9953RE -- HOWARD BLADE
$15.65
HOWARD BLADE
C" blade, left hand. Thickness 15/64", hole diameter 7/16", hole spacing 2-1/4"
Bolt Size
7/16"
Side
LH
Bolt Spacing
2-1/4"
Thickness
15/64"
9954RE -- HOWARD BLADE
$15.65
HOWARD BLADE
C" blade, right hand. Thickness 15/64", Hole diameter: 7/16", Hole spacing: 2-1/4"
Bolt Size
7/16"
Side
RH
Bolt Spacing
2-1/4"
Thickness
15/64"
99601558 -- Idler Sprocket #60 chain 15 tooth 5/8 hole
$20.90
Idler Sprocket #60 chain 15 tooth 5/8 hole
99601833-C -- Hydraulic Kit C - 60 Series - (Single Point)
$652.55
Hydraulic Kit C - 60 Series - (Single Point)
99770600 -- JD 600, 700, "C" Series to AFX Head Adapter
$3,175.00
Corn Head Brand: JD
Corn Head Models: 606, 606C, 608, 608C, 612, 612C, 616, 616C, 618, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C12F, C16R, C16F
Combine Brand: IH
Combine Models: 5088, 5130, 5140, 6088, 6130, 6140, 7088, 7130, 7140, 7010, 8010, 7120, 8120, 9120, 7230, 8230, 9230, 7240, 8240, 9240
Other Notes: Only works on "C" series corn heads if the filler plates are in place
Installation Notes: This adapter mounts into the feeder house section of the corn head using bolts. This kit requires cutting to the top corners of the feeder house to make room for the guides that help mount the IH feeder house of the combine into the corn head. Installation instructions are provided upon the delivery of this kit.
Proudly Made In The USA!
99770660 -- No Yokes 30'' Center of Joint to Center of Joint
$297.00
Application:
Walterscheid 2400 Series
Description:
No Yokes 30'' Center of Joint to Center of Joint
99771083 -- Adapter - 1000 Series Corn Head to AFX Flagship Combine
$3,850.00
Corn Head Brand: IH
Corn Head Models: 1063, 1083, 1064, 1084
Combine Brand: IH
Combine Models: 7010, 7120, 7230, 7240, 8010, 8120, 8230, 8240, 9120, 9230, 9240, 9250
Installation Notes: This adapter gets fabricated onto the feeder house section of the corn head. This kit requires a large amount of fabricating work. Such as, cutting and extending the intermediate drives, removing and installing new supports, and cutting away old sections of the back tin work. Installation instructions are provided upon the delivery of this kit.
Proudly Made In The USA!
99771210 -- No yokes 48'' Center of Joint to Center of Joint
$356.40
Application:
Walterscheid 2400 Series
Description:
No yokes 48'' Center of Joint to Center of Joint
99771460 -- JD Head to Standard IH Combine Adapter Assembly
$1,250.00
Corn Head Brand: JD
Corn Head Models: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294, 606, 606C, 608, 608C, 612, 612C, 616, 616C, 706, 706C, 708, 708C, 712, 712C, 716, 716C
Combine Brand: IH
Combine Models: 1420, 1440, 1460, 1470, 1480, 1482, 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1682, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388
Installation Notes: This adapter mounts into the feeder house section of the corn head using bolts. Minimal, to no, fabrication required. Installation instructions are provided upon delivery of this kit.
Proudly Made In The USA!
99771515-A -- 2200 Wedge Kit
$1,650.00
Corn Head Brand: IH
Corn Head Models: 2206, 2208, 2212
Combine Brand: IH
Combine Models: 7010, 8010, 7120, 8120, 9120, 7230, 8230, 9230, 7240, 8240, 9240
Installation Notes: This adapter mounts into the feeder house section of the corn head. The bottom wedge bolts on using the existing holes. The top wedge plates will require you to drill, and tap, holes to secure those wedge plates into place. Installation instructions are provided upon the delivery of this kit.
Proudly Made In The USA!
99771538-A -- JD Corn Head to IH AFX Flagship, or NH CR, Combine
$1,950.00
Corn Head Brand: JD
Corn Head Models: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294 (WILL NOT FIT HIGH-TIN 40 SERIES)
Combine Brand: IH & NH (CNH)
Combine Models: 7010, 8010, 7120, 8120, 9120, 7230, 8230, 9230, 7240, 8240, 9240
Proudly Made In The USA!
99771569-A -- Adapter - Agco Combine to JD Cornhead
$2,250.00
Corn Head Brand: JD
Corn Head Models: 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294, 606, 606C, 608, 608C, 612, 612C, 616, 616C, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C12F, C16R, C16F
Combine Brand: Agco / Gleaner
Combine Models: R40, R50, R60, R70, R42, R52, R62, R72, R55, R65, R75, R66, R76, A65, A75, A85, A66, A76, A86, S67, S77, S68, S78, S88, S96, S98
Other Notes: Only works on "C" series corn heads if the filler plates are in place
Installation Notes: This adapter gets mounted into the feeder house section of the corn head via bolts. This adapter requires minimal fabrication, and can be adjusted for different models of combines using the filler plates provided in the kit. Installation instructions will be provided upon delivery of this kit.
Proudly Made In The USA!
