86562752-N -- Straw Chopper Blade - Hardened, Set of 4
$66.37
Models/Applications:,TR89,TR97 SN(555803),TR98,TR99,TX36
Replaces:86562752
86570955-N -- Clean Grain Elevator Chain - 82-Link Paddle 4th link CA550
$389.48
Models/Applications:, TR99
Replaces:86570955
86574855-N -- Feeder House Chain - CA550HD 91-Links 30-Slats
$978.84
Models/Applications:,TR75 SN(304700),TR85 SN(308000),TR86,TR87,TR88,TR89,TR96 SN(529799),TR97,TR98,TR99
Replaces:86574855
86583943-N -- Drive Coupling
$68.35
Models/Applications:2200 Series, 2206, 2208, 2212
Replaces:86583943
86584737-N -- Wear Bar - LH (Set Of 2)
$63.50
Models/Applications:, CR9040, CR9060, CR920, CR940, CR960, TR70, TR75, TR85, TR86, TR87, TR88, TR89, TR95, TR96, TR97, TR98, TR99
Replaces:86584737
86584738-N -- Wear Bar - RH (Set Of 2)
$63.84
Models/Applications:, CR9040, CR9060, CR920, CR940, CR960, TR70, TR75, TR85, TR86, TR87, TR88, TR89, TR95, TR96, TR97, TR98, TR99
Replaces:86584738
86584739-N -- Wear Bar - LH Hardened (Set Of 2)
$131.24
Models/Applications:, CR920, CR940, CR960, TR70, TR75, TR76, TR85, TR86, TR87, TR88, TR89, TR96, TR97, TR98
Replaces:86584739
86584740-N -- Wear Bar - RH Hardened (Set Of 2)
$144.59
Models/Applications:, CR920, CR940, CR960, TR70, TR75, TR76, TR85, TR86, TR87, TR88, TR89, TR96, TR97, TR98
Replaces:86584740
86611369-N -- Idler Sprocket Support Bracket
$49.98
Models/Applications:2200 Series, 3206, 3208, 3212, 3406, 3408, 3412, 2206, 2208, 2212, 2406, 2408, 2412
Replaces:86611369
86611418-N -- Knife - Weed
$21.29
Models/Applications:2200 Series, 2206, 2208, 2212, 2406, 2408, 2412
Replaces:86611418
86615134-N -- Button Head Torx Bolt -- (Z-1225-TX)
$3.72
This OEM-spec CNH bolt (PN 86615134-N) is a Torx head, M12 × 1.75 × 25 mm, Class 10.9 fastener used across a wide range of Case IH and New Holland equipment. The high-strength 10.9 rating delivers reliable clamping force in high-vibration areas like driveline covers, guards, and general hardware locations. Sold individually.
Features
Genuine-spec replacement for CNH 86615134 or Z-1225-TX
Torx head for secure drive and reduced cam-out
Class 10.9 high-strength steel for demanding applications
M12 × 1.75 pitch × 25 mm length
Common across Case IH & New Holland combines and other equipment
Specs
Head type: Torx
Thread size: M12 × 1.75
Length (under head): 25 mm
Strength: Class 10.9
Quantity: 1 bolt
Install: Torque to OEM service-manual specs
Notes
Always match thread size, length, and grade to the original fastener.
If replacing multiple bolts in a critical assembly, replace as a full set where recommended.
86623219-N -- Lower Unloading Auger Gearbox Shaft - 7.81" Long 8/21 Teeth
$77.42
Models/Applications:, AFX8010, 5088, 7010, 7088, 7120, 8010, 8120, 9120, CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080, CX8090
Replaces:86623219
86627639-N -- Unloading Drive Idler Sprocket - 15 tooth
$25.20
Models/Applications:, CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080, CX8090
Replaces:86627639
868-112HRPSSB11220 -- 1-1/2"SQX20' STEEL SHAFT-ROUND CORNER
$38.47
1-1/2"SQX20' STEEL SHAFT-ROUND CORNER
