Replace a cracked, worn, or damaged center divider hood with a durable, American-made aftermarket replacement built for harvest. The Landbouw™ AXE10906-N is designed to replace John Deere® part number AXE10906 on compatible 30-inch-row corn heads.
Molded in the USA from high-impact LLDPE (Linear Low-Density Polyethylene), this divider hood delivers the toughness and flexibility needed to handle crop pressure, field debris, and everyday harvest wear.
This is the molded center crop-divider hood—not the front snout point. All bushings required for the divider hood are included. Other mounting hardware required for installation is not included.
Optional Aftermarket Wear Protection: An OEM wear strip is not part of the original AXE10906 divider hood. Some operators add aftermarket stainless-steel wear protection to high-contact areas, and previously repaired hoods may already have an aftermarket strip installed. Landbouw offers optional wear strips and patch components separately for customers who want additional protection.
View Optional Aftermarket Wear Protection:
Large Patch
Small Patch
Key Features and Benefits
-
Direct Replacement for AXE10906: Designed to replace the factory 30-inch center divider hood on compatible John Deere® corn heads.
-
Correct Divider-Hood Component: Replaces the molded center crop-divider hood, not the separate front snout point.
-
Required Bushings Included: Comes with all bushings required for the divider hood.
-
Durable LLDPE Construction: Molded from LLDPE for a practical combination of toughness, flexibility, and impact tolerance in demanding harvest conditions.
-
Made in the USA: Manufactured in Rock Valley, Iowa, using precision tooling for dependable fit and consistent quality.
-
Cost-Effective Aftermarket Replacement: Restore your corn head without paying dealership pricing for the equivalent replacement hood.
John Deere® Corn Head Fitment
The AXE10906-N fits the following John Deere® 30-inch-row corn heads when originally equipped with OEM part number AXE10906:
600 Series Corn Heads
- 606
- 606C
- 608
- 608C
- 612
- 612C
- 616
- 616C
For applicable 606 through 612C models, verify that the corn head is after serial number 745101.
600 Series Folding Corn Heads
- 608FC — after serial number 129189
- 612FC
700 Series Corn Heads
700 Series Folding Corn Heads
C-Series Corn Heads
- C6R
- C8R
- C12R
- C16R
- C8F
- C12F
- C16F
Fitment Notice: Model names alone may not confirm compatibility. John Deere® used different divider components depending on serial number and corn-head configuration. Verify that your existing hood references AXE10906 before ordering.
Technical Specifications
-
Landbouw Part Number: AXE10906-N
-
OEM Reference Number: AXE10906
-
Component Type: Center crop-divider hood
-
Row Spacing: 30 inches
-
Material: LLDPE (Linear Low-Density Polyethylene)
-
OEM Compatibility: John Deere®
-
Required Hood Bushings: Included
-
Other Mounting Hardware: Not included
-
OEM Wear Strip: Not used or included
-
Optional Aftermarket Wear Protection: Available separately
-
Country of Origin: Made in the USA
What Is Included?
This listing includes:
- One AXE10906-N molded center divider hood
- All bushings required for the divider hood
This listing does not include:
- The remaining mounting hardware required for installation
- The front snout point or other divider components
- Optional aftermarket wear strips or stainless-steel patch components
Reuse your existing mounting hardware if it remains serviceable, or purchase the necessary replacement hardware separately.
Frequently Asked Questions
Is AXE10906-N a snout point?
No. AXE10906-N is the molded center crop-divider hood. The forward snout point is a separate component and is not included.
Are the bushings included?
Yes. The divider hood comes with all bushings required for the hood itself.
Is the other mounting hardware included?
No. Other hardware needed to mount the hood to the corn head is not included. Existing serviceable hardware may be reused, or replacement hardware can be purchased separately.
Does this divider hood use an OEM wear strip?
No OEM wear strip is part of the original AXE10906 hood. Landbouw offers optional aftermarket wear strips and patch components for operators who want added protection in high-contact areas, but they are not required and are sold separately.
Does AXE10906-N fit folding corn heads?
Yes, it fits specific folding models, including the 608FC after serial number 129189, 612FC, 708FC, and 712FC. Always confirm that the mounting position being repaired originally uses AXE10906.
How should I verify fitment before ordering?
Compare your existing part with OEM reference number AXE10906 and verify the corn-head model, configuration, and serial number. Contact Landbouw if you need help confirming compatibility.
John Deere® is a registered trademark of Deere & Company. OEM names, trademarks, models, and part numbers are used for identification and compatibility purposes only. Landbouw™ is not sponsored, approved, or affiliated with Deere & Company.
