R86457-N -- Deck Plate Indicator Shaft Support
$2.85
Models/Applications:600 Series, 606, 608, 612
Replaces:R86457
RP1/2X2 -- Stalk Roll Spring Pin 1/2" x 2"
$1.55
Models/Applications:40 Series, 90 Series, 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294
Replaces:61319
RP1/2X21/2 -- Slotted Spring Pin 1/2 x 2-1/2
$1.14
Models/Applications:40 Series, 90 Series, 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294
Replaces:61318
RP5/16X2 -- Stalk Roll Spring Pin 5/16" x 2"
$0.75
Models/Applications:40 Series, 90 Series, 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294
Replaces:61290
ST205A-N -- Stalk Roll Driven Shaft Bearing
$6.75
Models/Applications:800 Series, 843, 844, 863, 864, 883, 884
Replaces:ST205A
VH04240824 -- Hydraulic Deck Plate Indicator Assembly Cable Push Pull Tab
$3.75
Models/Applications:900 Series, 1000 Series, 40 Series, 90 Series, 943, 963, 983, 944, 964, 984, 1043, 1063, 1083, 1044, 1064, 1084, 443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 694, 894, 1294
Replaces:
W10000010A -- John Deere Wedge with PTO Shafts Hex Both Ends
$1,500.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244
OEM Brand: JD
Part Features: This wedge kit helps provide a more optimal operating level to your corn head by flattening it out
Kit Includes: Wedge kit with PTO shafts
Warning: Not applicable to heads mounting on 'Side Hill' combines
Installation Instructions: This wedge kit mounts on the base of the feeder house section of the corn head using bolts. Minimal, to no, fabrication required. Installation instructions to be provided upon delivery of this kit.
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!
W10000015A -- John Deere Wedge with PTO Shafts Hex Clamp 21-Spl Couple
$1,500.00
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244
OEM Brand: JD
Part Features: This wedge kit helps provide a more optimal operating level to your corn head by flattening it out
Kit Includes: Wedge kit with PTO shafts
Warning: Not applicable to heads mounting on 'Side Hill' combines
Installation Instructions: This wedge kit mounts on the base of the feeder house section of the corn head using bolts. Minimal, to no, fabrication required. Installation instructions to be provided upon delivery of this kit.
Material: USA Steel
Finish: Powder Coat - Black
Proudly Made In The USA!
W10000016A -- PTO Shaft & Hanger Kit Hex Both Ends
$454.31
Models/Applications:800 Series, 900 Series, 1000 Series, 40 Series, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:
W10000017A -- PTO Shaft & Hanger Kit Hex Clamp & 21 Spl. Coupler
$440.00
Models/Applications:800 Series, 900 Series, 1000 Series, 40 Series, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:
W10000018A -- PTO Shaft Bearing Hanger Kit 1-1/8'' Bearing
$65.00
Models/Applications:800 Series, 900 Series, 1000 Series, 40 Series, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:
W10000019A -- PTO Shaft Bearing Hanger Kit 1-1/4'' Bearing
$65.00
Models/Applications:800 Series, 900 Series, 1000 Series, 40 Series, 843, 863, 883, 844, 864, 884, 943, 963, 983, 944, 964, 984, 1063, 1083, 1064, 1084, 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:
W10000020A -- John Deere Wedge without PTO Shafts
(Not applicable to heads mounting on 'Side Hill...
$475.00
Models/Applications:40 Series, 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:
W1000003 -- Wedge Spacer
$29.17
Models/Applications:40 Series, 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:
W1000006 -- Wedge Hold Down
$8.01
Models/Applications:40 Series, 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces:
"And on the 8th day, God looked down on his planned paradise and said, "I need a caretaker." So, God made a Farmer." - Paul Harvey
