John Deere 9570STS Combine

V-BOLT FOR HARROW TOOTH 3/8" Fits John Deere Finishing Harrow Models 400, 600, 610 and 810; Noble Do-All; Case International Harrow/Do-All Models 468 and 568 and Wil-Rich Seed-bed Finisher (Do-All). 1-1/8" between the legs, 1.51" C-C.

FROG FOR JOHN DEERE LISTER Frog for John Deere Lister Moldboard. Brand AgSmart

14X5/16 JD HF LISTER SHARE John Deere HARDSURFACED Lister Share.HAS 4 INCH BOLT SPACING.........THE 287 HAS 4 1/4 BOLT SPACING Brand AgSmart

LISTER SHARE 14" JD DURAFACED 14'X5/16 JOHN DEERE LISTER SHARE HARDFACED...HAS 4 1/4 INCH BOLT SPACING

4X12 NYLON ASSEMBLY W/SMOOTH CROWN TIRE 4 x 12 Nylon Wheel Assembly with 5203KYY2 double row bearing. Fits John Deere Model 856 and Krause 4600 Row Crop Cultivators. Application Row Crop Cultivator Product Type Gauge Wheel Width 4 Inch Height 12 Inch Brand AgSmart

RETAINING RING JD, KMC, FC HIPPER For SMA15141 John Deere & SMA764 Forrest City housings. OD is 3.312". Will replace JD 32184, KMC 06-050-001. Brand FOR OTHER MAKES Product Category Retaining Ring O.D. 3-5/16 Inch

The LANSS21466 is a double jack stand kit for John Deere® 600, 700, & C Series corn heads. This kit is recommended for any John Deere® 600, 700, & C Series corn heads equipped with Lankota Generation 3 Stalk Stompers® OR John Deere® OEM Stalk Deflectors. This stand kit will reduce excessive Stalk Stomper/Deflector spring tension during long periods of header storage. No drilling, cutting or welding required. Installation Instructions

The LANSS14512 is a complete Stalk Stomper® kit (mount, hardware & shoe for 1 row) with Poly for 2011 and older John Deere® 600 Series corn heads. This kit will fit any John Deere® factory 600 Series corn head, 2011 and older, accommodating all spacing configurations. The Lankota Generation 3 Stalk Stompers® shoe (LANSS231) and mount (LANSS21451) are interchangeable with John Deere® original shoe and mount. Lankota's LANSS21466 jack stand kit is recommended, but not required. Installation Instructions

The LANSS231 is Lankota's Generation 3 Stalk Stomper® with poly assembly. The LANSS231 is interchangeable with John Deere® Stalk Deflectors (AXE87969) and mount (AXE86614) within their kit (BXE11362). This Stalk Stomper® is included in the LANSS11362 & LANSS14512 kits. Lankota's LANSS21466 jack stand is recommended, but not required.

The LANAUG702K is an unloading auger extension kit for John Deere® 50 Series and older combines (model numbers 6620 to 9750). It also fits any CTS combine. This kit extends the length of the factory unloading auger by 3'. The LANAUG702K is not for use with John Deere® 60, 70, or S Series High Unloading Rate (HUR) augers. For John Deere® 60, 70, & "S" Series combines with 13.5" standard auger (non-HUR), order the LANAUG1135K For John Deere® 60, 70, & "S" Series combines with 17" High Unloading Rate auger (HUR), order the LANAUGHURK For Case IH® combine augers, order the LANAUGCIHK Installation Instructions

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD4000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD4000K fits John Deere® combine models 00, 10,and all 50 Series Walker combines. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 HUR = High Unload Rate Recommended Seasonal Maintenance Video

Our unloading auger clutch system is an electromagnetic clutch system for the unloading auger system on John Deere® combines. This system allows the combine operator to empty out the unloading auger without having to unload the grain tank, which greatly reduces the wear and tear on unloading auger swing components. The LANUDJD2000K is simple to install. The system is operated with a foot switch in the cab, leaving your hands free to operate the combine. The LANUDJD2000K fits John Deere® combine models S680, S780, S690, & S790. Lankota grain tank cross auger shut off kits for John Deere® combines LANKOTA Kit # Models Covered Sprocket QTY LANUDJD1000K HUR **60-S770 Series combines No. 60 - 60 Teeth 2 LANUDJD2000K S680, S780, S690, & S790 Series combines No. 80 - 40 Teeth 2 LANUDJD3000K NON-HUR **60-S770 & 50 Series STS combines No. 60 - 49 Teeth 2 LANUDJD4000K **00 & *10, & 50 Series Walker combines No. 60 - 49 Teeth 2 *HUR= High Unload Rate   Lankota Seasonal Recommended Maintenance Video

Models/Applications: 606, 606C, 608, 608C, 612, 612C, 616, 706, 706C, 708, 708C, 712, 712C, 716, 716C, C6R, C8R, C12R, C16R, C18R OEM Brand: JD Reference Number(s): 83758 Part Notes: This part will cover, and replace, aftermarket poly patches. Stainless steel, these patches will not allow the screws to pull through the part while chaff builds up behind it. Kit includes screws to mount the wear strip.  Other Notes: For JD 600, 700, "C" series model corn heads - 30" Row Centers Installation Notes: We recommend that prior to installing this wear strip you clean off the plastic where you are going to mount it. Get it free of any debris. Take some silicone and put about 1/8" bead around the edge of the wear strip. Install in place. The silicone helps hold the wear strip in place during installation, and it also helps seal the strip to the plastic.  Material: USA Stainless Steel PROUDLY MADE IN THE USA! Why Choose ROBUUST® by Landbouw™Built under the Landbouw™ name, this ROBUUST® part is Made in the USA using premium, high-wear materials specifically chosen to outperform standard OEM parts. From design to delivery, every ROBUUST® component is engineered for maximum durability and long-term reliability in the harshest field conditions. This isn’t just a replacement — it’s an upgrade. ROBUUST® means you spend more time harvesting and less time wrenching, with parts that hold up season after season. Landbouw™ is rooted in Dutch heritage and American grit — delivering serious solutions for serious farmers. Whether you're pushing through mud, dust, or dry stalks, our mission is to keep your equipment running strong and your operation moving forward. When performance matters, go ROBUUST®.

PTO Drive Shaft - Contour Master to fit John Deere Header requires 2 drivelines per head *PTO Shafts are priced individually Models/Applications: 492, 493, 494, 592, 594, 692, 693, 694, 892, 893, 894, 1092, 1290, 1291, 1293, 900D, 900F, 900P, 900R, 913, 915, 918, 920, 922, 924, 925, 930, 930F Replaces: AH220096

Stalk Roll, Right Hand for JD 600 Series Cornhead, HXE41141 (Late, Opposed Austempered to 45 HRC) Models/Applications: 606 (ASN 740312), 606C (BSN 745100), 608 (ASN 740474), 608C (BSN 745100), 608FC (ASN 129189), 612 (ASN 740750), 612C (BSN 745100), 612FC, 616, 616C, 618, 618C, 706C, 708C, 708FC, 712C, 712FC, 716C, 718C Replaces: HXE41142 Enhance your harvesting efficiency with the New Aftermarket Opposing Stalk Rolls, which are expertly designed for superior crop residue processing. This high-performance Stalk Roll features a knife roll that shreds stalks and residue into a confetti-like form, ensuring finer and more manageable crop residue. Constructed for durability, it effectively handles and processes corn and other crops, minimizing the need for further fieldwork. Its robust build is ideal for harsh field conditions, making it a reliable choice for main