
AN102342-N -- Chain Sprocket
$131.63
Models/Applications:90 Series,493 SN(665200),494 SN(665200)
Replaces:AN102342

AN102382-N -- Coupler Sprocket - #60 chain 14 tooth
$106.41
Models/Applications:4400 Series, 6600 Series, 7700 Series, 8820, 9400 Series, 9500 Series, 9600 Series, 4400, 4420, 6600, 6620, 7700, 7720, 8820, 9400, 9410, 9500, 9510, 9600, 9610
Replaces:AN102382

AN102383-N -- Drive Coupler Chain Assembly
$18.62
Models/Applications:4400 Series, 6600 Series, 7700 Series, 8820, 9400 Series, 9500 Series, 9600 Series, 4400, 4420, 6600, 6620, 7700, 7720, 8820, 9400, 9410, 9500, 9510, 9600, 9610, 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:AN102383

AN102448-N -- Idler Sprocket - Non-Greaseable
$14.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 1244, 2206, 2208, 2212, 3206, 3208, 3212, 3406, 3408, 3412, 974, 493, 494, 693, 694, 893, 894, 1293, 1294
OEM Brand: IH, JD, NH
Reference Number(s): AN102448, 587300, 745023, 745023, 176283C91, 84549635, 86583947, 87034967
Material: Non-greaseable idler sprocket - 8 teeth - CA555 Chain
Other Notes: 2 idler sprockets required per row

AN102448-U -- Idler Sprocket - Non-Greaseable - USA MADE
$18.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 1244, 2206, 2208, 2212, 3206, 3208, 3212, 3406, 3408, 3412, 974, 493, 494, 693, 694, 893, 894, 1293, 1294
OEM Brand: IH, JD, NH
Reference Number(s): AN102448, 587300, 745023, 745023, 176283C91, 84549635, 86583947, 87034967
Material: Non-greaseable idler sprocket - 8 teeth - CA555 Chain
Other Notes: 2 idler sprockets required per row
MADE IN THE USA!!!

AN71326-N -- Drive Sprocket Shaft Oil Seal
$3.25
Models/Applications:40 Series, 90 Series, 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294
Replaces:AN71326

AP24354-N -- Flanged Idler Pulley - 7.000" OD .625" ID 1.312" wide
$39.19
Models/Applications:45,55,95,105,105,45,55 SN(57001),6601,6602,95 SN(9001,)
Replaces:AP24354

AP24395-N -- Idler Pulley - Flat Pulley 4-1/2" OD 1" Wide 1/2" ID
$42.67
Models/Applications:6600 Series, 6602, 6622
Replaces:AP24395

AR39052-N -- Drive Sprocket Shaft Oil Seal - Ruberized Outer Ring
$6.35
Models/Applications:40 Series, 90 Series, 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294
Replaces:AR39052

AXE10905-N -- 600 / 700 Series / C Series - Center Snout 30''
$295.00
Models/Applications: 606, 608, 612, 616, 706, 708, 712, 716, C6R, C8R, C12R, C16R
Replaces: AXE10905


AXE10906WS -- Wear Strip - JD 30" OE Divider - 600, 700, C SERIES (Stainless Steel 4-1/2" High 16...
$34.00
Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 616C, 706, 706C, 708, 708C, 712, 712C, 716, 716C, 718, 718C, C6R, C8R, C12R, C12F, C16R, C16F, C18R
OEM Brand: JD
Reference Number(s):
Part Features: Stainless steel wear strip to help prolong the life of your divider by protecting the plastic from cracking
Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers
Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it - get it free of any debris. Take some silicone and put about an 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.
Material: USA Stainless Steel
Proudly Made In The USA!

AXE10906WSB -- 600, 700, "C" SERIES DIVIDER WEAR PATCH - LARGE (18.5" Long x 6.75" Tall)
$42.00
Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C16R, C18R
OEM Brand: JD
Reference Number(s): 83758
Part Notes: This part will cover, and replace, aftermarket poly patches. Stainless steel, these patches will not allow the screws to pull through the part while chaff builds up behind it. Kit includes screws to mount the wear strip.
Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers
Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it. Get it free of any debris. Take some silicone and put about 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.
Material: USA Stainless Steel
PROUDLY MADE IN THE USA!


AXE18070-N -- Vertical Unloading Auger
$885.00
Models/Applications:S600 Series, S660, S670, S680, S690
Replaces: AXE18070

AXE18770-N -- AXE63766-N -- Idler Sprocket - 6 Tooth 600 Series SN(745101 -)
$38.00
Models/Applications: 604C, 605C, 606 (745101 -), 606C (745101 -), 607C, 608 (745101 -), 608C (745101 -), 608FC (129189 -), 608C Precision Upgrade, 609C, 610C, 611C, 612C (745101 -), 613C, 614C, 615C, 616, 616C, 617C, 618, 618C, 624C, 627C
Replaces: AXE18770, AXE63766
OEM Brand: JD


AXE29353-N -- Feeder House Bottom - Machines with Hydraulic Fore / Aft Tilt
$775.00
Models/Applications:S660, S670, S680, S690, S760, S770, S780, S785, S790
Replaces:AXE29353