Products

CAP W/ NOSE.3-3/8X12 SUBSOILER Brand AgSmart Width 3-3/8 Inch Length 12 Inch

CAP W/ NOSE.4-3/8X12 SUBSOILER Width 4-3/8 Inch Length 12 Inch

UNVERFERTH ZONE BUILDER POINT FITS MODELS 112, 122, AND 132. Material Hi-Strength Chrome Alloy Width 1-3/4 Inch Style Casted Brand AGRITUF Series Agrituf Application Ripper / Subsoiler Product Type Ripper Point For Shank Size 3/4 Inch

UNVERFERTH ZONE BUILDER SHIN FITS MODELS 112, 122, AND 132. Brand AGRITUF Application Ripper / Subsoiler Material Hi-Strength Chrome Alloy Product Type Shin Series Agrituf

Auger finger retainer 600 / 700 SeriesReplaces JD # H169912

Name Value Brand Weasler

Name Value Brand Weasler

Name Value Brand Weasler

Name Value Brand Weasler

Auto Lok 1-3/8” 6 spline tractor yoke for equal arm category 6 CV.  Auto-lock yokes keep the collar locked back in the released position to allow for easy hooking and unhooking of implements. When slid onto PTO shaft collar releases automatically locking the yoke on. Name Value UPC 728357403830 Brand Weasler

Description: Chaffer Tail Board Fitments: 9650STS, 9750STS, 9860STS, 9660STS, 9760STS, 9570STS, 9870STS, 9670STS, 9770STS OEM Reference Number: AXE10197 OEM Brand: John Deere® MADE IN THE USA!

Description: 600 / 700 Series / C Series - Center Snout 30'' Fitments: 606, 608, 612, 616, 706, 708, 712, 716, C6R, C8R, C12R, C16R OEM Brand: John Deere® OEM Reference Number: AXE10905 MADE IN THE USA!  This 30" Center Snout is a direct-fit replacement for John Deere® 600, 700, and C Series corn heads. Molded from durable, impact-resistant polyethylene, it’s built to handle tough harvesting conditions while maintaining smooth crop flow and long service life. Proudly Made in the USA, this snout delivers dependable performance with OEM-level fit and finish.

Description: Center Divider-Hood, 30" for John Deere® Cornhead Fitments: Cornheads ASN 745101 - 606, 606C, 608, 608C, 612, 612C  608FC (ASN 129189), 612FC, 616, 616C, 706C, 708C, 708FC, 712C, 712FC, 716C, C6R, C8R, C8F, C12F, C12R, C16F, C16R OEM Brand: John Deere® OEM Reference Number: AXE10906 MADE IN THE USA!  This Center Divider-Hood, 30" is designed for John Deere® cornheads, ensuring reliable performance and long-lasting durability in the field. Built to fit a wide range of models including 606, 608C, 612C, 708C, 712FC, and more, it directly replaces OEM part number AXE10906. Manufactured right here in the USA, this hood offers farmers a dependable, high-quality alternative to OEM parts—delivering strength, precision fit, and peace of mind at harvest.

Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 616C, 706, 706C, 708, 708C, 712, 712C, 716, 716C, 718, 718C, C6R, C8R, C12R, C12F, C16R, C16F, C18R OEM Brand: JD Reference Number(s):  Part Features: Stainless steel wear strip to help prolong the life of your divider by protecting the plastic from cracking Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it - get it free of any debris. Take some silicone and put about an 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.  Material: USA Stainless Steel Proudly Made In The USA! Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions. This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season. Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.

Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C16R, C18R OEM Brand: JD Reference Number(s): 83758 Part Notes: This part will cover, and replace, aftermarket poly patches. Stainless steel, these patches will not allow the screws to pull through the part while chaff builds up behind it. Kit includes screws to mount the wear strip.  Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it. Get it free of any debris. Take some silicone and put about 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.  Material: USA Stainless Steel PROUDLY MADE IN THE USA! Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions. This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season. Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.