PRHF-90A -- RH Fender Assembly, IH Red
$396.52
Models/Applications:900 Series, 1000 Series, 943, 963, 983, 1043, 1063, 1064, 1083, 1084
Replaces:176234C94
PS30-40A -- Narrow Row Center Snout with Point - 30" JD Green
$212.98
Models/Applications:40 Series, 443, 643, 843, 1243
Replaces:
176233C93 -- PLHS-90A -- LH Fender Snout Assembly, IH Red
$225.00
Models/Applications: 843, 863, 883, 943, 963, 983, 1043, 1063, 1064, 1083, 1084
OEM Brand: IH
Reference Number(s): 176233C93, 320084A1P
Part Notes: This part will fit onto existing OEM steel fenders, OEM poly fenders, and POLYTIN™ fenders - Left Hand
Material: Poly
Color: OEM Red
PROUDLY MADE IN THE USA!
N102080-N -- Weed Knife - RH Tapered Rolls
$37.50
Models/Applications: 443, 643, 843, 1243, 444, 644, 844, 1244
Replaces: N102080
N102081-N -- Weed Knife - LH Tapered Rolls
$37.50
Models/Applications:443, 643, 843, 1243, 444, 644, 844, 1244
Replaces: N102081
87528030-N -- Stainless Steel Repair Kit - 2200, 2400, 2600, 3200, 3400 Series
$59.00
Models/Applications: 2206, 2208, 2212, 2406, 2408, 2412, 2606, 2608, 2612, 3206, 3208, 3212, 3406, 3408, 3412
OEM Brand: IH
Part Notes: This repair kit will fit on 30", 36", and 38" row spacings
Installation Notes: Prior to installation we recommend cleaning the poly free of debris. Mark and drill the holes in the poly where needed. Apply a layer of silicone around the edge of the stainless patch and a glob in the center. Carefully, place the stainless patch onto the poly and secure in place using the hardware provided.
Material: USA Stainless Steel
PROUDLY MADE IN THE USA!
80571104 -- Wear Strip - Fender/30-38" Divider Hood IH
$34.00
Models/Applications: 2206, 2208, 2212, 2406, 2408, 2412, 2606, 2608, 2612, 3406, 3408, 3412, 996, 96C, 98C, 98D
OEM Brand: IH & NH
Part Notes: SS wear strip that mounts onto the fender and 30"-38" divider hood
Material: SS
MADE IN THE USA!
80991005 - End Deflector Kit - Corn Head
$165.00
End Deflector Kit - Corn Head
*Sold as a single side
30-BI-40S-CA-GN -- 30" Bi-Fold Complete Center Assembly - 40 Series (Divider & Snout) - JD Green
$935.00
30" Bi-Fold Complete Center Assembly - 40 Series (Divider & Snout) - JD Green
91261800 -- 1 1/8" Hex coupler (4 1/2" long)
$44.00
Models/Applications: 443, 643, 843, 1243, 693, 893, 1293, 694, 894, 1294, 1043, 1063, 1083, 1044, 1064, 1084
OEM Brand: JD, IH, NH
Reference Number(s):
Part Notes: 1-1/8" hex coupler 4-1/2" long - use for splicing 1-1/8" hex shafts
Finish: Black Oxide
AXE18770-N -- Idler Sprocket - 6 Tooth 600 Series SN(745101 -)
$34.79
Models/Applications: 606 (745101 -), 606C (745101 -), 608 (745101 -), 608C (745101 -), 608FC (129189 -), 612C (745101 -), 616, 616C, 618, 618C
Replaces: AXE18770
AH145940-N -- Auger Drive Sprocket - 50 Chain 65 Tooth 1-1/8'' Hex
(Used in Auger Slow Down Kit)
$166.50
Models/Applications:443, 643, 843, 1243, 444, 644, 844, 1244, 693, 893, 1293, 644, 844, 1244
Replaces:
99771515-A -- 2200 Wedge Kit
$1,375.00
Corn Head Brand: IH
Corn Head Models: 2206, 2208, 2212
Combine Brand: IH
Combine Models: 7010, 8010, 7120, 8120, 9120, 7230, 8230, 9230, 7240, 8240, 9240
Installation Notes: This adapter mounts into the feeder house section of the corn head. The bottom wedge bolts on using the existing holes. The top wedge plates will require you to drill, and tap, holes to secure those wedge plates into place. Installation instructions are provided upon the delivery of this kit.
Proudly Made In The USA!
1327208C1-N -- Stalk Roll Auger & Shaft Assy - LH W/Bearing
$142.86
Models/Applications: 1000 Series, 1063, 1083, 1064, 1084
Replaces: 1327208C1
199491C1-N -- Drive Shaft Oil Seal
$4.25
Models/Applications:800 Series, 900 Series, 1000 Series, 843, 844, 863, 864, 883, 884, 943, 944, 963, 964, 1063, 1064, 1083, 1084
Replaces:199491C1