52" wide rollers, while the LANSR20348 & LANSR20348W have 74" wide rollers WIDE Frame Case IH® & New Holland® 4WD Tractors Tire Configuration Case IH® Quadtrac 450, 470†, 500, 540, 550, 580, 600, 620 Case IH® Wheeled 500, 540, 550, 580, 600, 620 New Holland® SmartTrax II T9.600, T9.645, T9.700 New Holland® Wheeled T9.600, T9.615, T9.645, T9.670, T9.700 No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights No Weights W/ Weights Triples480mm & 520mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Duals480mm & 520mm N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W Duals620mm & 650mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Duals710mm & 800mm N/A N/A LANSRCNH74 LANSRCNH74W N/A N/A LANSRCNH74 LANSRCNH74W Singles800mm N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W Tracks18" - 36" LANSRCNH52 LANSRCNH52W N/A N/A LANSRCNH52 LANSRCNH52W N/A N/A Wide Frame Tractors with front ballast - order LANSRCNH52W or LANSRCNH74WThe LANSRCNH52 & LANSRCNH52W have 52" wide rollers, while the LANSRCNH74 & LANSRCNH74W have 74" wide rollers † 470 Quadtrac could be narrow or wide frame, contact your dealer to check build codes  *None of these stalk roller kits fit on STX Steiger Tractors Installation Instructions **Expect roughly 10 hours for installation of this product

The LANSS11362 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2012+ John Deere® corn heads. This kit will fit any John Deere® factory corn head from 2012 and newer, including all spacing configurations of 600, 700 & C Series corn heads. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS86614) are interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

The LANSS1240/90R2 is a Lankota Stalk Stomper® mounting kit for a 12 row John Deere® 40/90 Series 30" corn head. The kit contains the toolbars, installation mounts, Stalk Stomper®mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stompers® (LANSS755) are not included in this kit, and are sold separately. *Expect roughly 2 hours for installation of this product Installation Instructions

The LANSS1240/90R4 is a Lankota Stalk Stomper® mounting kit for a 12 row John Deere® 40/90 Series 30" corn head. The kit contains the toolbars, installation mounts, Stalk Stomper®mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stompers® (LANSS755) are not included in this kit, and are sold separately. *Expect roughly 2 hours for installation of this product Installation Instructions

The LANSS1240/90R6 is a Lankota Stalk Stomper® mounting kit for a 12 row John Deere® 40/90 Series 30" corn head. The kit contains the toolbars, installation mounts, Stalk Stomper®mounts, and hardware needed to prepare the header for Lankota Stalk Stompers®. Lankota Stalk Stompers® (LANSS755) are not included in this kit, and are sold separately. Installation Instructions

The LANSS14512 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2011 and older John Deere® 600 Series corn heads. This kit will fit any John Deere® factory 600 Series corn head, 2011 and older, accommodating all spacing configurations. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS21451) are interchangeable with John Deere® original shoe and mount. Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

The LANSS21421PK is a ¼" UHMW (Ultra High Molecular Weight) poly skid shoe for John Deere® OEM "Stalk Deflector" shoes as well as Lankota's Generation 3 Stalk Stomper shoe which provide added base longevity. Carriage bolts and lock nuts are included. This part number is for one (1) piece/row. Installation Instructions

The LANSS21466 is a double jack stand kit for John Deere® 600, 700, & C Series corn heads. This kit is recommended for any John Deere® 600, 700, & C Series corn heads equipped with Lankota Generation 3 Stalk Stompers® OR John Deere® OEM Stalk Deflectors. This stand kit will reduce excessive Stalk Stomper/Deflector spring tension during long periods of header storage. No drilling, cutting or welding required. Installation Instructions