864-SMA280317 -- LH SEED BOOT FOR JD DRILLS - WEAR COAT
$52.20
LH SEED BOOT FOR JD DRILLS - WEAR COAT
Left hand, heat treated, ductile iron seed boot. Fits 750 and 1850 grain drills. Tunsten carbide wear coated.
Brand
AgSmart
864-SMA280446 -- RH SEED BOOT FOR 750 & 1850 DRILLS
$49.32
RH SEED BOOT FOR 750 & 1850 DRILLS
Heat treated, ductile iron seed boot. Fits JD 750 and 1850 grain drills. Will replace N280446.
Brand
AgSmart
864-SMA280447 -- LH SEED BOOT FOR 750 & 1850 DRILLS
$50.30
LH SEED BOOT FOR 750 & 1850 DRILLS
Heat-treated, ductile iron seed boot. Fits 750 and 1850 JD grain drills. Will replace N280447.
Brand
AgSmart
864-SMA280648 -- BUSHING FOR JD GRAIN DRILL N280648
$13.05
BUSHING FOR JD GRAIN DRILL N280648
Top inner bushing for closing wheel arm on 750 S/N 6001 up, 1560, 1590, 1850, 1860, 1890, 1895, 1990. .641 inch ID, 1 inch OD, 3.37 inch Long. Will replace JD N280648.
Length
1
Width
1"
Brand
AgSmart
864-SMA280975 -- SEAL FOR JD GRAIN DRILL BEARING
$3.00
SEAL FOR JD GRAIN DRILL BEARING
Made of foam, 2.18 inch OD, 1-1/2 inch ID.09 inch thick. Used on models 450, 455, 515, 520, 730, 730 LL, 740A, 1520, 9400. Will replace JD N280975.
864-SMA281241 -- HUB SEAL REAR 3-11/16" OD FOR JD DRILL
$12.13
HUB SEAL REAR 3-11/16" OD FOR JD DRILL
Hub Seal, Rear for JD Disc Drills. Measures 3-11/16 inch OD. Fits 1560,1590,1690,1835,1860,1890,1895,1990 drills, Replaces AN281241.
864-SMA2816 -- SPOOL FOR SUNFLOWER DISC - 2-3/8"
$39.00
SPOOL FOR SUNFLOWER DISC - 2-3/8"
2-3/8 inch Short Spool for 7-1/2 inch and 8-1/2 inch Spacing. Has 6 inch diameter base. Fits 1211, 1233, 1433 Tandem Discs. Replaces Sunflower SN2816.
Brand
FOR LANDOLL / SUNFLOWER
Product Category
Disc Spool
Width
2-3/8 Inch
For Axle Size
1-3/4 Inch Round
For Spacing
7-1/2 Inch & 8-1/2 Inch
864-SMA282108 -- RIGHT CONTROL ARM FOR JD DRILL
$91.42
RIGHT CONTROL ARM FOR JD DRILL
Depth Conrol Arm, Right Hand, Ffor JD Air Drill 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990. Replaces AN282108
864-SMA282109 -- LEFT CONTROL ARM FOR JD DRILL
$91.42
LEFT CONTROL ARM FOR JD DRILL
Depth Conrol Arm, Left Hand, Ffor JD Air Drill 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990. Replaces AN282109
864-SMA282110 -- CAST IRON CLOSING WHEEL FOR JD
$47.80
CAST IRON CLOSING WHEEL FOR JD
Cast Iron Closing Wheel. Fits 1560, 1590, 1690, 1860, 1890, 1895, 1990 Grain Drills. Replaces N282110.
Brand
AgSmart
864-SMA282115 -- PRESS WHEEL ARM STRAP FOR JD DRILL
$40.18
PRESS WHEEL ARM STRAP FOR JD DRILL
Press Wheel Arm Strap, For Closing system on John Deere Air Drills. Fits 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990. Replaces N282115
864-SMA282218 -- SPRING FOR JD PRESS WHEEL RH
$11.86
SPRING FOR JD PRESS WHEEL RH
Fits John Deere Drill(s): 1560, 1690, 1860, 1890, 1895, 1990Replaces John Deere OEM Number(s): N283994, N282888
Coil Width
1.34 Inch
Coil Diameter
3.22 Inch
Wire Size
0.33 Inch
Brand
AgSmart
864-SMA282219 -- SPRING FOR JD PRESS WHEEL LH
$11.44
SPRING FOR JD PRESS WHEEL LH
Fits John Deere Drill(s): 1560, 1565, 1590, 1690, 1860, 1890, 1895, 1990Replaces John Deere OEM Number(s): N283995, N282889
Coil Width
1.34 Inch
Coil Diameter
3.22 Inch
Wire Size
0.33 Inch
Brand
AgSmart
864-SMA282296 -- 1X10 HD V-TIRE PACKER WHEEL FOR JD
$29.64
1X10 HD V-TIRE PACKER WHEEL FOR JD
For 750, 1530, 1535, 1560, 1565, 1590, 1690, 1850, 1860, 1890, 1895 and 1990.Replaces AA38447, AN280966 and AN281359.
Width
1 Inch
Diameter
10 Inch
Uses Bearing
CG203KRR2
Tire Style
Rubber V-Shaped
Brand
AgSmart
